Date: Wed, 6 Dec 2000 12:16:41 GMT From: postmaster@freebie.demon.nl To: gallatin@freebsd.org Cc: freebsd-alpha@freebsd.org Subject: Lynx test / 2nd attempt Message-ID: <E143dV3-0003yH-00@post.mail.nl.demon.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Drew, all,
Please find attached the transcript of the boot of yesterdays
Lynx boot floppy. Unfortunately the system still hangs after
the probing PnP devices message. Isn't PnP on Alpha a no-no
anyway?
Please note there are 2 boot transcripts, without and with -v
respectively.
hth,
Wilko
[-- Attachment #2 --]
Script started on Tue Dec 5 14:40:32 2000
bash-2.04# tip a
connected
P00>>>sho conf
Digital Equipment Corporation
AlphaServer 2100A 4/200
SRM Console V5.3-10 VMS PALcode V5.56-7, OSF PALcode V1.45-12
Component Status Module ID
CPU 0 P B2020-AA DECchip (tm) 21064-3
Memory 0 P B2021-CA 128 MB
I/O B2222-AA
dva0.0.0.1000.0 RX26/RX23
Slot Option Hose 0, Bus 0, PCI
2 Intel 82375 Bridge to Bus 1, EISA
3 DECchip 21050-AA Bridge to Bus 2, PCI
7 DECchip 21040-AA ewa0.0.0.7.0 00-00-F8-23-16-31
9 QLogic ISP1020 pkb0.7.0.9.0 SCSI Bus ID 7
Slot Option Hose 0, Bus 1, EISA
1 Compaq Qvision
3 Mylex DAC960 dra.0.0.1003.0
dra0.0.0.1003.0 5 Member RAID 5
Slot Option Hose 0, Bus 2, PCI
1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7
dka600.6.0.2001.0 RRD43
6 Mylex DAC960 drb.0.0.2006.0
drb0.0.0.2006.0 2 Member RAID 1
drb1.0.0.2006.0 2 Member RAID 1
drb2.0.0.2006.0 2 Member RAID 1
P00>>>boot dva0
Halt Button is IN, BOOT NOT POSSIBLE
P00>>>P00>>>boot dva0[0K[15C
(boot dva0.0.0.1000.0 -flags 0,0)
block 0 of dva0.0.0.1000.0 is a valid boot block
reading 15 blocks from dva0.0.0.1000.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
VMS PAL rev: 0x4000700010538
OSF PAL rev: 0x4000c0002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.1
(rootk@quynh.nuxi.com, Mon Nov 27 05:39:53 GMT 2000)
Memory: 131072 k
Please insert MFS root floppy and press enter:
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel] in 9 seconds... Booting [/kernel] in 8 seconds... Booting [/kernel] in 7 seconds... Booting [/kernel]...
-\|/-\Entering kernel at 0xfffffc0000328200...
Unrecognized boot flag '0'.
Unrecognized boot flag ','.
Unrecognized boot flag '0'.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #18: Tue Dec 5 09:33:18 EST 2000
gallatin@thunder.cs.duke.edu:/.amd_mnt/muffin/export/ari_scratch2/gallatin/current/sys/compile/SABLE
DEC AlphaServer 2100A
AlphaServer 2100A 4/200, 190MHz
8192 byte page size, 1 processor.
CPU: EV4 (21064) major=2 minor=1
OSF PAL rev: 0x4000c0002012d
real memory = 132046848 (128952K bytes)
avail memory = 120602624 (117776K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00008fe000.
