Date: Mon, 30 Aug 2004 06:40:44 +0200 From: Oliver Lehmann <oliver@FreeBSD.org> To: freebsd-alpha@freebsd.org Subject: 5.3-BETA2 works for me Message-ID: <20040830064044.5f3932cf.oliver@FreeBSD.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi, not much to say: I've own a PC164LX-600 and FreeBSD-5.3-BETA2 works for me. dmesg attached. Wilko... you might add me to your list. -- Oliver Lehmann http://www.pofo.de/ http://wishlist.ans-netz.de/ [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #0: Mon Aug 30 04:10:04 CEST 2004 olivleh1@dill.salatschuessel.net:/usr/obj/alpha-5.3/usr/src/sys/DILL EB164 Digital AlphaPC 164LX 599 MHz, 598MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> OSF PAL rev: 0x1000200020117 real memory = 803119104 (765 MB) avail memory = 779665408 (743 MB) cia0: <2117x Core Logic chipset> cia0: Pyxis, pass 1 cia0: extended capabilities: 1<BWEN> pcib0: <2117x PCI host bus adapter> on cia0 pci0: <PCI bus> on pcib0 sym0: <895> port 0x10000-0x100ff mem 0x82030000-0x82030fff,0x82031000-0x820310ff irq 2 at device 5.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, SE, parity checking sym0: interrupting at CIA irq 2 sym0: [GIANT-LOCKED] xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x10100-0x1017f mem 0x82031100-0x8203117f irq 0 at device 6.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:02:b4:75:9e xl0: interrupting at CIA irq 0 xl0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 8.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <CMD 646 WDMA2 controller> port 0x10190-0x1019f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 11.0 on pci0 atapci0: interrupting at CIA irq 5 ata0: channel #0 on atapci0 ata0: interrupting at ISA irq 14 ata1: channel #1 on atapci0 ata1: interrupting at ISA irq 15 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: interrupting at ISA irq 1 atkbd0: [GIANT-LOCKED] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounter "alpha" frequency 599840145 Hz quality 0 Timecounters tick every 0.976 msec ATAPI_RESET time = 80us acd0: CDROM <Compaq CRD-8402B/1.01> at ata0-master PIO4 Waiting 2 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS mode change from SE to SE. pass1 at ata0 bus 0 target 0 lun 0 pass1: <COMPAQ CD-ROM CRD-8402B 1.01> Removable CD-ROM SCSI-0 device pass1: 16.000MB/s transfers da0 at sym0 bus 0 target 0 lun 0 da0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) Mounting root from ufs:/dev/da0a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040830064044.5f3932cf.oliver>