Date: Mon, 26 Feb 2018 13:35:25 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 226217] if_qlxgb (QLogic cLOM8214) not working for me when configured via netif Message-ID: <bug-226217-8@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D226217 Bug ID: 226217 Summary: if_qlxgb (QLogic cLOM8214) not working for me when configured via netif Product: Base System Version: 11.1-STABLE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: pcm@pogotopia.net Hi, i got an QLogic cLOM8214 (if_qlxgb) which is working fine when i configure = the interface manually: # uname -psr FreeBSD 11.1-RELEASE-p4 amd64 # ifconfig ql1 inet 192.168.200.5 netmask 255.255.255.0 up # ifconfig ql1 ql1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKST= ATE> ether 8c:dc:d4:59:c1:6c hwaddr 8c:dc:d4:59:c1:6c inet 192.168.200.5 netmask 0xffffff00 broadcast 192.168.200.255 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (10Gbase-SR <full-duplex>) status: active # ping 192.168.200.10 PING 192.168.200.10 (192.168.200.10): 56 data bytes 64 bytes from 192.168.200.10: icmp_seq=3D0 ttl=3D255 time=3D0.304 ms 64 bytes from 192.168.200.10: icmp_seq=3D1 ttl=3D255 time=3D0.111 ms But it is not working when configured via netif: rc.conf: ifconfig_ql1=3D"inet 192.168.200.5 netmask 255.255.255.0" # ifconfig ql1 after boot: ql1: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8013b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4,LINKST= ATE> ether 8c:dc:d4:59:c1:6c hwaddr 8c:dc:d4:59:c1:6c inet 192.168.200.5 netmask 0xffffff00 broadcast 192.168.200.255 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect (10Gbase-SR <full-duplex>) status: active # ping 192.168.200.10 PING 192.168.200.10 (192.168.200.10): 56 data bytes --- 192.168.200.10 ping statistics --- 2 packets transmitted, 0 packets received, 100.0% packet loss # dmesg|grep ql1 ql1: <Qlogic ISP 80xx PCI CNA Adapter-Ethernet Function v1.1.36> mem 0xfb800000-0xfb9fffff,0xfb7f0000-0xfb7fffff irq 31 at device 0.1 on pci8 ql1: qla_pci_attach: firmware[4.20.1.1429931003] ql1: Ethernet address: 8c:dc:d4:59:c1:6c ql1: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS) ql1: link state changed to UP ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start ql1: 0x00000000: ff ff ff ff ff ff 8c dc d4 59 c1 6c 08 06 00 01 ql1: 0x00000010: 08 00 06 04 00 01 8c dc d4 59 c1 6c c0 a8 c8 05 ql1: 0x00000020: 00 00 00 00 00 00 c0 a8 c8 05 ql1: qla_dump_buf8: qla_hw_send: wrong pkt dump end ql1: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS) ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start ql1: 0x00000000: ff ff ff ff ff ff 8c dc d4 59 c1 6c 08 06 00 01 ql1: 0x00000010: 08 00 06 04 00 01 8c dc d4 59 c1 6c c0 a8 c8 05 ql1: 0x00000020: 00 00 00 00 00 00 c0 a8 c8 0a ql1: qla_dump_buf8: qla_hw_send: wrong pkt dump end ql1: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS) ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start ql1: 0x00000000: ff ff ff ff ff ff 8c dc d4 59 c1 6c 08 06 00 01 ql1: 0x00000010: 08 00 06 04 00 01 8c dc d4 59 c1 6c c0 a8 c8 05 ql1: 0x00000020: 00 00 00 00 00 00 c0 a8 c8 0a ql1: qla_dump_buf8: qla_hw_send: wrong pkt dump end ql1: qla_hw_send: (nsegs[1, 98, 0x0] > Q8_TX_MAX_SEGMENTS) ql1: qla_dump_buf8: qla_hw_send: wrong pkt 0x62 dump start ql1: 0x00000000: 90 e2 ba eb 01 68 8c dc d4 59 c1 6c 08 00 45 00 ql1: 0x00000010: 00 54 37 be 00 00 40 01 31 8a c0 a8 c8 05 c0 a8 ql1: 0x00000020: c8 0a 08 00 22 30 22 19 00 01 5a 94 07 ae 00 00 ql1: 0x00000030: 66 70 08 09 0a 0b 0c 0d 0e 0f 10 11 12 13 14 15 ql1: 0x00000040: 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 ql1: 0x00000050: 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 ql1: 0x00000060: 36 37 ql1: qla_dump_buf8: qla_hw_send: wrong pkt dump end The driver is loaded via /boot/loader.conf both times. Cheers, Daniel Schossig --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-226217-8>