Date: Thu, 12 Jul 2007 13:12:26 +1200 From: Andrew Thompson <thompsa@FreeBSD.org> To: David Wolfskill <david@catwhisker.org>, current@freebsd.org Subject: Re: Oddity with an(4): Channel reported by ifconfig is wrong Message-ID: <20070712011226.GB1285@heff.fud.org.nz> In-Reply-To: <20070711172448.GA42994@bunrab.catwhisker.org> References: <20070711172448.GA42994@bunrab.catwhisker.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 11, 2007 at 10:24:48AM -0700, David Wolfskill wrote: > This may be an off-by-one issue: I have two APs with the same SSID; > one on channel 1; the other on channel 6. But: > > g1-1(7.0-C)[1] uname -a > FreeBSD g1-1.catwhisker.org. 7.0-CURRENT FreeBSD 7.0-CURRENT #480: Wed Jul 11 09:44:13 PDT 2007 root@g1-1.catwhisker.org.:/common/S4/obj/usr/src/sys/CANARY i386 > g1-1(7.0-C)[2] > > g1-1(7.0-C)[3] ifconfig > xl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=9<RXCSUM,VLAN_MTU> > ether 00:08:74:e5:95:cb > media: Ethernet autoselect (none) > status: no carrier > fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=8<VLAN_MTU> > ether 46:4f:c0:76:40:41 > ch 1 dma -1 > fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > lladdr 44.4f.c0.0.30.76.40.41.a.2.ff.fe.0.0.0.0 > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 > inet6 ::1 prefixlen 128 > inet 127.0.0.1 netmask 0xff000000 > wi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 00:02:2d:5b:2c:78 > media: IEEE 802.11 Wireless Ethernet autoselect (none) > status: no carrier > ssid catwhisker channel 1 (2412 Mhz 11b) > stationname "FreeBSD WaveLAN/IEEE node" > authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit txpowmax 100 > bmiss 7 scanvalid 60 > > As you see, the an0 NIC (a PCMCIA part) is the only one in use (as > the miniPCI wi0 still doesn't associate). So wi is still not working at all? Can you post the log again with debug.wi set to 2. Does 'ifconfig wi0 scan' show anything? Andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070712011226.GB1285>