Date: Fri, 22 Apr 2005 21:46:37 +0200 From: Martin Mersberger <gremlin@portal-to-web.de> To: Eric Anderson <anderson@centtech.com>, freebsd-mobile@freebsd.org Subject: Re: Dell 610 - Xorg not working?! on i386/5.4-RC3 Message-ID: <20050422194637.GA22051@portal-to-web.de> In-Reply-To: <42690E4E.2000900@centtech.com> References: <20050422141704.GE17892@portal-to-web.de> <42690E4E.2000900@centtech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Apr 22, 2005 at 09:46:38AM -0500, Eric Anderson wrote:
Hi Eric,
> >I've just got a Dell 610 with a intel 915GM graphic inside. I tried the
> >hints, I found
> >at X.org using the i810 drivers, but the graphic is not recognised using
> >the GENERIC kernel
> >(not yet tried another kernel )
> >
> >The thing I wounder about is, that I also get no /dev/agpgart ( and afaik,
> >the i810 family
> >need the agpgart... ), but agp(4) is in GENERIC. my dmesg also shows no
> >agpX device...
> >
> >is there no 915 support in the agp driver at the moment?
>
> Just for a datapoint, my D610 has a Radeon X300 in it, and it works fine.
That's a good point - I've just checked at Dell - there are 2 series avail
a cheaper version with Intel graphic and a bit expensiver variant with the X300
My Dell has the intel graphic..
just to complete the infos - a dmesg, scanpci and xorg.conf of my not working
combination
Cheers
Martin
# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #0: Sun Apr 17 09:23:46 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 528289792 (503 MB)
avail memory = 507281408 (483 MB)
ACPI APIC Table: <DELL CPi R >
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:43:4b:52:15
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib2
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci3: <simple comms> at device 1.5 (no driver attached)
pci3: <network> at device 3.0 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0xec40-0xec7f,0xed00-0xedff mem 0xdfebfd00-0xdfebfdff,0xdfebfe00-0xdfebffff irq 16 at device 30.2 on pci0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 17 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
speaker0: <PC speaker> port 0x67,0x65,0x63,0x61 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xc0000-0xce7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596009446 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 28615MB <FUJITSU MHT2030AT/009B> [58140/16/63] at ata0-master UDMA33
acd0: DVDROM <HL-DT-STDVD-ROM GDR8082N/0106> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
Probing for PCI devices (Bus:Device:Function)
# X -scanpci
(0:0:0) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2590) from Intel Corp.
(0:2:0) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2592) from Intel Corp.
(0:2:1) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2792) from Intel Corp.
(0:28:0) unknown chip (DeviceId 0x2660) from Intel Corp.
(0:29:0) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2658) from Intel Corp.
(0:29:1) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2659) from Intel Corp.
(0:29:2) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x265a) from Intel Corp.
(0:29:3) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x265b) from Intel Corp.
(0:29:7) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x265c) from Intel Corp.
(0:30:0) Intel Corp. 82801BAM/CAM PCI Bridge
(0:30:2) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x266e) from Intel Corp.
(0:30:3) unknown card (0x14f1/0x5423) using an unknown chip (DeviceId 0x266d) from Intel Corp.
(0:31:0) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2641) from Intel Corp.
(0:31:2) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x2653) from Intel Corp.
(0:31:3) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x266a) from Intel Corp.
(2:0:0) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x1677) from Broadcom Corporation
(3:1:0) unknown card (0xfffc/0xffff) using an unknown chip (DeviceId 0x8036) from Texas Instruments
(3:1:5) unknown card (0x1028/0x0182) using an unknown chip (DeviceId 0x8038) from Texas Instruments
(3:3:0) unknown card (0x1028/0x0003) using a Broadcom Corporation BCM94306 802.11g
# cat xorg.conf
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Emulate3Buttons"
EndSection
Section "Monitor"
Identifier "My Monitor"
HorizSync 30-64 # multisync
VertRefresh 50-100
EndSection
Section "Device"
Identifier "Intel i915GM"
Driver "i810"
VideoRam 131072
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Intel i915GM"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Sample Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050422194637.GA22051>