Preloaded mfs_root "/mfsroot" at 0xfffffc00008fe0c0.
md0: Preloaded image </mfsroot> 2949120 bytes at 0xfffffc000062b250
md1: Malloc disk
t20: using interrupt type 1 on pci bus 0
t20: <T2 Core Logic chipset>
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pcib1: <DEC 21050 PCI-PCI bridge> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
sym0: <810a> port 0x5000-0x50ff mem 0x81004000-0x810040ff irq 28 at device 1.0 on pci1
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
enabling irq 28, vector 0x9c0
read air = 0x40
read IC_mask = 0xffffffffffffffff
sym0: interrupting at T2 irq 28 (stdio irq 28)
mlx0: <Mylex version 2 RAID interface> port 0x5400-0x547f irq 48 at device 6.0 on pci1
enabling irq 48, vector 0xb00
read air = 0x40
read IC_mask = 0xffffffffefffffff
mlx0: interrupting at T2 irq 48 (stdio irq 48)
mlx0: DAC960P/PD, 3 channels, firmware 2.42-0-00, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 2007MB (4110336 sectors) RAID 1 (online)
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 2007MB (4110336 sectors) RAID 1 (online)
mlxd2: <Mylex System Drive> on mlx0
mlxd2: 2007MB (4110336 sectors) RAID 1 (online)
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81111000-0x8111107f irq 36 at device 7.0 on pci0
enabling irq 36, vector 0xa40
read air = 0x40
read IC_mask = 0xfffeffffefffffff
de0: interrupting at T2 irq 36 (stdio irq 36)
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:16:31
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x81110000-0x81110fff irq 44 at device 9.0 on pci0
enabling irq 44, vector 0xac0
read air = 0x40
read IC_mask = 0xfffeffefefffffff
isp0: interrupting at T2 irq 44 (stdio irq 44)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
enabling irq 7, vector 0x870
read air = 0x40
read IC_mask = 0xfffeefefefffffff
fdc0: interrupting at T2 irq 6 (stdio irq 7)
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
enabling irq 6, vector 0x860
read air = 0x40
read IC_mask = 0xfffeefefefffff7f
atkbd0: interrupting at T2 irq 1 (stdio irq 6)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
enabling irq 15, vector 0x8f0
read air = 0x40
read IC_mask = 0xfffeefefefffff3f
sio0: interrupting at T2 irq 4 (stdio irq 15)
sio1: reserved for low-level i/o
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
enabling irq 9, vector 0x890
read air = 0x40
read IC_mask = 0xfffeefefefff7f3f
ppc0: interrupting at T2 irq 7 (stdio irq 9)
halted CPU 0
halt code = 1
operator initiated halt
PC = fffffc00004f8944
P00>>>
P00>>>
P00>>>
P00>>>
P00>>>boot dva0 -fl v
resetting all I/O buses
Halt Button is IN, BOOT NOT POSSIBLE
P00>>>
P00>>>
P00>>>P00>>>boot dva0 -fl v[0K[21C
(boot dva0.0.0.1000.0 -flags v)
block 0 of dva0.0.0.1000.0 is a valid boot block
reading 15 blocks from dva0.0.0.1000.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 7ff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
VMS PAL rev: 0x4000700010538
OSF PAL rev: 0x4000c0002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.1
(rootk@quynh.nuxi.com, Mon Nov 27 05:39:53 GMT 2000)
Memory: 131072 k
Please insert MFS root floppy and press enter:
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel] in 9 seconds... Booting [/kernel]...
