Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 20 Jul 2000 09:10:21 +0200 (CEST)
From:      Jimmy Olgeni <olgeni@uli.it>
To:        freebsd-stable@freebsd.org
Subject:   vinum and shutdown cache sync
Message-ID:  <Pine.BSF.4.21.0007200842370.430-100000@olgeni.localdomain.net>

next in thread | raw e-mail | index | archive | help


Hello all,

I have a vinum stripe (ad1 and da1, on 4.1-RC). If I run the "halt"
command the system stops the "bufdaemon" and "syncer" processes, then
I get an error message like

(da1:ahc0:0:0:0) SYNCHRONIZE CACHE CDB 35 0 0 0 0 0 0 0 0 0
(da1:ahc0:0:0:0) ERROR CODE 96

The SCSI hard disk led then stays ON, and the kernel waits for a key to
reboot, as usual. At the next reboot the vinum drive come up clean and
works. This does not happen in an IDE only setup.

If I do a "mount /mnt/stripe", "vinum stop" before "halt" I don't get
this message.

Any ideas?

Jimmy

---

vinum setup:

Drive vinumdrive0:	Device /dev/ad1e
		Created on olgeni.localdomain.net at Tue Jul 18 19:55:28 2000
		Config last updated Thu Jul 20 08:40:39 2000
		Size:       3243631104 bytes (3093 MB)
volume vinum0 state up
plex name vinum0.p0 state up org striped 1024s vol vinum0 
sd name vinum0.p0.s0 drive vinumdrive0 plex vinum0.p0 state up len 4690944s driveoffset 265s plexoffset 0s
sd name vinum0.p0.s1 drive vinumdrive1 plex vinum0.p0 state up len 4690944s driveoffset 265s plexoffset 1024s

Drive /dev/ad1e: 3093 MB (3243631104 bytes)
Drive vinumdrive1:	Device /dev/da1e
		Created on olgeni.localdomain.net at Tue Jul 18 19:55:28 2000
		Config last updated Thu Jul 20 08:40:39 2000
		Size:       2402271232 bytes (2290 MB)
volume vinum0 state up
plex name vinum0.p0 state up org striped 1024s vol vinum0 
sd name vinum0.p0.s0 drive vinumdrive0 plex vinum0.p0 state up len 4690944s driveoffset 265s plexoffset 0s
sd name vinum0.p0.s1 drive vinumdrive1 plex vinum0.p0 state up len 4690944s driveoffset 265s plexoffset 1024s

Drive /dev/da1e: 2290 MB (2402271232 bytes)






To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0007200842370.430-100000>