Date: Mon, 27 Jun 2022 18:27:07 +0200 From: Michael Gmelin <grembo@freebsd.org> To: Ivan Quitschal <tezeka@hotmail.com> Cc: Hans Petter Selasky <hps@selasky.org>, "freebsd-current@freebsd.org" <freebsd-current@freebsd.org>, "wulf@freebsd.org" <wulf@freebsd.org>, "grembo@freebsd.org" <grembo@freebsd.org>, "imp@bsdimp.com" <imp@bsdimp.com> Subject: Re: iichid/hms keyboard/mouse wrongly reattached to uhid/ums Message-ID: <20220627182707.5b7ed9cd.grembo@freebsd.org> In-Reply-To: <CP6P284MB190046AC1EBBB9F6B4123246CBB99@CP6P284MB1900.BRAP284.PROD.OUTLOOK.COM> References: <CP6P284MB1900818F505F78F68EC4C6BECBB99@CP6P284MB1900.BRAP284.PROD.OUTLOOK.COM> <420b1f58-09c4-6876-b1ad-91751c60e83c@selasky.org> <CP6P284MB190046AC1EBBB9F6B4123246CBB99@CP6P284MB1900.BRAP284.PROD.OUTLOOK.COM>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 27 Jun 2022 16:18:58 +0000 Ivan Quitschal <tezeka@hotmail.com> wrote: > > Hi, > > > >Can you dump "kldstat" at the different times? > > >I guess it may be just be that the wrong module is loaded first, so > >it grabs the device, because there are no other drivers loaded, even > >though ums is a generic driver. > > >Try loading all relevant drivers in /boot/loader.conf . Then the > >attach order shouldn't matter. > > >--HPS > > > Hi Michael > > Yes , hw.usb.usbhid.enable="1" is in loader.conf , not sysctl > > Hi Warner > > When ums.ko is up, the second attach is always taken by "ums" first > no matter what. First time you boot tho, it takes the correct one > (hms) > > Hi Hans > > Looks like this below is the only order I could make it work even tho > uhid and usbhid get loaded regardless what I put on loader.conf > > usbhid_load="NO" <-- still loaded anyway > uhid_load="NO" <-- still loaded anyway > ums_load="NO" <- this one is not loaded > ic_load="YES" > iichid_load="YES" > hidbus_load="YES" > hsctrl_load="YES" > hidmap_load="YES" > hcons_load="YES" > hkbd_load="YES" > hms_load="YES" > hmt_load="YES" > hconf_load="YES" > > hw.usb.usbhid.enable="1" > > with the order below , after 5 reboots and lots of kvm switches , it > always ended up on the right iichid device. Seems to be working now > > but like I said, its random, let see after some more reboots if this > rule is still valid I don't know if it makes any difference in your case, but I had best results loading these drivers through rc.conf, e.g.: sysrc kld_list+="hidraw hkbd" Cheers Michael -- Michael Gmelin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20220627182707.5b7ed9cd.grembo>