Date: Thu, 18 Jun 2009 18:40:04 GMT From: Derek Kulinski <takeda@ucla.edu> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/135690: [panic] [ata] ufs_dirbad: /backuphd: bad dir ino 22259126 at offset 0: mangled entry Message-ID: <200906181840.n5IIe4s0066579@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/135690; it has been noted by GNATS. From: Derek Kulinski <takeda@ucla.edu> To: bug-followup@FreeBSD.org, takeda@takeda.tk Cc: Subject: Re: kern/135690: [panic] [ata] ufs_dirbad: /backuphd: bad dir ino 22259126 at offset 0: mangled entry Date: Thu, 18 Jun 2009 11:35:06 -0700 I have smartd running periodically and do scan on the disk. Here's its current output. I run short scan an it didn't get any error. I'm running the extended one, but for some reason it doesn't show progress I'll check in 4 hours if it indeed is working... Though disk seems to be operating (it doesn't go to sleep as it usually does when it is not in use). Here's output as of now: smartctl version 5.38 [i386-portbld-freebsd7.1] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE family Device Model: WDC WD5000AAKB-00YSA0 Serial Number: WD-WCAS84876881 Firmware Version: 12.01C02 User Capacity: 500 107 862 016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 18 11:30:39 2009 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (13200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 154) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x203f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 192 173 021 Pre-fail Always - 5400 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 918 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10577 10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 918 194 Temperature_Celsius 0x0022 091 083 000 Old_age Always - 59 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10574 - # 2 Short offline Aborted by host 90% 10574 - # 3 Short offline Aborted by host 50% 10574 - # 4 Short offline Completed without error 00% 10570 - # 5 Short offline Completed without error 00% 8674 - # 6 Short offline Completed without error 00% 8650 - # 7 Extended offline Completed without error 00% 8628 - # 8 Short offline Completed without error 00% 8602 - # 9 Short offline Completed without error 00% 7046 - #10 Short offline Completed without error 00% 7022 - #11 Short offline Completed without error 00% 6998 - #12 Short offline Completed without error 00% 6974 - #13 Extended offline Completed without error 00% 6952 - #14 Short offline Completed without error 00% 6926 - #15 Short offline Completed without error 00% 6902 - #16 Short offline Completed without error 00% 6878 - #17 Short offline Completed without error 00% 6854 - #18 Short offline Completed without error 00% 6830 - #19 Short offline Completed without error 00% 6806 - #20 Extended offline Completed without error 00% 6785 - #21 Short offline Completed without error 00% 6759 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200906181840.n5IIe4s0066579>