-\|/-\Entering kernel at 0xfffffc0000328200...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
Setting fdc 0 at to isa (string)
Setting fdc 0 port to 1008 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 drq to 2 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting vga 0 at to isa (string)
Setting sc 0 at to isa (string)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting sio 0 at to isa (string)
Setting sio 0 port to 1016 (int)
Setting sio 0 irq to 4 (int)
Setting sio 1 at to isa (string)
Setting sio 1 port to 760 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 flags to 80 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting atkbd 0 at to atkbdc (string)
Setting atkbd 0 irq to 1 (int)
Setting atkbdc 0 at to isa (string)
Setting atkbdc 0 port to 96 (int)
Setting fd 0 at to fdc0 (string)
Setting fd 0 drive to 0 (int)
Setting fdc 0 at to isa (string)
Setting fdc 0 drq to 2 (int)
Setting fdc 0 irq to 6 (int)
Setting fdc 0 port to 1008 (int)
Setting mcclock 0 at to isa (string)
Setting mcclock 0 port to 112 (int)
Setting ppc 0 at to isa (string)
Setting ppc 0 irq to 7 (int)
Setting psm 0 at to atkbdc (string)
Setting psm 0 irq to 12 (int)
Setting sc 0 at to isa (string)
Setting sio 0 at to isa (string)
Setting sio 0 irq to 4 (int)
Setting sio 0 port to 1016 (int)
Setting sio 1 at to isa (string)
Setting sio 1 flags to 80 (int)
Setting sio 1 irq to 3 (int)
Setting sio 1 port to 760 (int)
Setting vga 0 at to isa (string)
FreeBSD 5.0-CURRENT #18: Tue Dec 5 09:33:18 EST 2000
gallatin@thunder.cs.duke.edu:/.amd_mnt/muffin/export/ari_scratch2/gallatin/current/sys/compile/SABLE
DEC AlphaServer 2100A
AlphaServer 2100A 4/200, 190MHz
8192 byte page size, 1 processor.
CPU: EV4 (21064) major=2 minor=1
OSF PAL rev: 0x4000c0002012d
real memory = 132046848 (128952K bytes)
Physical memory chunk(s):
0x0091e000 - 0x07fe5fff, 124551168 bytes (15204 pages)
avail memory = 120602624 (117776K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00008fe000.
Preloaded mfs_root "/mfsroot" at 0xfffffc00008fe0c0.
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
md0: Preloaded image </mfsroot> 2949120 bytes at 0xfffffc000062b250
Creating DISK md0
Creating DISK md1
md1: Malloc disk
t20: using interrupt type 1 on pci bus 0
t20: <T2 Core Logic chipset>
pci0: physical bus=0
found-> vendor=0x8086, dev=0x0482, revid=0x15
bus=0, slot=2, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1011, dev=0x0001, revid=0x02
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x1011, dev=0x0002, revid=0x24
bus=0, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=36
map[10]: type 4, range 32, base 00010100, size 7, enabled
map[14]: type 1, range 32, base 81111000, size 7, enabled
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=44
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 81110000, size 12, enabled
pci0: <PCI bus> on pcib0
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pcib1: <DEC 21050 PCI-PCI bridge> at device 3.0 on pci0
pci1: physical bus=2
found-> vendor=0x1000, dev=0x0001, revid=0x11
bus=2, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=28
map[10]: type 4, range 32, base 00005000, size 8, enabled
map[14]: type 1, range 32, base 81004000, size 8, enabled
found-> vendor=0x1069, dev=0x0001, revid=0x00
bus=2, slot=6, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=48
map[10]: type 4, range 32, base 00005400, size 7, enabled
pci1: <PCI bus> on pcib1
sym0: <810a> port 0x5000-0x50ff mem 0x81004000-0x810040ff irq 28 at device 1.0 on pci1
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c2/a0/00/08/00
sym0: Delay (GEN=11): 251 msec, 35411 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
enabling irq 28, vector 0x9c0
read air = 0x40
read IC_mask = 0xffffffffffffffff
sym0: interrupting at T2 irq 28 (stdio irq 28)
mlx0: <Mylex version 2 RAID interface> port 0x5400-0x547f irq 48 at device 6.0 on pci1
