Date: Thu, 9 Sep 2010 14:28:26 +0400 From: Igor Sysoev <is@rambler-co.ru> To: freebsd-net@FreeBSD.org Subject: bge hangs on recent 7.3-STABLE Message-ID: <20100909102826.GB53812@rambler-co.ru>
next in thread | raw e-mail | index | archive | help
Hi, I have several hosts running FreeBSD/amd64 7.2-STABLE updated on 11.01.2010 and 25.02.2010. Hosts process about 10K input and 10K output packets/s without issues. One of them, however, is loaded more than others, so it processes 20K/20K packets/s. Recently, I have upgraded one host to 7.3-STABLE, 24.08.2010. Then bge on this host hung two times. I was able to restart it from console using: /etc/rc.d/netif restart bge0 Then I have upgraded the most loaded (20K/20K) host to 7.3-STABLE, 07.09.2010. After reboot bge hung every several seconds. I was able to restart it, but bge hung again after several seconds. Then I have downgraded this host to 7.3-STABLE, 14.08.2010, since there were several if_bge.c commits on 15.08.2010. The same hangs. Then I have downgraded this host to 7.3-STABLE, 17.03.2010, before the first if_bge.c commit after 25.02.2010. Now it runs without hangs. The hosts are amd64 dual core SMP with 4G machines. bge information: bge0@pci0:4:0:0: class=0x020000 card=0x165914e4 chip=0x165914e4 rev=0x11 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme Gigabit Ethernet PCI Express (BCM5721)' bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xfe5f0000-0xfe5fffff irq 19 at device 0.0 on pci4 miibus1: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:e0:81:5f:6e:8a bge has 3 vlans: bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 15 00 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:e0:81:5f:6e:8a media: Ethernet autoselect (1000baseTX <full-duplex>) status: active vlan173: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:e0:81:5f:6e:8a inet 192.168.173.101 netmask 0xffffff00 broadcast 192.168.173.255 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active vlan: 173 parent interface: bge0 [ ... ] -- Igor Sysoev http://sysoev.ru/en/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100909102826.GB53812>