Date: Wed, 2 Feb 2000 10:23:46 -0500 (EST) From: Richard J Kuhns <rjk@grauel.com> To: freebsd-mobile@freebsd.org Subject: FreeBSD 3.4 and Linksys ethernet card Message-ID: <14488.19458.180836.204176@localhost.grauel.com>
next in thread | raw e-mail | index | archive | help
Hello.
I'm having some fairly major problems with 3.4 on my laptop, and I'd really
appreciate it if anyone could offer some suggestions.
I was running 3.3-PAO until yesterday, but I had hopes that I'd be able to
use `straight' -stable and so installed 3.4.
As far as I can tell, everything is fine EXCEPT with my Linksys Combo
PCMCIA EthernetCard (model EC2T).
I performed the upgrade from 3.3-PAO by removing /usr/src, installing the
sources fresh from the 3.4 CD, and doing a `make buildworld; make
installworld'. I then built a new kernel (I based my kernel config file on
the new GENERIC and LINT) and ran mergemaster. Everything looks fine, but
when I insert the Linksys card I get the message "driver allocation failed
for Linksys" on the console.
I noticed that pccard.conf.sample (which I copied to pccard.conf) said to
remove irq 5 from the list of available irqs if I have a builtin sound
card. I do, so I did, but it made no difference.
Following are extracts from my config file and dmesg output; any additional
info will be supplied on request. Thanks for any help.
Kernel config file:
===
controller pnp0
...
device apm0 at isa?
controller card0
device pcic0 at card?
device pcic1 at card?
options PCIC_RESUME_RESET
...
device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
===
dmesg:
===
FreeBSD 3.4-RELEASE #0: Tue Feb 1 19:46:32 EST 2000
rjk@molap.grauel.com:/usr/src/sys/compile/MOLAP
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (297.79-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x187f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,<b18>,MMX,FXSR>
real memory = 67043328 (65472K bytes)
avail memory = 62390272 (60928K bytes)
Preloaded elf kernel "kernel" at 0xc029b000.
Preloaded elf module "linux.ko" at 0xc029b09c.
Pentium Pro MTRR support enabled
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
chip4: <PCI to CardBus bridge (vendor=104c device=ac1f)> rev 0x00 int a irq 255 on pci0.12.0
chip5: <PCI to CardBus bridge (vendor=104c device=ac1f)> rev 0x00 int a irq 255 on pci0.12.1
Probing for devices on PCI bus 1:
vga0: <ATI model 4c42 graphics accelerator> rev 0xdc int a irq 9 on pci1.0.0
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
pcm0 not found
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK6409MAV>
wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1802B/1119>, removable, accel, dma, iordis
acd0: drive speed 4134KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
pcic: controller irq 5
Initializing PC-card drivers: sio ed
changing root device to wd0s1a
--
Richard Kuhns rjk@grauel.com
PO Box 6249 Tel: (765)477-6000 \
100 Sawmill Road x319
Lafayette, IN 47903 (800)489-4891 /
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14488.19458.180836.204176>