enabling irq 48, vector 0xb00
read air = 0x40
read IC_mask = 0xffffffffefffffff
mlx0: interrupting at T2 irq 48 (stdio irq 48)
mlx0: DAC960P/PD, 3 channels, firmware 2.42-0-00, 4MB RAM
mlx0: Hardware ID 0x03020301
mlx0: Firmware ID 0x30002a02
mlx0: Configured/Actual channels 3/3
mlx0: Max Targets 7
mlx0: Max Tags 2
mlx0: Max System Drives 8
mlx0: Max Arms 8
mlx0: Max Spans 4
mlx0: DRAM/cache/flash/NVRAM size 4194304/3096576/131072/8192
mlx0: DRAM type 0
mlx0: Clock Speed 40ns
mlx0: Hardware Speed 400ns
mlx0: Max Commands 63
mlx0: Max SG Entries 17
mlx0: Max DP 128
mlx0: Max IOD 1024
mlx0: Max Comb 1008
mlx0: Latency 2s
mlx0: SCSI Timeout 6s
mlx0: Min Free Lines 32
mlx0: Rate Constant 50
mlx0: MAXBLK 128
mlx0: Blocking Factor 1 sectors
mlx0: Cache Line Size 16 blocks
mlx0: SCSI Capability 10MHz, 16 bit
mlx0: Firmware Build Number 0
mlx0: Fault Management Type 0
mlx0: Features 0
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 2007MB (4110336 sectors) RAID 1 (online)
Creating DISK mlxd0
mlxd1: <Mylex System Drive> on mlx0
mlxd1: 2007MB (4110336 sectors) RAID 1 (online)
Creating DISK mlxd1
mlxd2: <Mylex System Drive> on mlx0
mlxd2: 2007MB (4110336 sectors) RAID 1 (online)
Creating DISK mlxd2
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81111000-0x8111107f irq 36 at device 7.0 on pci0
enabling irq 36, vector 0xa40
read air = 0x40
read IC_mask = 0xfffeffffefffffff
de0: interrupting at T2 irq 36 (stdio irq 36)
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:23:16:31
bpf: de0 attached
Qlogic ISP Driver, FreeBSD Version 5.4, Core Version 2.0
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x81110000-0x81110fff irq 44 at device 9.0 on pci0
isp0: using Memory space register mapping
enabling irq 44, vector 0xac0
read air = 0x40
read IC_mask = 0xfffeffefefffffff
isp0: interrupting at T2 irq 44 (stdio irq 44)
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, resident F/W Revision 5.57.1
isp0: Last F/W revision was 5.57.1
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
enabling irq 7, vector 0x870
read air = 0x40
read IC_mask = 0xfffeefefefffffff
fdc0: interrupting at T2 irq 6 (stdio irq 7)
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: the current kbd controller command byte 0003
atkbd: keyboard ID 0x83ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
enabling irq 6, vector 0x860
read air = 0x40
read IC_mask = 0xfffeefefefffff7f
atkbd0: interrupting at T2 irq 1 (stdio irq 6)
psm0: current command byte:0043
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 03 3c
psm: status 90 03 3c
psm: status 90 03 3c
psm: data 08 00 00
psm: status 00 00 0a
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
enabling irq 3, vector 0x830
read air = 0x40
read IC_mask = 0xfffeefefefffff3f
psm0: interrupting at T2 irq 12 (stdio irq 3)
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39
3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 190007963 Hz (firmware 190114068 Hz)
i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
sio0: configured irq 4 not in bitmap of probed irqs 0x1
sio0: irq maps: 0 0x1 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
enabling irq 15, vector 0x8f0
read air = 0x40
read IC_mask = 0xfffeefefefffff37
sio0: interrupting at T2 irq 4 (stdio irq 15)
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
ppc0: using normal I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
enabling irq 9, vector 0x890
read air = 0x40
read IC_mask = 0xfffeefefefff7f37
ppc0: interrupting at T2 irq 7 (stdio irq 9)
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
halted CPU 0
halt code = 1
operator initiated halt
PC = fffffc00004f892c
P00>>>~
[EOT]
bash-2.04#
bash-2.04#
bash-2.04#
bash-2.04# exit
Script done on Tue Dec 5 14:59:52 2000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E143dV3-0003yH-00>