Date: Fri, 25 Mar 2005 18:23:46 +0100 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" <bsdalpha@fadesa.es> To: freebsd-alpha@freebsd.org Subject: 5.4b1 on Miata Message-ID: <42444922.794080FB@fadesa.es>
next in thread | raw e-mail | index | archive | help
Hello, It was impossible to me to do work a miata workstation with 5.3, now I'm testing 5.4 and the machine stops while trying to load the Qlogic driver. I wonder if 5.4 will support this alpha. Thanks you. (boot dka0.0.0.107.0 -file kernel -flags a) block 0 of dka0.0.0.107.0 is a valid boot block reading 410 blocks from dka0.0.0.107.0 bootstrap code read in base = 1e6000, image_start = 0, image_bytes = 33400 initializing HWRPB at 2000 initializing page table at 1d8000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x1000000010114 OSF PAL rev: 0x1000000020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 1.2 (root@ds10.samsco.home, Fri Mar 18 17:32:00 UTC 2005) Memory: 196608 k Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x5e5110+0x3d710 syms=[0x8+0x665a0+0x8+0x54b63] - Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. OK boot -v Entering /boot/kernel/kernel at 0xfffffc0000345b60... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-BETA1 #0: Sat Mar 19 03:48:04 UTC 2005 root@ds10.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e18000. Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e180e0. Digital Personal Workstation (Miata) Digital Personal WorkStation 500au, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX> OSF PAL rev: 0x1000000020116 real memory = 199327744 (190 MB) Physical memory chunk(s): 0x00e38000 - 0x0bd09fff, 183312384 bytes (22377 pages) avail memory = 181174272 (172 MB) null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory> cia0: <2117x Core Logic chipset> cia0: Pyxis, pass 1 cia0: extended capabilities: 1<BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 4, range 32, base 00009000, size 7, enabled map[14]: type 1, range 32, base 81181000, size 7, enabled found-> vendor=0x1011, dev=0x0019, revid=0x30 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0047, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=0 found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000090a0, size 4, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=238 map[10]: type 4, range 32, base 00000170, size 3, enabled map[14]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 1, range 32, base 81170000, size 16, memory disabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=2 class=01-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=239 map[10]: type 1, range 32, base 81180000, size 12, enabled found-> vendor=0x1080, dev=0xc693, revid=0x00 bus=0, slot=7, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=234 map[10]: type 1, range 32, base 81140000, size 17, enabled map[14]: type 1, range 32, base 80800000, size 23, enabled map[18]: type 1, range 32, base 80000000, size 23, enabled found-> vendor=0x104c, dev=0x3d07, revid=0x01 bus=0, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0xc0 (48000 ns), maxlat=0xc0 (48000 ns) intpin=a, irq=8 found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=20, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0a90, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x20 (8000 ns), maxlat=0x00 (0 ns) dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x81181000-0x8118107f irq 0 at device 3.0 on pci0 dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x9000 miibus0: <MII bus> on dc0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto dc0: bpf attached dc0: Ethernet address: 08:00:2b:86:85:93 dc0: if_start running deferred for Giant dc0: interrupting at CIA irq 0 dc0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Cypress 82C693 ATA controller> port 0x90a0-0x90af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 238 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x90a0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=01 ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata0: interrupting at ISA irq 14 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: interrupting at ISA irq 15 ata1: [MPSAFE] atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x81170000-0x8117ffff irq 239 at device 7.2 on pci0 atapci1: failed: rid 0x20 is memory, requested 4 atapci1: unable to map interrupt ata2: channel #0 on atapci1 device_attach: ata2 attach returned 6 ohci0: <OHCI (generic) USB controller> mem 0x81180000-0x81180fff irq 234 at device 7.3 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81180000 ohci0: (New OHCI DeviceId=0xc6931080) ohci0: interrupting at ISA irq 10 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <display, VGA> at device 12.0 (no driver attached) pcib1: <PCI-PCI bridge> at device 20.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 0 pcib1: I/O decode 0x8000-0x8fff pcib1: memory decode 0x81000000-0x810fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 00008000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x8000-0x80ff map[14]: type 1, range 32, base 81010000, size 12, enabled pcib1: device (null) requested decoded memory range 0x81010000-0x81010fff found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=1, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0057, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.9 isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x81010000-0x81010fff irq 3 at device 4.0 on pci1 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x81010000 isp0: using Memory space register mapping isp0: interrupting at CIA irq 3 isp0: [GIANT-LOCKED] isp0: Ultra Mode Capable isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0 isp0: Last F/W revision was 5.57.1 isp0: 243 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 halted CPU 0 halt code = 5 HALT instruction executed PC = 0 >>> >>>show config Firmware SRM Console: V7.1-2 ARC Console: 5.70 PALcode: VMS PALcode V1.20-16, OSF PALcode V1.22-18 SROM Version: v5.90 Processor DECchip (tm) 21164A-2 Pass ? 500 MHz 96 KBytes SCache 2 MB BCache PYXIS ASIC Pass 257 MEMORY Memory Size = 192Mb Bank Size/Sets Base Addr ------ ---------- --------- 0 64Mb 00000000 1 64Mb 04000000 2 64Mb 08000000 BCache Size = 2Mb Tested Memory = 192Mbytes PCI Bus Bus 00 Slot 03: Digital Semiconductor 21143 Network Controller ewa0.0.0.3.0 08-00-2B-86-85-93 Bus 00 Slot 07: Cypress PCI Peripheral Controller Bus 00 Slot 07: Function 1: PCI IDE dka0.0.0.107.0 Compaq CRD-8322B Bus 00 Slot 07: Function 2: PCI IDE Bus 00 Slot 07: PCI USB Bus 00 Slot 12: ELSA GLoria Synergy Bus 00 Slot 20: DECchip 21152 PCI to PCI Bridge Bus 01 Slot 04: ISP1040 Scsi Controller pkc0.7.0.1004.0 SCSI Bus ID 7 dkc0.0.0.1004.0 IBM DDRS-34560D dkc100.1.0.1004.0 IBM DDRS-34560D dkc1000.10.0.1004.0 IBM DDRS-34560D dkc600.6.0.1004.0 IBM DDRS-34560D mkc500.5.0.1004.0 TLZ10 ISA Slot Device Name Type Enabled BaseAddr IRQ DMA 0 0 MOUSE Embedded Yes 60 12 1 KBD Embedded Yes 60 1 2 COM1 Embedded Yes 3f8 4 3 COM2 Embedded Yes 2f8 3 4 LPT1 Embedded No 3bc 7 5 FLOPPY Embedded Yes 3f0 6 2 6 EIDE Embedded Yes 1f0 14 3f6 15 170 376 7 ES1888 Embedded Yes 220 5 1 5 8 USB Embedded Yes 10 -- -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/IT d- s+:+() a31 C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w--- O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++ G++ e- h+(++) !r !z ------END GEEK CODE BLOCK------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42444922.794080FB>