Date: Mon, 22 Feb 1999 14:00:04 -0500 From: Coranth Gryphon <gryphon@intech.net> To: Dan <dan@expresscopy.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Reboot Hangups with ahc driver Message-ID: <36D1A934.D72BE9F@intech.net> References: <Pine.BSF.4.05.9902211859270.3478-100000@admin.expresscopy.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> results. Every time I reboot, it hangs up after > waiting 15 secons for SCSI devices to settle, and ends up > dropping to the debugger with a message like: ahc_update_target.... > Going to the console and doing a panic will make it reboot and > come right back up. > > This machine is a PII-450 with an adaptec 7890 onboard controller. I had the same problem (with the 7890 onboard), except it froze after recognizing my SCSI devices. > Should I just upgrade to 3.1-STABLE and be done with it? I ran into this problem when doing the 3.1 Install (from floppy). After juggling a few things (mainly physical positions of the drives in the case -- no cable/config changes) it worked. I don't know what the problem was, though all failures were preceded with a "zf_read: fill error" before the freezes. Anyone know of any problems with the 7890 chipset? -coranth To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36D1A934.D72BE9F>