Date: Tue, 06 Feb 2001 10:43:13 -0800 From: Cy Schubert - ITSD Open Systems Group <Cy.Schubert@uumail.gov.bc.ca> To: ken@FreeBSD.org Cc: Cy.Schubert@uumail.gov.bc.ca, freebsd-bugs@FreeBSD.org Subject: Re: kern/24740: filesystem corruption CFP1080 CAM SCSI cam_xpt.c Message-ID: <200102061843.f16IhMY07511@cwsys.cwsent.com> In-Reply-To: Your message of "Mon, 05 Feb 2001 16:47:30 PST." <200102060047.f160lU516022@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
AHA 2940U/UW Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #8: Tue Jan 23 13:50:12 PST 2001 root@cwsys:/usr/opt/cvs-420r/src/sys/compile/CWSYS Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 119752821 Hz CPU: Pentium/P54C (119.75-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 83886080 (81920K bytes) avail memory = 78356480 (76520K bytes) Preloaded elf kernel "kernel" at 0xc0337000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371SB (PIIX3) USB controller> at 7.2 irq 9 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x6000-0x607f mem 0xe4001000-0xe400107f irq 5 at device 18.0 on pci0 xl0: Ethernet address: 00:50:da:80:28:96 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6100-0x61ff mem 0xe4000000-0xe4000fff irq 5 at device 19.0 on pci0 aic7880: Wide Channel A, SCSI Id=7, 16/255 SCBs pci0: <S3 Trio graphics accelerator> at 20.0 irq 12 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fd1: <1200-KB 5.25" drive> on fdc0 drive 1 aha0 at port 0x330-0x333 irq 11 drq 5 on isa0 aha0: AHA-1542CF FW Rev. C.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 CCBs atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: Ethernet address 00:60:97:d3:32:3e IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging DUMMYNET initialized (000608) IP Filter: v3.4.16 initialized. Default = block all, Logging = enabled ad0: 2014MB <WDC AC22100H> [4092/16/63] at ata0-master WDMA2 ad2: 2441MB <WDC AC22500L> [4960/16/63] at ata1-master WDMA2 Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 4 lun 0 sa0: <ARCHIVE Python 28388-XXX 5.45> Removable Sequential Access SCSI-2 device sa0: 7.812MB/s transfers (7.812MHz, offset 15) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST34520N 1487> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C) da0 at ahc0 bus 0 target 0 lun 0 da0: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1030MB (2110812 512 byte sectors: 64H 32S/T 1030C) Mounting root from ufs:/dev/ad0s1a cd0 at ahc0 bus 0 target 2 lun 0 cd0: <PLEXTOR CD-ROM PX-4XCH 1.22> Removable CD-ROM SCSI-2 device cd0: 4.032MB/s transfers (4.032MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da2 at aha0 bus 0 target 6 lun 0 da2: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present Regards, Phone: (250)387-8437 Cy Schubert Fax: (250)387-5766 Team Leader, Sun/Alpha Team Internet: Cy.Schubert@osg.gov.bc.ca Open Systems Group, ITSD, ISTA Province of BC In message <200102060047.f160lU516022@freefall.freebsd.org>, ken@FreeBSD.org wr ites: > Synopsis: filesystem corruption CFP1080 CAM SCSI cam_xpt.c > > State-Changed-From-To: open->feedback > State-Changed-By: ken > State-Changed-When: Mon Feb 5 16:45:47 PST 2001 > State-Changed-Why: > Submitter never responded to my questions: > > What sort of controller are you using? > > What I'm getting at here is that I want to make sure the corruption > problem is due to the drive and not the controller or HBA driver. > > Also, can you supply dmesg output for the drive and controller? > > > http://www.freebsd.org/cgi/query-pr.cgi?pr=24740 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102061843.f16IhMY07511>