Date: Wed, 31 Jul 1996 18:10:46 +0200 (MET DST) From: hohmuth@inf.tu-dresden.de (Michael Hohmuth) To: FreeBSD-gnats-submit@freebsd.org Subject: kern/1450: visual UserConfig doesn't work with pcvt console Message-ID: <199607311610.SAA12022@irs201.inf.tu-dresden.de> Resent-Message-ID: <199607311620.JAA08855@freefall.freebsd.org>
index | next in thread | raw e-mail
>Number: 1450
>Category: kern
>Synopsis: visual UserConfig doesn't work with pcvt console
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jul 31 09:20:01 PDT 1996
>Last-Modified:
>Originator: Michael Hohmuth
>Organization:
Dept. of Computer Science, TU Dresden, Germany
>Release: FreeBSD 2.1.5-RELEASE i386
>Environment:
"uname -a" yields:
FreeBSD olymp.inf.tu-dresden.de 2.1.5-RELEASE FreeBSD 2.1.5-RELEASE #0: Sat Jul 27 03:11:06 MET DST 1996 root@olymp.inf.tu-dresden.de:/usr/src/sys/compile/OLYMP i386
Here's my kernel config file:
machine "i386"
#cpu "I386_CPU"
cpu "I486_CPU"
#cpu "I586_CPU"
ident OLYMP
maxusers 10
#options DIAGNOSTIC # turn on various sanity checks
options KTRACE #kernel tracing
options BROKEN_KEYBOARD_RESET
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
#options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
#controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#device wcd0 #IDE CD-ROM
controller ncr0
#controller ahc0
#controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
#controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller ahc1 at isa? bio irq ? vector ahcintr
#controller ahb0 at isa? bio irq ? vector ahbintr
#controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
#controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr
#controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
controller scbus0
device sd0
device st0
device cd0 #Only need one of these, the code dynamically grows
#device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
#device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr
#controller matcd0 at isa? port ? bio
#device scd0 at isa? port 0x230 bio
# syscons is the default console driver, resembling an SCO console
#device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint
options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1
options XSERVER # include code for XFree86
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
#device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
#device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
#device lpt1 at isa? port? tty
#device lpt2 at isa? port? tty
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 16
pseudo-device bpfilter 4 #Berkeley packet filter
pseudo-device gzip # Exec gzipped a.out's
pseudo-device vn # Vnode driver (turns a file into a device)
>Description:
When using the PCVT console driver, in visual UserConfig, the cursor
keys don't work.
The other keys (Tab, "q" etc.) still work OK.
>How-To-Repeat:
Configure a kernel to use the PCVT console driver.
Boot the kernel with "-c".
Type "visual".
Try using the arrow keys.
>Fix:
Use the dumb console UserConfig, or don't use the PCVT console driver
>Audit-Trail:
>Unformatted:
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607311610.SAA12022>