Date: Sat, 11 Jan 2003 10:11:18 +0300 From: Odhiambo Washington <wash@wananchi.com> To: Nate Lawson <nate@root.org> Cc: Trent Nelson <trent@limekiln.vcisp.net>, freebsd-current@FreeBSD.ORG Subject: Re: System freeze running -current Message-ID: <20030111071118.GA18752@ns2.wananchi.com> In-Reply-To: <Pine.BSF.4.21.0301091032090.21229-100000@root.org> References: <20030104175525.GA9667@limekiln.vcisp.net> <Pine.BSF.4.21.0301091032090.21229-100000@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--huq684BweRXVnRxX
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
* Nate Lawson <nate@root.org> [20030109 21:34]: wrote:
> On Sat, 4 Jan 2003, Trent Nelson wrote:
> > On Fri, Jan 03, 2003 at 11:16:57AM -0800, Nate Lawson wrote:
> > > Sounds like an atkbd or syscons problem.
> > > Did you suspend the laptop and resume before this happens?
> >
> > No. However, it happened to me today shorty after I issued a sysctl
> > -w hw.acpi.cpu.economy_speed=8. (Why does it default to 4 anyway?)
>
> Try Taku-san's patch. I'm unfamiliar with this section of acpi so I can't
> help here.
>
> > > How does "unset acpi_load" at the boot prompt change things?
> >
> > Well, I can't reproduce it consistently, so it'll be hard to determ-
> > ine if disabling ACPI does the trick.
> >
> > I also noticed I was able to drop into the debugger and the keyboard
> > works fine in it. Can you suggest what I should be looking for?
>
> I don't know. I was just trying to get you to post more information so
> others could help also. I'd suspect an interrupt problem if it works in
> ddb but not at the console. Can you supply dmesg for boot with acpi as
> well as after "unset acpi_load"? I'm curious about the atkbd probe line
> in particular.
>
Hello All,
Mr. Nate's suspicion seems almost accurate to me. I've seen there seem to
be IRQ issues. Here attached are dmesg outputs when I boot with acpi and
without acpi.
I'd be glad to know about any solution found.
-Wash
--
Odhiambo Washington <wash@wananchi.com> "The box said 'Requires
Wananchi Online Ltd. www.wananchi.com Windows 95, NT, or better,'
Tel: +254 2 313985-9 +254 2 313922 so I installed FreeBSD."
GSM: +254 72 743223 +254 733 744121 This sig is McQ! :-)
Wethern's Law:
Assumption is the mother of all screw-ups.
--huq684BweRXVnRxX
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg-with-acpi
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Fri Jan 10 15:01:30 EAT 2003
wash@beastie.wananchi.com:/usr/obj/usr/src/sys/Kern5.x
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05fb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05fb0a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1699957108 Hz
CPU: Pentium 4 (1699.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 335478784 (319 MB)
avail memory = 318447616 (303 MB)
Initializing GEOMetry subsystem
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc0501222 (1000022)
VESA: ATI RAGE128
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIAP4X AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 6 entries at 0xc00fdec0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
unknown: I/O range not supported
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 11 at device 9.0 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xdf101000-0xdf10107f irq 5 at device 11.0 on pci0
xl0: Ethernet address: 00:50:da:39:d8:2f
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd81f mem 0xdf000000-0xdf0fffff,0xdf100000-0xdf100fff irq 10 at device 12.0 on pci0
fxp0: Ethernet address 00:08:c7:fb:05:c2
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcm1: <VIA VT8233> port 0xec00-0xecff irq 10 at device 17.5 on pci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
BRIDGE 020214 loaded
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA100
ad2: 9771MB <Maxtor 2B010H1> [19854/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s2a
--huq684BweRXVnRxX
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg-without-acpi
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Fri Jan 10 15:01:30 EAT 2003
wash@beastie.wananchi.com:/usr/obj/usr/src/sys/Kern5.x
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05a5000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1699957516 Hz
CPU: Pentium 4 (1699.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 335478784 (319 MB)
avail memory = 318816256 (304 MB)
Initializing GEOMetry subsystem
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc0501222 (1000022)
VESA: ATI RAGE128
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 6 entries at 0xc00fdec0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 11 at device 9.0 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xdf101000-0xdf10107f irq 5 at device 11.0 on pci0
xl0: Ethernet address: 00:50:da:39:d8:2f
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd81f mem 0xdf000000-0xdf0fffff,0xdf100000-0xdf100fff irq 10 at device 12.0 on pci0
fxp0: Ethernet address 00:08:c7:fb:05:c2
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 5 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 5 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 5 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcm1: <VIA VT8233> port 0xec00-0xecff irq 10 at device 17.5 on pci0
orm0: <Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
BRIDGE 020214 loaded
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA100
ad2: 9771MB <Maxtor 2B010H1> [19854/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s2a
--huq684BweRXVnRxX--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030111071118.GA18752>