Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 11 Dec 2008 12:09:08 +0100
From:      Gary Jennejohn <gary.jennejohn@freenet.de>
To:        Anton Yuzhaninov <citrin@citrin.ru>
Cc:        current@freebsd.org, Pyun YongHyeon <yongari@FreeBSD.org>
Subject:   Re: svn commit: r185756 - head/sys/dev/re
Message-ID:  <20081211120908.57f99124@ernst.jennejohn.org>
In-Reply-To: <4940115F.7080004@citrin.ru>
References:  <200812080248.mB82mfV9043154@svn.freebsd.org> <4940115F.7080004@citrin.ru>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 10 Dec 2008 21:58:39 +0300
Anton Yuzhaninov <citrin@citrin.ru> wrote:

> Pyun YongHyeon wrote:
> > Author: yongari
> > Date: Mon Dec  8 02:48:41 2008
> > New Revision: 185756
> > URL: http://svn.freebsd.org/changeset/base/185756
> > 
> > Log:
> >   Reduce spin wait time consumed in GMII register access routines.
> >   Waiting for 1ms for each GMII register access looks overkill and it
> >   may also decrease overall performance of driver because re(4)
> >   invokes mii_tick for every hz.
> >   
> >   Tested by:	rpaulo
> > 
> > Modified:
> >   head/sys/dev/re/if_re.c
> > 
> > Modified: head/sys/dev/re/if_re.c
> > ==============================================================================
> > --- head/sys/dev/re/if_re.c	Mon Dec  8 02:38:13 2008	(r185755)
> > +++ head/sys/dev/re/if_re.c	Mon Dec  8 02:48:41 2008	(r185756)
> > @@ -417,13 +417,12 @@ re_gmii_readreg(device_t dev, int phy, i
> >  	}
> >  
> >  	CSR_WRITE_4(sc, RL_PHYAR, reg << 16);
> > -	DELAY(1000);
> >  
> >  	for (i = 0; i < RL_TIMEOUT; i++) {
> > +		DELAY(30);
> >  		rval = CSR_READ_4(sc, RL_PHYAR);
> >  		if (rval & RL_PHYAR_BUSY)
> >  			break;
> > -		DELAY(100);
> >  	}
> >  
> >  	if (i == RL_TIMEOUT) {
> > @@ -445,13 +444,12 @@ re_gmii_writereg(device_t dev, int phy, 
> >  
> >  	CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) |
> >  	    (data & RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY);
> > -	DELAY(1000);
> >  
> >  	for (i = 0; i < RL_TIMEOUT; i++) {
> > +		DELAY(30);
> >  		rval = CSR_READ_4(sc, RL_PHYAR);
> >  		if (!(rval & RL_PHYAR_BUSY))
> >  			break;
> > -		DELAY(100);
> >  	}
> >  
> >  	if (i == RL_TIMEOUT) {
> 
> After this commit I see in logs errors:
> 
> Dec 10 21:37:42 citrin kernel: re0: PHY read failed
> Dec 10 21:38:05 citrin last message repeated 3 times
> Dec 10 21:38:44 citrin last message repeated 3 times
> Dec 10 21:38:44 citrin kernel: re0: link state changed to DOWN
> Dec 10 21:38:45 citrin kernel: re0: link state changed to UP
> Dec 10 21:38:55 citrin kernel: re0: PHY read failed
> Dec 10 21:39:38 citrin last message repeated 3 times
> Dec 10 21:39:38 citrin kernel: re0: link state changed to DOWN
> Dec 10 21:39:39 citrin kernel: re0: link state changed to UP
> Dec 10 21:40:09 citrin kernel: re0: PHY read failed
> Dec 10 21:40:21 citrin kernel: re0: PHY read failed
> Dec 10 21:41:03 citrin kernel: re0: PHY read failed
> 
> I tried to revert this patch - errors disappeared.
> 

I was seeing these errors too, but disabling MSI made them disappear.

---
Gary Jennejohn



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081211120908.57f99124>