Date: Wed, 28 Jan 2009 18:50:33 GMT From: Mariusz Gromada <mariusz.gromada@wp.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/131087: ipw / iwi - no sent/received packets; iwi needs to be restarted; ipw / iwi causes kernel panic Message-ID: <200901281850.n0SIoXAL029912@www.freebsd.org> Resent-Message-ID: <200901281900.n0SJ0A3V031317@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 131087
>Category: kern
>Synopsis: ipw / iwi - no sent/received packets; iwi needs to be restarted; ipw / iwi causes kernel panic
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jan 28 19:00:10 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Mariusz Gromada
>Release: FreeBSD 7.1-STABLE
>Organization:
>Environment:
FreeBSD bumper.multifraktal.net 7.1-STABLE FreeBSD 7.1-STABLE #0: Tue Jan 27 18:50:42 CET 2009 bumper@bumper.multifraktal.net:/usr/obj/usr/src/sys/GENERIC i386
>Description:
I am running FreeBSD 7.1 STABLE on IBM T40 machine. I have Intel(R) PRO/Wireless 2100 MiniPCI card.
bumper:bumper:~# dmesg | grep ipw0
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xc0210000-0xc0210fff
irq 11 at device 2.0 on pci2
ipw0: Ethernet address: xx:xx:xx:xx:xx:xx
Connection was tested using WinXP with AR5005G card.
Problems description:
Problem no. 1
--------------------------------------------
Driver is loaded, ipw0 interface can be found, adhoc
connection established without encryption -> WinXP/AR5005G shows CRC
errors when receiving data from FreeBSD/ipw0, it means that I have
associated status in ifconfig ipw0, WinXP/AR5005G shows established
connection (very good level of radio signal), no packets can be sent
or received.
my /boot/loader.conf
if_ipw_load="YES"
wlan_load="YES"
firmware_load="YES"
legal.intel_ipw.license_ack=1
ipw_bss_load="YES"
ipw_ibss_load="YES"
ipw_monitor_load="YES"
Above problem can be solved by changing /boot/loader.conf as follows
if_iwi_load="YES"
wlan_load="YES"
firmware_load="YES"
legal.intel_iwi.license_ack=1
legal.intel_ipw.license_ack=1
iwi_bss_load="YES"
iwi_ibss_load="YES"
iwi_monitor_load="YES"
iwi driver loads correctly, dmesg shows the same ipw0 Intel(R)
PRO/Wireless 2100 MiniPCI card, now connection works properly.
Problem no. 2:
--------------------------------------------
ipw / iwi needs to be restarted to work properly
- FreeBSD/ipw0 is connected to WinXP/AR5005G (adhoc mode)
- I close the connection shutting down WinXP (or disabling AR5005G
radio interface), FreeBSD/ipw0 stays untouched
- I start again AR5005G on WinXP
- connection seems to be established (signal level is good), but no
packets can be sent or received
Workaround solution is to restart ipw0 interface
ifconfig ipw0 down
ifconfig ipw0 up -> connection works properly
Problem no. 3:
--------------------------------------------
Sometimes, after ifconfig ipw0 (up/down/inet/etc..)
command, kernel panics
Sample panic info
Architecture: i386
Architecture Version: 2
Dump Length: 56569856B (53 MB)
Blocksize: 512
Dumptime: Mon Jan 26 18:42:34 2009
Hostname: bumper.multifraktal.net
Magic: FreeBSD Kernel Dump
Version String: FreeBSD 7.1-RELEASE #0: Thu Jan 1 14:37:25 UTC 2009
root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Panic String: page fault
Dump Parity: 1189822569
Bounds: 5
Dump Status: good
I have been running IBM T40 (Intel(R) PRO/Wireless 2100 MiniPCI) for
three years with WinXP, everything was fine. I am almost sure this is
not a hardware issue.
--------------------------------------
dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-STABLE #0: Tue Jan 27 18:50:42 CET 2009
bumper@bumper.multifraktal.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1500MHz (1495.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1073086464 (1023 MB)
avail memory = 1036382208 (988 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length: 0 102C/0 [20070320]
acpi0: <IBM TP-1R> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [ITHREAD]
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at device 1.0 on pci2
em0: [FILTER]
em0: Ethernet address: xx:xx:xx:xx:xx:xx
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 2> on uhub1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1495156390 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
ad0: 57231MB <HTS726060M9AT00 MH4OA6AA> at ata0-master UDMA100
acd0: CDRW <UJDA755zDVD/CDRW/1.20> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xc0210000-0xc0210fff irq 11 at device 2.0 on pci2
ipw0: Ethernet address: xx:xx:xx:xx:xx:xx
ipw0: [ITHREAD]
>How-To-Repeat:
FreeBSD 7.1 STABLE, IBM T40 type 2373
>Fix:
Workaround
Problem no 1: use iwi instead of ipw driver
Problem no 2: restart ipw interface (down/up)
Problem no 3: unknown
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200901281850.n0SIoXAL029912>