Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 4 Nov 2005 15:04:23 +0800
From:      Xin LI <delphij@gmail.com>
To:        Mark Kirkwood <markir@paradise.net.nz>
Cc:        freebsd-current@freebsd.org, sos@FreeBSD.org
Subject:   Re: 6.0-RC1 on Promise SX4060 (SETFEATURES FAILURE, READ timed out)
Message-ID:  <a78074950511032304o75aaa701q1a5339a4549f288c@mail.gmail.com>
In-Reply-To: <436A8004.7000401@paradise.net.nz>
References:  <4369BAA5.5040107@paradise.net.nz> <a78074950511022326q1451fda1yb4f506f0d7003931@mail.gmail.com> <436A8004.7000401@paradise.net.nz>

next in thread | previous in thread | raw e-mail | index | archive | help

Hi, Mark,

On 11/4/05, Mark Kirkwood <markir@paradise.net.nz> wrote:
[snip]
> Tried Safe mode with 6.0-RC1 (no boot menu so had to read beastie.4th to
> figure out how to do that):
>
> (loader)
> set hint.acpi.0.disabled = 1
> set loader.acpi_disabled_by_user = 1
> set hint.apic.0.disabled = 1
> set hw.ata.ata_dma = 0
> set hw.ata.atapi_dma = 0
> set hw.ata.wc = 0
> #set hw.eisa_slots = 0 (forgot to type this one... I'll try again with
> it in)
>
> and get exactly the same errors.
>
> Also tried 5.4-RELEASE CD booted in safe mode:
>
> acd0: CDRW <CREATIVE CD-RW RW8439E/1R09> at ata1-master PIO4
> ad4: FAILURE - ATA_IDENTIFY timed out
> ad4: FAILURE - ATA_IDENTIFY timed out
>
> Fatal trap 12: page fault while in kernel mode
> fault virtual address = 0x8
> fault code            = supervisor write, page not present
> instruction pointer   = 0x8:0xc05db50d
> stack pointer         = 0x10:0xe6befc94
> frame pointer         = 0x10:0xe6befc9c
> code segment          = base 0x0, limit 0xfffff, type 0x1b
>                       = DPL 0, pres 1, def32 1, gran 1
> processor eflags      = intrupt enabled, resume, IOPL = 0
> current process       = 5 (thread taskq)
> trap number           = 12
> panic: page fault

Oops, this is beyond my knowledge.  If you have a serial console line
to connect to your box, then do it and try to record the output of
"boot -v" would be helpful.

I have Cc'ed this mail to Soren (our ATA guru) and he may have some suggestions.

Cheers,


Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a78074950511032304o75aaa701q1a5339a4549f288c>