Date: Thu, 6 Dec 2007 20:23:59 +0100 From: "Hansa" <mythtv@logic-q.nl> To: <freebsd-multimedia@freebsd.org> Subject: Device not configured Message-ID: <MKEKIEMCICOPMNPAOBMEAEMLCHAA.mythtv@logic-q.nl>
next in thread | raw e-mail | index | archive | help
Trying to setup my pvr-500 and come this far.
# pvr250-setchannel 2160.00
ioctl( tfd, BT848_GAUDIO ) failed.: Device not configured
ioctl( tfd, TVTUNER_SETFREQ ) failed.: Device not configured
Can someone tell me whats the next thing to do?
# pciconf -l -v
cxm0@pci2:8:0: class=0x040000 card=0xe8070070 chip=0x00164444 rev=0x01
hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
device = 'iTVC16/CX23416 MPEG Codec'
class = multimedia
subclass = video
cxm1@pci2:9:0: class=0x040000 card=0xe8170070 chip=0x00164444 rev=0x01
hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
device = 'iTVC16/CX23416 MPEG Codec'
class = multimedia
subclass = video
# dmesg
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xdc000000-0xdfffffff irq 16 at
device 8.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
second(radio) tuner 101
tuner code 91
tuner_type = 3
cxm0: Philips FQ1216ME MK3 tuner
<2>cxm 0-0000: loaded /lib/modules/v4l-cx25840.fw firmware (14264 bytes)
<2>cxm debug 0-0000: decoder set input (0)
<2>cxm debug 0-0000: now setting Tuner input
<2>cxm debug 0-0000: set audio input (0)
<2>cxm debug 0-0000: set audio input (0)
cxm0: Eeprom PAL
<2>tda 0-0000: switching to v4l2
<2>tda 0-0000: configure for: PAL-BG
<2>tda 0-0000: writing: b=0xd4 c=0x70 e=0x09
<2>tda 0-0000: read: 0xce
<2>tda 0-0000: after power on : no
<2>tda 0-0000: afc : -187.5 kHz [min]
<2>tda 0-0000: fmif level : low
<2>tda 0-0000: afc window : in
<2>tda 0-0000: vfi level : high
<2>cxm 0-0000: Video signal: not present
<2>cxm 0-0000: Detected format: NTSC-M
<2>cxm 0-0000: Detected audio mode: forced mode
<2>cxm 0-0000: Detected audio standard: forced audio standard
<2>cxm 0-0000: Audio muted: no
<2>cxm 0-0000: Audio microcontroller: running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode: undefined
<2>cxm 0-0000: Specified standard: PAL-BDGHI
<2>cxm 0-0000: Specified input: Tuner
<2>cxm 0-0000: Specified audio input: Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode: stereo
<2>cxm 0-0000: Selected 65 MHz format: system DK
<2>cxm 0-0000: Selected 45 MHz format: chroma
cxm0: [GIANT-LOCKED]
cxm0: encoder firmware version 0x2050032
cxm1: <Conexant iTVC16 MPEG Coder> mem 0xd8000000-0xdbffffff irq 17 at
device 9.0 on pci2
cxm_iic1: <Conexant iTVC15 / iTVC16 I2C controller> on cxm1
iicbb1: <I2C bit-banging driver> on cxm_iic1
iicbus1: <Philips I2C bus> on iicbb1 master-only
second(radio) tuner 101
tuner code 91
tuner_type = 3
cxm1: Philips FQ1216ME MK3 tuner
<2>cxm 0-0000: loaded /lib/modules/v4l-cx25840.fw firmware (14264 bytes)
<2>cxm debug 0-0000: decoder set input (0)
<2>cxm debug 0-0000: now setting Tuner input
<2>cxm debug 0-0000: set audio input (0)
<2>cxm debug 0-0000: set audio input (0)
cxm1: Eeprom PAL
<2>tda 0-0000: switching to v4l2
<2>tda 0-0000: configure for: PAL-BG
<2>tda 0-0000: writing: b=0xd4 c=0x70 e=0x09
<2>tda 0-0000: read: 0x4e
<2>tda 0-0000: after power on : no
<2>tda 0-0000: afc : -187.5 kHz [min]
<2>tda 0-0000: fmif level : low
<2>tda 0-0000: afc window : in
<2>tda 0-0000: vfi level : low
<2>cxm 0-0000: Video signal: not present
<2>cxm 0-0000: Detected format: NTSC-M
<2>cxm 0-0000: Detected audio mode: forced mode
<2>cxm 0-0000: Detected audio standard: forced audio standard
<2>cxm 0-0000: Audio muted: no
<2>cxm 0-0000: Audio microcontroller: running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode: undefined
<2>cxm 0-0000: Specified standard: PAL-BDGHI
<2>cxm 0-0000: Specified input: Tuner
<2>cxm 0-0000: Specified audio input: Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode: stereo
<2>cxm 0-0000: Selected 65 MHz format: system DK
<2>cxm 0-0000: Selected 45 MHz format: chroma
cxm1: [GIANT-LOCKED]
cxm1: encoder firmware version 0x2050032
device cxm0 opened
device cxm0 opened
device cxm0 opened
device cxm0 opened
<2>cxm 0-0000: Video signal: present
<2>cxm 0-0000: Detected format: PAL-BDGHI
<2>cxm 0-0000: Detected audio mode: forced mode
<2>cxm 0-0000: Detected audio standard: forced audio standard
<2>cxm 0-0000: Audio muted: no
<2>cxm 0-0000: Audio microcontroller: running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode: undefined
<2>cxm 0-0000: Specified standard: PAL-BDGHI
<2>cxm 0-0000: Specified input: Tuner
<2>cxm 0-0000: Specified audio input: Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode: stereo
<2>cxm 0-0000: Selected 65 MHz format: system DK
<2>cxm 0-0000: Selected 45 MHz format: chroma
device cxm0 opened
<2>cxm 0-0000: Video signal: present
<2>cxm 0-0000: Detected format: PAL-BDGHI
<2>cxm 0-0000: Detected audio mode: forced mode
<2>cxm 0-0000: Detected audio standard: forced audio standard
<2>cxm 0-0000: Audio muted: no
<2>cxm 0-0000: Audio microcontroller: running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode: undefined
<2>cxm 0-0000: Specified standard: PAL-BDGHI
<2>cxm 0-0000: Specified input: Tuner
<2>cxm 0-0000: Specified audio input: Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode: stereo
<2>cxm 0-0000: Selected 65 MHz format: system DK
<2>cxm 0-0000: Selected 45 MHz format: chroma
device cxm0 opened
device cxm0 opened
Best regards,
Hansa
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MKEKIEMCICOPMNPAOBMEAEMLCHAA.mythtv>