Date: Sun, 19 Apr 2026 13:55:54 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: christos@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #28333 - Still Failing Message-ID: <798734547.1535.1776606955060@jenkins.ci.freebsd.org> In-Reply-To: <1980767117.1523.1776599541905@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #28333 (554f5aa526266057672740e22af0a75cc32bddd5) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28333/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28333/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/28333/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 554f5aa526266057672740e22af0a75cc32bddd5 by christos: service(8): Replace indentation in usage() The end of the build log: [...truncated 4.17 MiB...] epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.444s] sys/netinet/output:output_raw_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:98:da epair1b: Ethernet address: 58:9c:fc:10:0c:c7 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [0.906s] sys/netinet/output:output_raw_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.208s] sys/netinet/output:output_tcp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:98:da epair1b: Ethernet address: 58:9c:fc:10:0c:c7 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [3.440s] sys/netinet/output:output_tcp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.328s] sys/netinet/output:output_udp_flowid_mpath_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 58:9c:fc:10:98:da epair1b: Ethernet address: 58:9c:fc:10:0c:c7 epair1a: link state changed to UP epair1b: link state changed to UP lo1: link state changed to UP lo2: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN passed [8.804s] sys/netinet/output:output_udp_setup_success -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [1.400s] sys/netinet/raw:input -> lo0: link state changed to UP passed [0.070s] sys/netinet/raw:reconnect -> lo0: link state changed to UP passed [0.059s] sys/netinet/redirect:valid_redirect -> epair0a: Ethernet address: 58:9c:fc:10:a8:c5 epair0b: Ethernet address: 58:9c:fc:10:60:7b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [2.217s] sys/netinet/so_reuseport_lb_test:basic_ipv4 -> Limiting tcp reset response from 7920 to 201 packets/sec Limiting tcp reset response from 8048 to 205 packets/sec passed [2.041s] sys/netinet/so_reuseport_lb_test:basic_ipv6 -> Limiting tcp reset response from 7110 to 201 packets/sec Limiting tcp reset response from 7207 to 200 packets/sec passed [2.266s] sys/netinet/so_reuseport_lb_test:bind_without_listen -> passed [0.009s] sys/netinet/so_reuseport_lb_test:concurrent_add -> passed [2.600s] sys/netinet/so_reuseport_lb_test:connect_bound -> passed [0.007s] sys/netinet/so_reuseport_lb_test:connect_not_bound -> passed [0.006s] sys/netinet/so_reuseport_lb_test:connect_udp -> passed [0.208s] sys/netinet/so_reuseport_lb_test:connect_udp6 -> Limiting ICMPv6 destination unreachable output from 100 to 98 packets/sec passed [0.210s] sys/netinet/so_reuseport_lb_test:double_listen_ipv4 -> passed [0.006s] sys/netinet/so_reuseport_lb_test:double_listen_ipv6 -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet_bind_connected_port -> passed [0.010s] sys/netinet/socket_afinet:socket_afinet_bind_ok -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet_bind_zero -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet_bindany -> passed [0.007s] sys/netinet/socket_afinet:socket_afinet_multibind -> passed [0.187s] sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup -> passed [0.007s] sys/netinet/socket_afinet:socket_afinet_poll_rdhup -> passed [0.006s] sys/netinet/socket_afinet:socket_afinet_stream_reconnect -> passed [0.006s] sys/netinet/tcp_connect_port_test:basic_ipv4 -> Limiting tcp reset response from 2263 to 197 packets/sec Limiting tcp reset response from 9163 to 204 packets/sec Limiting tcp reset response from 9187 to 209 packets/sec Limiting tcp reset response from 9205 to 201 packets/sec Limiting tcp reset response from 9446 to 201 packets/sec Limiting tcp reset response from 9243 to 186 packets/sec Limiting tcp reset response from 9158 to 200 packets/sec Limiting tcp reset response from 9240 to 200 packets/sec passed [7.052s] sys/netinet/tcp_connect_port_test:basic_ipv6 -> Limiting tcp reset response from 7736 to 198 packets/sec Limiting tcp reset response