Date: Wed, 11 Mar 1998 13:21:47 -0500 From: Josh Tiefenbach <josh@zipperup.org> To: scsi@FreeBSD.ORG Cc: gibbs@narnia.plutotech.com Subject: Re: CAM Testimonials Message-ID: <19980311132147.52937@sun.zipperup.org>
index | next in thread | raw e-mail
I havent been able to get the latest CAM snap to work on my machine.
Specs:
-current kernel ca 3/10/98, userland bits from ~ 1/27/98.
Asus SC200 (53c810 based card)
Micropolis Stinger 4gig HD (MICROP 4743 S150)
SCSI CD-ROM (MATSHITA CD-ROM CR-506 8S05)
The symptoms:
Kernel boots up to the point where the CAM code would start scanning the bus.
At this point, I get the following messages:
Mar 10 23:12:00 asherah /kernel: ncr0: SCSI phase error fixup: CCB already
dequeued (0xf085ac00)
Mar 10 23:12:00 asherah /kernel: ncr0: timeout nccb=f085a800 (skip)
Mar 10 23:12:00 asherah /kernel: ncr0: timeout nccb=f085c800 (skip)
Followed by a lot more ncr timeouts. I've left it for ~5 minutes, with no
change.
Interestingly enough, when I boot with a `normal' kernel I get:
sd0 at scbus0 target 0 lun 0
sd0: Direct-Access
sd0: 10.0 MB/s (100 ns, offset 8)
sd0: M_DISCONNECT received, but datapointer not saved:
data=1e1b4 save=3226b0 goal=3226d4.
I also get the odd
Mar 10 13:24:24 asherah /kernel: ncr0: timeout ccb=f07c3400 (skip)
>From time to time with the old code.
I'm currently away from the machine right now, but if you want me to try any
diagnostics, I can do it when I get home.
josh
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980311132147.52937>