Date: Fri, 21 Dec 2001 17:51:36 -0600 From: "Mario Doria" <madd@tecdigital.net> To: <stable@freebsd.org> Subject: Samba's NMBD dumps core with FreeBSD 4.4-STABLE Message-ID: <004201c18a7a$707280c0$0a00a8c0@gandalf>
next in thread | raw e-mail | index | archive | help
Update #2. After testing with sources from 12/07/01, nmbd works perfectly. The problem is that when you access an alias address, nmbd will dump core and stop working. So, something changed between 12/07 and 12/19 that broke nmbd working with alias interfaces. What should I do? Here's ifconfig output: sdf-1# ifconfig fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether 00:b0:d0:aa:82:cf media: Ethernet autoselect (none) status: no carrier fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.25.165.1 netmask 0xffffff00 broadcast 10.25.165.255 inet 10.25.165.2 netmask 0xffffffff broadcast 10.25.165.2 inet 10.25.165.3 netmask 0xffffffff broadcast 10.25.165.3 ether 00:02:b3:1b:49:71 media: Ethernet autoselect (100baseTX) status: active xl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether 00:01:02:ed:26:dc media: Ethernet autoselect (100baseTX) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 Here's my DMESG output (sources 12/07/01): Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #0: Fri Dec 21 17:29:52 CST 2001 madd@sdf-1.tecdigital.net:/usr/obj/usr/src/sys/SDF-1 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (728.44-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 805298176 (786424K bytes) config> q avail memory = 779190272 (760928K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Changing APIC ID for IO APIC #1 from 0 to 3 on chip Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc033b000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc033b09c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00fc320 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 0 -> irq 2 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=0962)> at device 2.0 on pci0 IOAPIC #1 intpin 15 -> irq 5 IOAPIC #1 intpin 14 -> irq 10 pci1: <PCI bus> on pcib1 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xfc00-0xfcff mem 0xfcfff000-0xfcffffff irq 5 at device 4.0 on pci1 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem 0xfcffe000-0xfcffefff irq 10 at device 6.0 on pci1 aic7880: Ultra Single Channel A, SCSI Id=7, 16/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe101000-0xfe101fff irq 2 at device 8.0 on pci0 fxp0: Ethernet address 00:b0:d0:aa:82:cf inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <ATI model 4759 graphics accelerator> at 14.0 isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 12 -> irq 11 IOAPIC #1 intpin 10 -> irq 12 pci2: <PCI bus> on pcib2 fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdcc0-0xdcff mem 0xf5000000-0xf50fffff,0xf5100000-0xf5100fff irq 11 at device 6.0 on pci2 fxp1: Ethernet address 00:02:b3:1b:49:71 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xf5101000-0xf510107f irq 12 at device 8.0 on pci2 xl0: Ethernet address: 00:01:02:ed:26:dc miibus2: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus2 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: unable to allocate the IRQ resource (12). vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled Waiting 12 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! pass4 at ahc0 bus 0 target 6 lun 0 pass4: <DELL 1x4 SCSI BP 5.47> Fixed Processor SCSI-2 device pass4: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) da1 at ahc0 bus 0 target 1 lun 0 da1: <QUANTUM ATLAS V 9 SCA 0201> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) da2 at ahc0 bus 0 target 2 lun 0 da2: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device da2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C) da3 at ahc0 bus 0 target 3 lun 0 da3: <QUANTUM ATLAS_V_36_SCA 0230> Fixed Direct Access SCSI-3 device da3: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da3: 35020MB (71722776 512 byte sectors: 255H 63S/T 4464C) Mounting root from ufs:/dev/da0s2a cd0 at ahc1 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:466 1.06> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004201c18a7a$707280c0$0a00a8c0>