from 7875 to 211 packets/sec Limiting tcp reset response from 7974 to 190 packets/sec Limiting tcp reset response from 7887 to 190 packets/sec Limiting tcp reset response from 7914 to 212 packets/sec Limiting tcp reset response from 7960 to 195 packets/sec Limiting tcp reset response from 7864 to 198 packets/sec Limiting tcp reset response from 7895 to 209 packets/sec passed [8.271s] TCP HPTS started 2 ((unbounded)) swi interrupt threads sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_concurrent_operations -> passed [0.526s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_cpu_assignment -> passed [0.517s] sys/netinet/tcp_hpts_test.py:TestTcpHpts::test_deferred_requests -> Kernel page fault with the following non-sleepable locks held: exclusive rw test-inp (test-inp) r = 0 (0xfffff800034c9830) locked @ /usr/src/sys/netinet/tcp_hpts.c:1275 Kernel page fault with 1 sleep inhibitors stack backtrace: #0 0xffffffff80c54c1c at witness_debugger+0x6c #1 0xffffffff80c56529 at witness_warn+0x4c9 #2 0xffffffff8113ccdc at trap_pfault+0x8c #3 0xffffffff8110c328 at calltrap+0x8 #4 0xffffffff8315f866 at __ktest_deferred_requests+0x996 #5 0xffffffff830e3abd at run_test+0x2ad #6 0xffffffff80e6deac at nl_receive_message+0x11c #7 0xffffffff80e6d7f5 at nl_taskqueue_handler+0x3e5 #8 0xffffffff80c468f2 at taskqueue_run_locked+0x1c2 #9 0xffffffff80c477e3 at taskqueue_thread_loop+0xd3 #10 0xffffffff80b899d2 at fork_exit+0x82 #11 0xffffffff8110d34e at fork_trampoline+0xe Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0xc8 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff8316a3f1 stack pointer = 0:0xfffffe00a223cab0 frame pointer = 0:0xfffffe00a223cbd0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (netlink_socket (PID) rdi: fffff801d83b8500 rsi: 0000000000000001 rdx: ffffffff82269618 rcx: 0000000000000001 r8: ffffffff81ad2ae0 r9: 0000000000000001 rax: 0000000000000000 rbx: 0000000000002000 rbp: fffffe00a223cbd0 r10: 0000000000000000 r11: 0000000000000001 r12: fffff800034c9800 r13: 0000000000000000 r14: fffff800034c9848 r15: 0000000000001388 trap number = 12 panic: page fault cpuid = 0 time = 1776606943 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00a223c7e0 vpanic() at vpanic+0x136/frame 0xfffffe00a223c910 panic() at panic+0x43/frame 0xfffffe00a223c970 trap_pfault() at trap_pfault+0x422/frame 0xfffffe00a223c9e0 calltrap() at calltrap+0x8/frame 0xfffffe00a223c9e0 --- trap 0xc, rip = 0xffffffff8316a3f1, rsp = 0xfffffe00a223cab0, rbp = 0xfffffe00a223cbd0 --- tcp_hptsi() at tcp_hptsi+0x6f1/frame 0xfffffe00a223cbd0 __ktest_deferred_requests() at __ktest_deferred_requests+0x996/frame 0xfffffe00a223cc60 run_test() at run_test+0x2ad/frame 0xfffffe00a223cd00 nl_receive_message() at nl_receive_message+0x11c/frame 0xfffffe00a223cd40 nl_taskqueue_handler() at nl_taskqueue_handler+0x3e5/frame 0xfffffe00a223ce40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe00a223cec0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe00a223cef0 fork_exit() at fork_exit+0x82/frame 0xfffffe00a223cf30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00a223cf30 --- trap 0x6f61f240, rip = 0x1dda6f620350, rsp = 0x1, rbp = 0 --- KDB: enter: panic [ thread pid 0 tid 107451 ] Stopped at kdb_enter+0x33: movq $0,0x15dd302(%rip) db:0:kdb.enter.panic> show pcpu cpuid = 0 dynamic pcpu = 0xdadcc0 curthread = 0xfffff8007c076000: pid 0 tid 107451 critnest 1 "netlink_socket (PID" curpcb = 0xfffff8007c076550 fpcurthread = none idlethread = 0xfffff8010240c780: tid 100003 "idle: cpu0" self = 0xffffffff82a10000 curpmap = 0xffffffff81da2d20 tssp = 0xffffffff82a10384 rsp0 = 0xfffffe00a223d000 kcr3 = 0x8000000002946002 ucr3 = 0xffffffffffffffff scr3 = 0x1e99ddf7e gs32p = 0xffffffff82a10404 ldt = 0xffffffff82a10444 tss = 0xffffffff82a10434 curvnet = 0xfffff800030e7ec0 spin locks held: db:0:kdb.enter.panic> reset Uptime: 52m22s + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-28333' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./run.sh x ./run-kyua.sh x ./auto-shutdown x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins1413801047704071521.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '554f5aa526266057672740e22af0a75cc32bddd5', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../554f5aa526266057672740e22af0a75cc32bddd5/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?798734547.1535.1776606955060>