Date: Tue, 21 Sep 2004 01:44:35 +0100 From: Joao Barros <joao.barros@gmail.com> To: freebsd-current@freebsd.org Subject: Asus A7N8X: Boot failure under Beta 4 and 5 Message-ID: <70e8236f0409201744c729ae0@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
------=_Part_321_32362758.1095727475553
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Trying to install FreeBSD on the last Winblows machine at home was a no go.
The kernel "pauses" at boot. I thought it stopped completely but after
pressing the power button I realized there was still something alive:
acpi: suspend request ignored (not ready yet)
Notes:
- boot fails under Beta4 and Beta5 with and without ACPI or safe mode.
- managed to boot 5.2 without ACPI
Anyone with this board booting properly?
------=_Part_321_32362758.1095727475553
Content-Type: text/plain; name="dmesg beta5.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="dmesg beta5.txt"
OK boot
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08/boot/kernel/acpi.ko text=3D0x3f99c -=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08data=3D0x1be4+0x110c |=08/=08-=08\=08|=08syms=
=3D[0x4+0x72a0/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08+=
0x4+0x9743|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08]
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08Copyright (=
c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA5 #0: Sun Sep 19 02:35:12 UTC 2004
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1600+ (1403.19-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x662 Stepping =3D 2
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xc0480000<MP,AMIE,DSP,3DNow!>
real memory =3D 536805376 (511 MB)
avail memory =3D 511553536 (487 MB)
mptable_probe: MP Config Table has bad signature:=20
=02
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd0000000-0xd7ffffff at device 0=
.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe6086000-0xe6086fff irq 22 at =
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe6081000-0xe6081fff irq 21 at =
device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ukbd0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/13.10, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
atapci0: <SiI 3112 SATA150 controller> port 0xa000-0xa00f,0x9c00-0x9c03,0x9=
800-0x9807,0x9400-0x9403,0x9000-0x9007 mem 0xe5000000-0xe50001ff irq 18 at =
device 11.0 on pci1
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f,0x376,0x170=
-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem =
0xe1000000-0xe100007f irq 21 at device 1.0 on pci2
miibus0: <MII bus> on xl0
acphy0: <AC101L 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:e0:18:f1:62:91
fwohci0: <1394 Open Host Controller Interface> mem 0xe6084000-0xe608403f,0x=
e6083000-0xe60837ff irq 22 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:0f:a6:db
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:0f:a6:db
fwe0: Ethernet address: 02:e0:18:0f:a6:db
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 0.0 (no driver attached)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xd7000-0xd77ff,0xd5000-0xd67ff,0xd0000-0x=
d47ff,0xcc000-0xcffff,0xc0000-0xcb7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1403192062 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09b68a4
ad0: 57278MB <SAMSUNG SV6004H/PY100-11> [116375/16/63] at ata0-master UDMA1=
00
ad1: 57278MB <SAMSUNG SV6004H/PY100-11> [116375/16/63] at ata0-slave UDMA10=
0
ATAPI_RESET time =3D 100us
ATAPI_RESET time =3D 40us
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-120/1.23> at ata1-master UDMA6=
6
acd1: DVDR <SONY DVD RW DRU-700A/VY05> at ata1-slave UDMA33
ad4: 152627MB <WDC WD1600JD-00HBB0/08.02D08> [310101/16/63] at ata2-master =
SATA150
acpi: suspend request ignored (not ready yet)
acpi: suspend request ignored (not ready yet)
acpi: suspend request ignored (not ready yet)
------=_Part_321_32362758.1095727475553--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?70e8236f0409201744c729ae0>