Date: Sun, 07 Mar 2004 20:48:22 +0200 From: Evren Yurtesen <yurtesen@ispro.net.tr> To: Putinas Piliponis <putinas.piliponis@icnspot.net> Cc: current@freebsd.org Subject: Re: serial ata on freebsd 5.2.1 or current Message-ID: <404B6E76.500@ispro.net.tr> In-Reply-To: <019e01c40468$7ee6c7a0$0464a8c0@spotripoli.local> References: <00b501c40413$416d2c20$1e64a8c0@spotripoli.local> <404ADE08.5040500@ispro.net.tr> <019e01c40468$7ee6c7a0$0464a8c0@spotripoli.local>
next in thread | previous in thread | raw e-mail | index | archive | help
I use two drives, I am sure there are i/o requests on both drives. I use squid cache with diskd and hyperthreading is enabled. No errors whatsoever. I use ICH5 on the board only. Not the ViA, but ViA was working fine though, just changed motherboard because the previous one supported only 3 memory slots. Putinas Piliponis wrote: > Do you use one disk drive or two ? What about more I/O on both disks > same time? > > ----- Original Message ----- From: "Evren Yurtesen" <yurtesen@ispro.net.tr> > To: "Putinas Piliponis" <putinas.piliponis@icnspot.net> > Cc: <current@freebsd.org> > Sent: Sunday, March 07, 2004 10:32 > Subject: Re: serial ata on freebsd 5.2.1 or current > > >> Putinas Piliponis wrote: >> >>> Hi all, >>> Is there any serial ata controller which works stable with 5.2.1 or >>> Current ? >>> I had tried SiI3112A and Intel ICH5 both knocks system to panic or >>> lockup. >>> ( ICH5 I tried only on 5.2.1-RELEASE , 3112 from yesterday current >>> and release as well ) >> >> >> >> ICH5 works fine. I also used one integrated ViA. >> >> If ICH5 is crashing, you should maybe check from the bios SATA >> settings. I got it working by disabling the 'enchanced mode' off for >> ich5. >> >> Evren >> >> >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?404B6E76.500>