Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 12 Jul 2005 09:57:52 +0300
From:      Danny Braniss <danny@cs.huji.ac.il>
To:        Luigi Rizzo <rizzo@icir.org>
Cc:        freebsd-net@freebsd.org, freebsd-stable@freebsd.org
Subject:   Re: tcp troughput weirdness 
Message-ID:  <E1DsEiG-0004x6-CJ@cs1.cs.huji.ac.il>
In-Reply-To: Message from Luigi Rizzo <rizzo@icir.org> of "Mon, 11 Jul 2005 23:42:16 PDT." <20050711234216.A11017@xorpc.icir.org> 

next in thread | previous in thread | raw e-mail | index | archive | help
> we need more data points -
> did you test tcp or udp ?
i used iperf:
	Client connecting to x-dev, TCP port 5001
	TCP window size: 65.0 KByte (WARNING: requested 64.0 KByte)

> who is sourcing data ?
all, I tried all combinations, and the numbers are very similar to the
ones i posted.

> are the bandwidth symmetric (i.e. A-> same as B -> A ?
yes, theys are all in the same floor, fisical distance is a few meters.
i also tried other similar boxes and the freebsd thoughput is very similar,
so i doubt it that switches or hardware is involved.

> cheers
> luigi

thanks,
	danny

> 
> On Tue, Jul 12, 2005 at 09:21:13AM +0300, Danny Braniss wrote:
> > while checking out the quality of a switch, I came about a very disturbing
> > dicovery: FreeBSD <-> Linux througput is MUCH better than FreeBSD <-> FreeBSD
> > 
> > Setup:
> > 	2 blades in the same bladeserver, A running FreeBSD 5.4, B running Linux
> > 	C is running FreeBSD 5.4
> > 	all are connected at 1gb.
> > 
> > 	A -+ (FreeBSD)
> > 	   |
> > 	B -+ (Linux)
> > 	   |
> > 	  [switch]
> > 	    |
> > 	    +---- [router] --- C (FreeBSD)
> > 	A & B are on the same Vlan.
> > 	
> > iperf results:
> > 		Interval       Transfer     Bandwidth
> > 
> > A <=> B		0.0-10.0 sec  1.09 GBytes   939 Mbits/sec
> > 
> > A <=> C		0.0-10.0 sec   515 MBytes   432 Mbits/sec
> > 
> > B <=> C		0.0-10.0 sec  1.07 GBytes   918 Mbits/sec
> > 
> > I've run the tests several times, and the numbers are very similar,
> > so BIG Question: is there anything that can be tunned on the FreeBSD to
> > better the throughput?
> > 
> > danny
> > 
> > 	
> > 
> > _______________________________________________
> > freebsd-net@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-net
> > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1DsEiG-0004x6-CJ>