Date: Wed, 02 Aug 2000 16:35:45 +0300 From: <nmnenkov@dir.bg> To: freebsd-questions@freebsd.org Subject: How to enable Multi-link with ppp - IP problem Message-ID: <web-1232864@dir.bg>
next in thread | raw e-mail | index | archive | help
Hello
I want to make multilink connection under FreeBSD, but I have some
problems with that. My ISP supports multilink. I try to connect with
ppp. My config line are:
mp:
set socket 10000 bollocks
set log local Phase LCP IPCP CCP
set openmode active 5
set speed 115200
set phone 0134200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \
OK-AT-OK ATX3 OK \\dATDP\\T TIMEOUT 60 CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0
add default HISADDR
set timeout 120
set authname XXXXXX
set authkey XXXXXX
set mrru 1500
clone link0, link1
link deflink remove
link link0 set device /dev/cuaa0
link link0 set mode ddial
link link0 set login
link link1 set device /dev/cuaa1
link link1 set mode ddial
link link1 set login
And I receive this:
Ppp ON pbc-svishtov> Phase: Pap Input: SUCCESS ()
Phase: mp: Listening on /var/run/ppp--00-
Phase: First link: link0
CCP: FSM: Using "mp" as a transport
CCP: mp: State change Initial --> Closed
CCP: mp: LayerStart.
CCP: mp: SendConfigReq(1) state = Closed
CCP: DEFLATE[4] win 15
CCP: PRED1[2]
CCP: mp: State change Closed --> Req-Sent
CCP: FSM: Using "link0" as a transport
CCP: link0: State change Initial --> Closed
CCP: link0: State change Closed --> Stopped
Phase: link0: lcp -> open
Phase: bundle: Network
IPCP: FSM: Using "mp" as a transport
IPCP: mp: State change Initial --> Closed
IPCP: mp: LayerStart.
IPCP: mp: SendConfigReq(1) state = Closed
IPCP: IPADDR[6] 0.0.0.0
IPCP: COMPPROTO[6] 16 VJ slots with slot compression
IPCP: mp: State change Closed --> Req-Sent
PPp ON pbc-svishtov> CCP: mp: SendConfigReq(1) state = Req-Sent
CCP: DEFLATE[4] win 15
CCP: PRED1[2]
IPCP: mp: SendConfigReq(1) state = Req-Sent
IPCP: IPADDR[6] 0.0.0.0
IPCP: COMPPROTO[6] 16 VJ slots with slot compression
Phase: link0: Carrier lost
CCP: link0: State change Stopped --> Closed
CCP: link0: State change Closed --> Initial
LCP: link0: LayerDown
As far as I understand I have problem with receiving my remote IP.
Can anyone tell what more I must put in config lines?
Thanks for the attention.
-----------------------------
Free mail from www.dir.bg!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?web-1232864>