Date: Fri, 19 Jan 2001 23:41:53 -0500 From: Will Andrews <will@physics.purdue.edu> To: FreeBSD Multimedia <multimedia@FreeBSD.org> Subject: Dealing with IRQ conflicts & PCM in presence of SMP Message-ID: <20010119234153.A480@puck.firepipe.net>
next in thread | raw e-mail | index | archive | help
--WplhKdTI2c8ulnbP
Content-Type: multipart/mixed; boundary="+pHx0qQiF2pBVqBT"
Content-Disposition: inline
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
[ Please keep me on CC: as I'm not subscribed. Thanks! ]
Hi all,
I recently upgraded my system from a single PII-450 to a dual PIII-600E.
A casualty of this upgrade has been my soundcard, which no longer (for
what is apparently irq conflicts) works (but is recognized). I've tried
everything from disabling serial & parallel ports (really don't need
them anyway) and making the BIOS preference for PCI Slot 2 (which is the
soundcard) IRQ 3 or 4 (depending on which sio port was disabled).
Ech. Attached below are dmesg & kernel config & pciconf / sndstat /
mixer status. I am using Alexander Matey's au88x0 driver for the Aureal
Vortex 2-based Diamond Monster Sound MX300 card.
My motherboard is a Supermicro SUPER P6DGU, in case that helps.
TIA,
--=20
wca
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.out"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Fri Jan 19 23:05:41 EST 2001
will@puck.firepipe.net:/a/stable/src/sys/compile/PUCK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x683 Stepping =3D 3
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 671088640 (655360K bytes)
avail memory =3D 647512064 (632336K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 10
IOAPIC #0 intpin 17 -> irq 11
IOAPIC #0 intpin 18 -> irq 9
IOAPIC #0 intpin 19 -> irq 5
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc043a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI model 5046 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on=
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: Invalid irq 255
uhci0: Please switch on USB support and switch PNP-OS to 'No' in BIOS
device_probe_and_attach: uhci0 attach returned 6
intpm0: <Intel 82371AB Power management controller> port 0x440-0x44f irq 9 =
at device 7.3 on pci0
intpm0: I/O mapped 440
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 400=20
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xffa=
ff000-0xffafffff irq 10 at device 14.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=3D7, 32/255 SCBs
pcm0: <Aureal Vortex 8830> port 0xefe0-0xefe7,0xeff0-0xeff7 mem 0xffa80000-=
0xffabffff irq 10 at device 15.0 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xffafef80-0=
xffafefff irq 11 at device 16.0 on pci0
xl0: Ethernet address: 00:50:04:18:02:63
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905B-TX Fast Etherlink XL> port 0xe480-0xe4ff mem 0xffafef00-0=
xffafef7f irq 9 at device 18.0 on pci0
xl1: Ethernet address: 00:50:04:d0:d9:c2
miibus1: <MII bus> on xl1
xlphy1: <3Com internal media interface> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA100 controller> port 0xef00-0xef3f,0xefa0-0xefa3,0xef6=
8-0xef6f,0xefa4-0xefa7,0xefa8-0xefaf mem 0xffa20000-0xffa3ffff irq 5 at dev=
ice 20.0 on pci0
ata2: at 0xefa8 on atapci1
ata3: at 0xef68 on atapci1
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=3D0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (000608)
IPv6 packet filtering initialized, unlimited logging
IP packet filtering initialized, divert enabled, rule-based forwarding enab=
led, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.8 initialized. Default =3D pass all, Logging =3D enabled
SMP: AP CPU #1 Launched!
ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master UDMA100
ad6: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata3-master UDMA100
Waiting 15 seconds for SCSI devices to settle
pass1 at ahc0 bus 0 target 2 lun 0
pass1: <UMAX SuperVista S-12 V1.9> Fixed Scanner SCSI-2 device=20
pass1: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DRVS09V 0140> Fixed Direct Access SCSI-3 device=20
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing En=
abled
da0: 8754MB (17928698 512 byte sectors: 255H 63S/T 1116C)
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device=20
cd0: 8.333MB/s transfers (8.333MHz, offset 31)
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
da1 at ahc0 bus 0 target 5 lun 0
da1: <IOMEGA ZIP 100 PLUS J.66> Removable Direct Access SCSI-2 device=20
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=PUCK
machine i386 # x86 architecture
cpu I686_CPU # Machine is PII/PIII
ident PUCK # puck.firepipe.net
maxusers 512 # We run lots of stuff on it
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options IPSEC # IP security
options IPSEC_ESP # IP security (crypto)
options FFS # Berkeley Fast Filesystem
options FFS_ROOT # FFS usable as root device
options NFS # Network Filesystem
options NFS_ROOT # NFS usable as root device
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options CD9660_ROOT # CD-ROM usable as root
options PROCFS # Process filesystem
options COMPAT_43 # Compatible with BSD 4.3
options SCSI_DELAY=15000 # Delay before probing SCSI
options UCONSOLE # Allow users to grab console
options USERCONFIG # boot -c editor
options VISUAL_USERCONFIG # visual boot -c editor
options INCLUDE_CONFIG_FILE # include this in kernel symbols
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SHMALL=1025 # SHM-related
options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)" # SHM max size
options SHMMAXPGS=4096 # SHM max pages
options SHMMIN=2 # SHM min ?
options SHMMNI=33 # SHM?
options SHMSEG=100 # SHM?
