Date: Sat, 13 Feb 1999 17:25:52 -0800 (PST) From: Thomas Dean <tomdean@ix.netcom.com> To: freebsd-current@FreeBSD.ORG Subject: lpt0 Not Found Message-ID: <199902140125.RAA00376@ix.netcom.com>
next in thread | raw e-mail | index | archive | help
I changed to the new nlpt. No luck.
It appears that the parallel port is not found.
I am running SMP-current, as of this afternoon. From uname -a:
... FreeBSD 4.0-CURRENT #0: Sat Feb 13 16:11:56 PST 1999
In my config, I changed to include ppbus0, nlpt0, and ppc0, exactly as
in LINT:
<snip>
# Parallel-Port Bus
# nlpt Parallel Printer
controller ppbus0
# device lpt0 at isa? port? tty irq 7 vector lptintr
controller ppc0 at isa? disable port ? tty irq 7
device nlpt0 at ppbus?
<snip>
tomdean
== dmesg ==========================
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sat Feb 13 16:11:56 PST 1999
tomdean@celebris:/usr/src/sys/compile/CELEBRIS-SMP
Timecounter "i8254" frequency 1193025 Hz
CPU: Pentium/P54C (586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 100663296 (98304K bytes)
avail memory = 95055872 (92828K bytes)
Programming 16 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xf02b0000.
Probing for devices on PCI bus 0:
chip0: <Intel 82434NX (Neptune) PCI cache memory controller> rev 0x11 on pci0.0.0
ncr0: <ncr 53c810 fast10 scsi> rev 0x02 int a irq 11 on pci0.1.0
chip1: <Intel 82378IB PCI to ISA bridge> rev 0x88 on pci0.2.0
vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 9 on pci0.6.0
de0: <Digital 21041 Ethernet> rev 0x11 int a irq 10 on pci0.8.0
de0: DEC DE450-CA 21041 [10Mb/s] pass 1.1
de0: address 00:00:f8:02:76:db
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
fd0: 1.44MB 3.5in
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
stray irq 7
Intel Pentium detected, installing workaround for F00F bug
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
de0 XXX: driver didn't set ifq_maxlen
lo0 XXX: driver didn't set ifq_maxlen
Waiting 5 seconds for SCSI devices to settle
(probe3:ncr0:0:3:0): COMMAND FAILED (6 ff) @0xf09dc000.
(probe2:ncr0:0:2:0): COMMAND FAILED (6 ff) @0xf09dc600.
(probe1:ncr0:0:1:0): COMMAND FAILED (6 ff) @0xf09dcc00.
(probe0:ncr0:0:0:0): COMMAND FAILED (6 ff) @0xf09ba200.
SMP: AP CPU #1 Launched!
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL1080S 1Q09> Fixed Direct Access SCSI-2 device
da0: 10.0MB/s transfers (10.0MHz, offset 8)
da0: 1042MB (2134305 512 byte sectors: 255H 63S/T 132C)
da2 at ncr0 bus 0 target 2 lun 0
da2: <QUANTUM EMPIRE_1080S 1240> Fixed Direct Access SCSI-2 device
da2: 10.0MB/s transfers (10.0MHz, offset 8), Tagged Queueing Enabled
da2: 1029MB (2109376 512 byte sectors: 255H 63S/T 131C)
da1 at ncr0 bus 0 target 1 lun 0
da1: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device
da1: 10.0MB/s transfers (10.0MHz, offset 8), Tagged Queueing Enabled
da1: 3090MB (6328861 512 byte sectors: 255H 63S/T 393C)
changing root device to da1s1a
cd0 at ncr0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-5401TA 3605> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da1:ncr0:0:1:0): tagged openings now 8
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902140125.RAA00376>