Date: Tue, 12 May 1998 13:20:48 +0300 From: Esa Karkkainen <ejk@edelfelt.albert.hit.fi> To: freebsd-stable@FreeBSD.ORG Subject: Cannot compile stable kernel Message-ID: <19980512132048.57027@albert.hit.fi>
next in thread | raw e-mail | index | archive | help
Hello I get the following error after all the objects have been compiled loading kernel isa.o: Undefined symbol `_isa_devtab_cam' referenced from text segment [ plus seven identical lines ] *** Error code 1 I grepped LINT for "cam" and didn't find anything related to cam scsi drivers. I usually use these commands to compile kernel cd /sys/i386/conf/ sudo config EDELFELT cd ../../compile/EDELFELT sudo make depend all (sometimes "depend all install" Here's the config file # EDELFELTin kustomoitu kerneli # machine "i386" cpu "I586_CPU" #cpu "I686_CPU" ident EDELFELT maxusers 20 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device #options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options NFS_NOSERVER #Disable the NFS-server code. options SYSVSHM options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options "CLK_USE_I586_CALIBRATION" options COMPAT_LINUX config kernel root on sd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 #options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM #device wfd0 #IDE floppy (LS-120) controller ahc0 options AHC_TAGENABLE options AHC_SCBPAGING_ENABLE options AHC_ALLOW_MEMIO controller scbus0 at ahc0 device sd0 disk sd0 at scbus0 target 0 disk sd1 at scbus0 target 1 #device od0 #See LINT for possible `od' options. #device st0 device cd0 #Only need one of these, the code dynamically grows #controller pnp0 #device pcm0 at isa? port 0x220 tty irq 5 drq 1 flags 0x15 vector pcmintr controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 #device awe0 at isa? port 0x620 device opl0 at isa? port 0x388 # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options MAXCONS=5 # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device fxp0 pseudo-device loop pseudo-device ether pseudo-device log #pseudo-device sl 1 #pseudo-device ppp 1 pseudo-device vn 1 #pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's pseudo-device ccd 1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980512132048.57027>