Date: Thu, 12 Jul 2007 18:46:52 GMT From: Carlos MMC <Carlos_MMC@hotmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: conf/114535: Hardware Message-ID: <200707121846.l6CIkqoC081097@www.freebsd.org> Resent-Message-ID: <200707121850.l6CIoCdm085624@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 114535
>Category: conf
>Synopsis: Hardware
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jul 12 18:50:12 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Carlos MMC
>Release: Freebsd 6.2
>Organization:
Eiser Ltda
>Environment:
me podrian ayudar con el hardware 7 dispositivos no reconocido (no driver attached)
>Description:
MODELO DE NOTEBOOK :TOSHIBA SATELLITE A 105 HARMAN/KARDON
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
MPTable: <INTEL Napa ERB >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T1350 @ 1.86GHz (1862.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
real memory = 526843904 (502 MB)
avail memory = 505974784 (482 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <PCI bus> on pcib2
pcib3: <MPTable PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <PCI bus> on pcib3
pci5: <network> at device 0.0 ((no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdc444000-0xdc4443ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> at device 6.0 on pci7
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xdc006000-0xdc0067ff,0xdc000000-0xdc003fff irq 17 at device 6.1 on pci7
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:00:00:00:00:00
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:00:00:00
fwe0: Ethernet address: 02:08:0d:00:00:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci7: <mass storage> at device 6.2 (no driver attached)
pci7: <base peripheral> at device 6.3 (no driver attached)
fxp0: <Intel Pro/100 VE Network Connection> port 0x4000-0x403f mem 0xdc005000-0xdc005fff irq 20 at device 8.0 on pci7
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:d1:58:07:ca
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <INT0800> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 1862017934 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <FUJITSU MHV2080BH PL 00000029> at ata0-master SATA150
acd0: DVDR <MATSHITADVD-RAM UJ-841S/1.60> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 36 files 10
ums0: vendor 0x15ca USB Optical Mouse, rev 2.00/5.12, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
#
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707121846.l6CIkqoC081097>