Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 27 May 2004 19:50:52 -0700
From:      "Jacob S. Barrett" <jbarrett@amduat.net>
To:        freebsd-current@freebsd.org
Subject:   Inspiron 8000 and acpiconf -s3
Message-ID:  <200405271950.52903.jbarrett@amduat.net>

next in thread | raw e-mail | index | archive | help
I have been experiencing serious problems with suspend mode 3 in FreeBSD 5.2 
(current as of 5/24) on my Inspiron 8000 with BIOS A23.  When I suspend mode 
3 the screen goes blank then turns solid white.  After the screen turns white 
the numlock, capslock and scrolllock on the keyboard and the HD activity 
light go solid.  At this point the machine stops responding to any input and 
remains in this state forever (couple of hours anyway).  If I then press the 
power button the screen and lights return to normal and the previous console 
text on the screen is visible.  This lasts for about 2 seconds, then the 
screen goes blank and the system reboots.

Anyone seen this before?  Is there a module I am missing or that is 
conflicting?  I have searched through Google for similar problems with the 
Inspiron, but came up with only references to it actually working.  I must be 
doing something wrong then.  Here is dmesg output to give you an idea of what 
I have loaded.  Is there any other log or dump that would be helpful.

Thanks in advance for any help.

dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #8: Mon May 24 23:05:22 PDT 2004
    root@osiris.amduat.net:/usr/obj/usr/src/sys/OSIRIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08f0000.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08f01cc.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08f0278.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08f0324.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc08f03d0.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc08f0478.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc08f0524.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08f05d8.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc08f0684.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08f072c.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc08f07d8.
Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc08f0884.
Preloaded elf module "/boot/kernel/ulpt.ko" at 0xc08f0930.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc08f09dc.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc08f0a84.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc08f0b30.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc08f0bd8.
Preloaded elf module "/boot/kernel/random.ko" at 0xc08f0c80.
Preloaded elf module "/boot/kernel/speaker.ko" at 0xc08f0d2c.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc08f0dd8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08f0e88.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc08f0f34.
Preloaded elf module "/boot/kernel/fdc.ko" at 0xc08f0fdc.
Preloaded elf module "/boot/kernel/smbios.ko" at 0xc08f1084.
Preloaded elf module "/boot/kernel/intpm.ko" at 0xc08f1130.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08f11dc.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc08f1284.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08f1330.
Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08f13dc.
Preloaded elf module "/boot/kernel/ppbus.ko" at 0xc08f1488.
Preloaded elf module "/boot/kernel/lpt.ko" at 0xc08f1534.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08f15dc.
link_elf: symbol ppb_request_bus undefined
KLD file lpt.ko - could not finalize loading
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (848.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536780800 (511 MB)
avail memory = 515526656 (491 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 10
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe4000000-0xe7ffffff 
at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 3 INTA is routed to irq 5
pcib2: slot 6 INTA is routed to irq 10
pcib2: slot 6 INTA is routed to irq 10
pcib2: slot 15 INTA is routed to irq 10
pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem 0xf8ffe000-0xf8ffffff 
irq 5 at device 3.0 on pci2
pcm0: failed: rid 0x10 is ioport, requested 3
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem 
0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 10 at device 6.0 on pci2
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:01:03:87:0b:fd
xl0: [GIANT-LOCKED]
pci2: <simple comms> at device 6.1 (no driver attached)
cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 15 INTA is routed to irq 10
cbb1: <TI4451 PCI-CardBus Bridge> at device 15.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: slot 15 INTA is routed to irq 10
fwohci0: <Texas Instruments PCI4451> mem 
0xf8ff8000-0xf8ffbfff,0xf8ffc800-0xf8ffcfff irq 10 at device 15.2 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 47:4f:c0:00:38:20:c4:01
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 
0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xdce0-0xdcff irq 
10 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
speaker0 port 0x67,0x65,0x63,0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_video0: <ACPI video extension> on acpi0
smbios0: <System Management BIOS> at iomem 0xf6ed0-0xf6eee on motherboard
smbios0: Version: 2.03
pmtimer0 on isa0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 848145010 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA100
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2502> at ata0-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 
(3.2.x mvm) $
vmmon: Module vmmon: initialized
vmnet1: Ethernet address: 00:bd:f4:13:00:01
xl0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
drm0: <ATI Rage 128 Mobility MF (AGP)> port 0xcc00-0xccff mem 
0xfcffc000-0xfcffffff,0xe8000000-0xebffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe4000000 64MB
info: [drm] Initialized r128 2.5.0 20030725 on minor 0
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
fwohci0: fwohci_pci_suspend
fwohci0: fwohci_pci_resume: power_state = 0x00000000
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: Initiate bus reset
wakeup from sleeping state (slept 02:00:28)
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ums0: Logitech Inc. iFeel Mouse, rev 1.00/1.01, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0xe000-0xe03f irq 10 function 
0 config 1 on pccard1
wi0: [GIANT-LOCKED]
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.72.1)
wi0: Ethernet address: 00:02:2d:08:63:7a
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: detached
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0xe000-0xe03f irq 10 function 
0 config 1 on pccard1

-- 
Jacob S. Barrett
jbarrett@amduat.net
www.amduat.net

"I don't suffer from insanity, I enjoy every minute of it."



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200405271950.52903.jbarrett>