Date: Tue, 29 May 2012 08:57:22 -0400 From: Mike Tancsa <mike@sentex.net> To: pyunyh@gmail.com Cc: "freebsd-hardware@freebsd.org" <freebsd-hardware@freebsd.org> Subject: Re: pcie realtek issue (re driver) Message-ID: <4FC4C7B2.8080806@sentex.net> In-Reply-To: <20120530010138.GA9661@michelle.cdnetworks.com> References: <4FC03C83.4030109@sentex.net> <20120530010138.GA9661@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 5/29/2012 9:01 PM, YongHyeon PYUN wrote:
> On Fri, May 25, 2012 at 10:14:27PM -0400, Mike Tancsa wrote:
>> My recent batch of realtek nics seems to have a version that does not
>> work with RELENG_8 or RELENG_9. Anyone know what the issue might be ?
>>
>>
>> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> at device
>> 0.0 on pci4
>> re0: Using 1 MSI-X message
>> re0: turning off MSI enable bit.
>> re0: ASPM disabled
>> re0: Chip rev. 0x7c800000
> ^^^^^^^^^^
>
> If memory serves me right there would be no known controller for
> revision 0x7c800000. Actually I wonder how re(4) can attach to
> this unknown device.
> Did you apply local patch?
Hi,
No, its a stock kernel. If I add
hw.re.msix_disable=1
hw.re.msi_disable=1
it sort of comes up
re0 pnpinfo vendor=0x10ec device=0x8168 subvendor=0x10ec
subdevice=0x8168 class=0x020000 at slot=0 function=0
miibus0
rgephy0 pnpinfo oui=0xe04c model=0x11 rev=0x2 at phyno=1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0xfe200000-0xfe200fff,0xf0000000-0xf0003fff irq 18 at
device 0.0 on pci4
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:0a:cd:1c:ba:89
but doing ifconfig re0 up, does not work as dmesg shows
re0: reset never completed!
re0: PHY write failed
re0: PHY write failed
re0: PHY write failed
re0: PHY write failed
re0: PHY write failed
re0: PHY write failed
re0: PHY write failed
re0@pci0:4:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03
hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd000, size 256, disabled
bar [18] = type Memory, range 64, base 0xfe200000, size 4096, disabled
bar [20] = type Prefetchable Memory, range 64, base 0xf0000000,
size 16384, disabled
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FC4C7B2.8080806>