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B # Posix real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING # POSIX priority scheduling
options ICMP_BANDLIM # Rate limit bad replies
options SMP # Symmetric MultiProcessor (SMP)
options APIC_IO # SMP: (APIC) I/O
#options NCPU=2 # SMP: number of CPUs
#options NBUS=4 # SMP: number of busses
#options NAPIC=1 # SMP: number of IO APICs
#options NINTR=24 # SMP: number of INTs
options SOFTUPDATES # ffs speedups
options IPFIREWALL # IP Firewall (IPFW)
options IPFIREWALL_VERBOSE # IPFW: Logging support
options IPDIVERT # IPFW: divert(4) support
options IPFIREWALL_FORWARD # IPFW: Forwarding support
options DUMMYNET # IPFW: Bandwidth piping
options IPSTEALTH # IPFW: Stealth forwarding
options IPV6FIREWALL # IP6 Firewall (IP6FW)
options IPV6FIREWALL_VERBOSE # IP6FW: logging
options IPFILTER # IPFilter (IPF)
options IPFILTER_LOG # IPF: Logging support
options TCP_RESTRICT_RST # TCP: Restrict emission of RST
options CAMDEBUG # CAM debugging code
options CAM_DEBUG_BUS=-1 # CAM: Default bus
options CAM_DEBUG_TARGET=-1 # CAM: Default target
options CAM_DEBUG_LUN=-1 # CAM: Default LUN
options TCP_DROP_SYNFIN # TCP: Drop packets with SYN+FIN
options TCP_RESTRICT_RST # TCP: Restrict emission of RST
device isa # ISA bus
device pci # PCI bus
device fdc0 at isa? port IO_FD1 irq 6 drq 2 # floppy controller
device fd0 at fdc0 drive 0 # floppy drive
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
options ATA_STATIC_ID #Static device numbering
device ahc # AHA2940 and onboard AIC7xxx devices
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device pt # processor type
device ses # SCSI SES/SAF-TE driver
device atkbdc0 at isa? port IO_KBD # keyboard controller
device atkbd0 at atkbdc? irq 1 # keyboard
device psm0 at atkbdc? irq 12 # ps/2 mouse
device vga0 at isa? # vga support
device sc0 at isa? # syscons
device npx0 at nexus? port IO_NPX irq 13 # floating point
device sio0 at isa? port IO_COM1 flags 0x10 irq 4 # COM1
#device sio1 at isa? port IO_COM2 irq 3 # COM2
#device sio2 at isa? port IO_COM3 irq 5 # COM3
#device sio3 at isa? disable port IO_COM4 irq 9 # COM4
#device ppc0 at isa? irq 7 # Parallel port
device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
device vpo # Iomega Zip - Requires scbus and da
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device smbus # SMBus (SMB)
device intpm # PIIX4 (IO)
device smb # SMB: actual device
device iicbus # IICBus (I2C)
device ic # I2C: network interface
device iic # I2C: standard i/o
device iicsmb # I2C: SMB support
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device ppp 1 # Kernel PPP
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 2 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
pseudo-device bpf # Berkeley packet filter
pseudo-device splash # Splash device
device pcm # Sound support.
device usb # Generic USB code (USB)
device uhci # USB: UHCI controller
device ohci # USB: OHCI controller
device ugen # USB: Generic device driver
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="pciconf.out"
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71a08086 rev=0x00 hdr=0x00
pcib2@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71a18086 rev=0x00 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
intpm0@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
ahc0@pci0:14:0: class=0x010000 card=0x000f9005 chip=0x001f9005 rev=0x00 hdr=0x00
pcm0@pci0:15:0: class=0x040100 card=0x30011092 chip=0x000212eb rev=0xfe hdr=0x00
xl0@pci0:16:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00
xl1@pci0:18:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00
atapci1@pci0:20:0: class=0x018000 card=0x4d33105a chip=0x4d30105a rev=0x02 hdr=0x00
none0@pci1:0:0: class=0x030000 card=0x00281002 chip=0x50461002 rev=0x00 hdr=0x00
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="mixer.out"
Mixer vol is currently set to 75:75
Mixer bass is currently set to 50:50
Mixer treble is currently set to 50:50
Mixer pcm is currently set to 75:75
Mixer speaker is currently set to 75:75
Mixer line is currently set to 75:75
Mixer mic is currently set to 0:0
Mixer cd is currently set to 75:75
Mixer rec is currently set to 0:0
Mixer ogain is currently set to 50:50
Mixer line1 is currently set to 75:75
Mixer phin is currently set to 0:0
Mixer video is currently set to 75:75
--+pHx0qQiF2pBVqBT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="sndstat.out"
FreeBSD Audio Driver (newpcm) Jan 19 2001 23:05:30
Installed devices:
pcm0: <Aureal Vortex 8830> at memory 0xffa80000 irq 10 (4p/1r channels duplex)
--+pHx0qQiF2pBVqBT--
--WplhKdTI2c8ulnbP
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.4 (FreeBSD)
Comment: For info see http://www.gnupg.org
iD8DBQE6aRcQF47idPgWcsURAp2XAJ4gaBfPof3Uh/PRh/sTlUSWvdDvlQCfTFu4
oT/k7bsJGb5RoH5bNb7pNjs=
=lSIw
-----END PGP SIGNATURE-----
--WplhKdTI2c8ulnbP--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010119234153.A480>