Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 31 Oct 2007 09:00:39 -1000
From:      Clifton Royston <cliftonr@lava.net>
To:        Robert Marella <rmarella@gmail.com>
Cc:        "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org>
Subject:   Re: Memory issues (was 7.0-BETA1 freeze using portmaster)
Message-ID:  <20071031190038.GA16704@lava.net>
In-Reply-To: <20071031085044.06cab487@asus64>
References:  <20071029093611.1ec829bc@p4> <alpine.BSF.0.9999.0710292253490.40215@qbhto.arg> <20071030072253.6e3ea6b0@p4> <alpine.BSF.0.9999.0710301114280.43895@qbhto.arg> <20071030150103.358629d5@asus64> <4727D5CD.7040900@FreeBSD.org> <20071031085044.06cab487@asus64>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 31, 2007 at 08:50:44AM -1000, Robert Marella wrote:
> > Robert Marella wrote:
> > 
> > > It is looking like a hardware problem. I update portmaster to 1.24
> > > and it didn't help. When I tried with the -B option it froze in a
> > > different place. I then csup the latest source rm'd /usr/obj and
> > > attempted a buildworld.
> > > 
> > > Lo and behold it froze up. It has been very hot the last few days
> > > here in Kona but all the fans seem to pulling good air. I am now
> > > running memtest and will let you know what I find.
> > 
> 
> This is for the archives and to see if any hardware guru out there has
> some helpful knowledge.
> 
> This computer has a ASUS P4P800 mobo with 2Gig of ram (4x500M). Memtest
> failed within minutes. I then ran each memory module one at a time and
> each ran without failures no matter which socket it was in.
> 
> Further tests showed that memory tests failed only when I had 2 or 4
> modules configured as dual channel *. The system is now running flawless
> with 3 modules (1.5G) installed which forces single channel operation.
> Again, the 3 modules can be in any sockets.

  I could be wrong but IIRC, some MBs of that era require very specific
DIMM timing parameters and/or require "registered" (buffered) DIMMs
when populating all slots for dual-channel operation.  Usually they are
more tolerant when running only a single bank or not running in
dual-channel.  If you can find the manual, you might want to check that
possibility.

  -- Clifton

-- 
    Clifton Royston  --  cliftonr@iandicomputing.com / cliftonr@lava.net
       President  - I and I Computing * http://www.iandicomputing.com/
 Custom programming, network design, systems and network consulting services



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071031190038.GA16704>