Date: Tue, 25 Jul 2000 18:27:33 -0700 From: "Joseph Stein" <joes@teleport.com> To: "Milan Salajka" <milan@salajka.cz> Cc: <freebsd-questions@freebsd.org> Subject: Re: Problems booting stable/4.1-RC. Message-ID: <015201bff6a0$ad7528c0$0100a8c0@wstein.com> References: <029e01bff660$58349e80$0100a8c0@wstein.com> <008601bff662$c4012320$0101a8c0@metropole.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
I've moved this back to FreeBSD-Questions. Please see the first post by me for background. > well, > > try to compile kernel with commented these lines: > > # ATA and ATAPI devices > #device ata0 at isa? port IO_WD1 irq 14 > #device ata1 at isa? port IO_WD2 irq 15 > > which are uncommented in the GENERIC kernel file... I gave that a try, and still have the same problem... Here is the kernel configuration of the kernel I am trying to build. At the bottom is a copy of the dmesg output from the most recent succesful boot with this kernel... # # SHASTA -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/SHASTA,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $ machine i386 cpu I686_CPU ident SHASTA maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options QUOTA options IPDIVERT options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFILTER # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See LINT for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # # Allow ncr to attach legacy NCR devices when # # both sym and ncr are configured # #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? # ## SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # ## RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash pseudo-device snp # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # ## PCI Ethernet NICs that use the common MII bus controller code. device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ## ISA Ethernet NICs. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex #device ep ## WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really ## exists only as a PCMCIA device, so there is no ISA attatement needed ## and resources will always be dynamically assigned by the pccard code. #device wi ## Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will ## work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP ## mode (the factory default). If you set the switches on your ISA ## card for a manually chosen I/O address and IRQ, you must specify ## those paremeters here. #device an ## Xircom Ethernet #device xe ## The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device fe0 at isa? port 0x300 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # ## Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= dmesg output follows =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= shasta# dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RC #0: Tue Jul 25 17:11:36 PDT 2000 root@shasta.wstein.com:/b/obj/usr/src/sys/SHASTA Calibrating clock(s) ... TSC clock: 598792760 Hz, i8254 clock: 1193093 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD-K7(tm) Processor (598.84-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x612 Stepping = 2 Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P AT,MMX> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative real memory = 134152192 (131008K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x0035a000 - 0x07fe7fff, 130605056 bytes (31886 pages) avail memory = 127176704 (124196K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fb180 bios32: Entry = 0xfb5f0 (c00fb5f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb620 pnpbios: Found PnP BIOS data at 0xc00fbfb0 pnpbios: Entry = f0000:bfe0 Rev = 1.0 Other BIOS signatures found: ACPI: 000f5fc0 Preloaded elf kernel "kernel" at 0xc0341000. Preloaded elf module "splash_bmp.ko" at 0xc03410a8. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 module_register_init: MOD_LOAD (splash_bmp, c033c7d4, 0) error 2 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022) pcib0: <AMD-751 host to PCI bridge> on motherboard found-> vendor=0x1022, dev=0x7006, revid=0x25 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 27 map[14]: type 1, range 32, base e0000000, size 12 found-> vendor=0x1022, dev=0x7007, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=1 secondarybus=1 found-> vendor=0x1022, dev=0x7408, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1022, dev=0x7409, revid=0x03 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x1022, dev=0x740b, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1022, dev=0x740c, revid=0x06 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=5 map[10]: type 1, range 32, base e0001000, size 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000e400, size 8 map[14]: type 1, range 32, base e0002000, size 8 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 32, base e0003000, size 8 pci0: <PCI bus> on pcib0 pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base d8000000, size 26 pci1: <PCI bus> on pcib1 pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 5.0 irq 12 isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=52 status1=50 ata0: devices = 0x3 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 status0=20 status1=30 ata1: mask=03 status0=20 status1=30 ata1: devices = 0x0 ata1: probe allocation failed chip1: <PCI to Other bridge (vendor=1022 device=740b)> at device 7.3 on pci0 ohci0: <AMD-756 USB Controller> mem 0xe0001000-0xe0001fff irq 5 at device 7.4 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AMD-756 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe0002000-0xe00020ff irq 10 at device 10.0 on pci0 rl0: Ethernet address: 00:50:ba:85:e0:58 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached rl1: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xe0003000-0xe00030ff irq 11 at device 12.0 on pci0 rl1: Ethernet address: 00:50:ba:8b:22:65 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl1 attached Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: RESET_AUX return code:ffffffff kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x11 0x11 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x9 0x9 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03a67f3f 0..934=935 cylinders, 0..127=128 heads, 1..63=63 sectors 1:020bfe3f 0..523=524 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 684060, tty 63009a, net 670c9a bpf: sl0 attached IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to accept, logging disabled IP Filter: v3.4.8 initialized. Default = pass all, Logging = disabled ata0-master: success setting up WDMA2 mode on AMD chip ad0: <QUANTUM FIREBALL_TM3840A/A6B.2400> ATA-0 disk at ata0 as master ad0: 3681MB (7539840 sectors), 7480 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: success setting up UDMA4 mode on AMD chip ad1: <QUANTUM FIREBALL CR4.3A/A5U.1200> ATA-4 disk at ata0 as slave ad1: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA66 ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad1 Creating DISK wd1 Mounting root from ufs:/dev/ad0s1a ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting up WDMA2 mode on AMD chip ata0-slave: success setting up UDMA4 mode on AMD chip done ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting up WDMA2 mode on AMD chip ata0-slave: success setting up UDMA4 mode on AMD chip done ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=52 status1=50 ata0-master: success setting up WDMA2 mode on AMD chip ata0-slave: success setting up UDMA4 mode on AMD chip done ad0: READ command timeout - resetting ata0-master: WARNING: WAIT_READY active=ATA_ACTIVE_ATA ata0-master: success setting up PIO4 mode on generic chip ad0: trying fallback to PIO mode ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting up PIO4 mode on generic chip ata0-slave: success setting up UDMA4 mode on AMD chip done ad0s1: type 0xa5, start 0, end = 7539839, size 7539840 ad0s1: C/H/S end 469/84/63 (2516849) != end 7539839: invalid start_init: trying /sbin/init Linux-ELF exec handler installed shasta# To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?015201bff6a0$ad7528c0$0100a8c0>