Date: Sun, 8 Aug 1999 22:27:08 +0200 From: Cejka Rudolf <cejkar@dcse.fee.vutbr.cz> To: freebsd-current@freebsd.org Subject: VESA module doesn't work with ATI Mach64 RagePro Message-ID: <19990808222708.A21161@dcse.fee.vutbr.cz>
next in thread | raw e-mail | index | archive | help
I have switched graphics card from S3Virge to ATI Mach64 RagePro rev 92
with 8 MB RAM a I have noticed that VESA module doesn't work with this
graphics card on my -current box - I can't use VESA_XXX console modes now.
Command kldstat says there is loaded module vesa.ko. No errors are
reported when I'm trying to unload/load vesa.ko module. Kernel reports
during boot:
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc024f622 (1000022)
VESA: ATI MACH64
Command "vidcontrol -i mode" reports lines below. It looks VESA module
can't read mode table properly. But simple VESA utilities in DOS are capable
to determine all VESA modes supported by ATI Mach64 card with VESA 2.0 BIOS.
Is this known problem? Or should I invetigate this problem further?
mode# flags type size font window linear buffer
------------------------------------------------------------------------------
0 (0x000) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k
1 (0x001) 0x00000001 T 40x25 8x8 0xb8000 32k 32k 0x00000000 32k
2 (0x002) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k
3 (0x003) 0x00000001 T 80x25 8x8 0xb8000 32k 32k 0x00000000 32k
4 (0x004) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k
5 (0x005) 0x00000003 G 320x200x2 1 8x8 0xb8000 32k 32k 0x00000000 32k
6 (0x006) 0x00000003 G 640x200x1 1 8x8 0xb8000 32k 32k 0x00000000 32k
13 (0x00d) 0x00000003 G 320x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k
14 (0x00e) 0x00000003 G 640x200x4 4 8x8 0xa0000 64k 64k 0x00000000 256k
16 (0x010) 0x00000003 G 640x350x2 2 8x14 0xa0000 64k 64k 0x00000000 128k
18 (0x012) 0x00000003 G 640x350x4 4 8x14 0xa0000 64k 64k 0x00000000 256k
19 (0x013) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k
20 (0x014) 0x00000001 T 40x25 8x14 0xb8000 32k 32k 0x00000000 32k
21 (0x015) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k
22 (0x016) 0x00000001 T 80x25 8x14 0xb8000 32k 32k 0x00000000 32k
23 (0x017) 0x00000001 T 40x25 8x16 0xb8000 32k 32k 0x00000000 32k
24 (0x018) 0x00000001 T 80x25 8x16 0xb8000 32k 32k 0x00000000 32k
26 (0x01a) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k
27 (0x01b) 0x00000003 G 640x480x4 4 8x16 0xa0000 64k 64k 0x00000000 256k
28 (0x01c) 0x00000003 G 320x200x8 1 8x8 0xa0000 64k 64k 0x00000000 64k
30 (0x01e) 0x00000001 T 80x50 8x8 0xb8000 32k 32k 0x00000000 32k
32 (0x020) 0x00000001 T 80x30 8x16 0xb8000 32k 32k 0x00000000 32k
34 (0x022) 0x00000001 T 80x60 8x8 0xb8000 32k 32k 0x00000000 32k
37 (0x025) 0x00000003 G 320x240x8 1 8x8 0xa0000 64k 64k 0x00000000 64k
40 (0x028) 0x00000001 T 90x25 8x16 0xb8000 32k 32k 0x00000000 32k
42 (0x02a) 0x00000001 T 90x30 8x16 0xb8000 32k 32k 0x00000000 32k
44 (0x02c) 0x00000001 T 90x43 8x8 0xb8000 32k 32k 0x00000000 32k
45 (0x02d) 0x00000000 T 90x43 8x8 0xb8000 32k 32k 0x00000000 32k
46 (0x02e) 0x00000001 T 90x50 8x8 0xb8000 32k 32k 0x00000000 32k
48 (0x030) 0x00000001 T 90x60 8x8 0xb8000 32k 32k 0x00000000 32k
112 (0x070) 0x00000000 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k
113 (0x071) 0x00000001 T 80x43 8x8 0xb8000 32k 32k 0x00000000 32k
--
Rudolf Cejka (cejkar@dcse.fee.vutbr.cz; http://www.fee.vutbr.cz/~cejkar)
Brno University of Technology, Faculty of El. Engineering and Comp. Science
Bozetechova 2, 612 66 Brno, Czech Republic
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990808222708.A21161>