Date: Thu, 03 Jan 2002 01:27:05 -0700 From: "Charles Burns" <burnscharlesn@hotmail.com> To: questions@freebsd.org Subject: Re: PCI internial modems Message-ID: <F214lQ080Gxw8Zw5V6Q000136cb@hotmail.com>
next in thread | raw e-mail | index | archive | help
A friend of mine whom I introduced to FreeBSD (that has since gone with SuSE--Traitor!) had this very same problem with a U.S. Robotics Performance Pro. He got it working fine, and the thread is in this newsgroup. If it can't be found, I'm sure he wouldn't mind getting emailed asking for a few pointers. Might as well not go through the heck that he did all over again. peltkore@hot(nospam)mail.com >On Wed, Jan 02, 2002 at 04:40:23PM -0500, Joe & Fhe Barbish wrote: > > Having a lot of problems getting FBSD 4.4 to use internal pci modems. > > My modem is brand new with controller and dsp onboard (IE not a >winmodem.) > > > > I changed the sio2 and 3 with out disable in my kernel conf and compiled > > kernel > > this is what I found in my boot log with boot -v for verbose boot >messages > > > > found-> vendor=0x11c1, dev=0x0480, revid=0x00 > > class=07-03-03, hdrtype=0x00, mfdev=0 > > subordinatebus=0 secondarybus=0 > > intpin=a, irq=9 > > map[10]: type 1, range 32, base e3001000, size 8 > > map[14]: type 1, range 32, base 0000dc00, size 8 > > map[18]: type 1, range 32, base 0000e000, size 8 > > map[1c]: type 1, range 32, base 0000e400, size 3 > > > > pci0: <unknown card> (vendor=0x11c1, dev=0x0480) at 18.0 irq 9 > > This is my zoom 56K pci plus modem that has onboard controller and dsp > > > > sio0: irq maps: 0x41 0x51 0x41 0x41 > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > > sio0: type 16550A > > sio1: irq maps: 0x41 0x49 0x41 0x41 > > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > > sio1: type 16550A > > sio2: configured irq 5 not in bitmap of probed irqs 0 > > sio2: irq maps: 0x41 0x41 0x41 0x41 > > sio2: probe failed test(s): 0 1 2 4 6 7 9 > > sio2 failed to probe at port 0x3e8-0x3ef irq 5 on isa0 > > sio3: configured irq 9 not in bitmap of probed irqs 0 > > sio3: irq maps: 0x41 0x41 0x41 0x41 > > sio3: probe failed test(s): 0 1 2 4 6 7 9 > > sio3 failed to probe at port 0x2e8-0x2ef irq 9 on isa0 > > > > How can I get this unknown card reconized as com2 or com3 > > and tell FBSD it's caau2? > >if you do a pciconf -l and use the info that gives you on the card you >can add the details of the PCI modem to /usr/src/sys/isa/sio.c (I know >it says ISA, but that's where the sio code is kept on 4.x). > >eg my PCI modem gives this in pciconf -l: >sio2@pci0:10:0: class=0x078000 card=0x0000151f chip=0x0000151f rev=0x00 >hdr=0x00 > >and here's what I added to sio.c to get it working (in the pci_ids struct): > { 0x0000151f, "SmartLink 5634PCV SurfRider", 0x10 }, > >The third value is basically guesswork, 0x10 is normal, if that doesn't >work then try other numbers :) > >Best of luck (and remember to submit the changes if it works :) > >-- >Simon Dick simond@irrelevant.org >"Why do I get this urge to go bowling everytime I see Tux?" > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F214lQ080Gxw8Zw5V6Q000136cb>