Date: Fri, 31 Jan 2003 10:25:03 -0800 From: Mahlon <mahlon-dated-1044469504.b76ce5@martini.nu> To: Roberto de Iriarte <roberto@spock.cl> Cc: freebsd-alpha <freebsd-alpha@FreeBSD.ORG> Subject: Re: Fwd: Compaq ES40 Alpha, FreeBSD 5.0-RELEASE - install issue. Message-ID: <20030131182503.GA46207@martini.nu> In-Reply-To: <3E39AE9C.30908@spock.cl> References: <20030130014021.GH91756@martini.nu> <20030130081058.B46898@freebie.xs4all.nl> <3E39458B.1070909@spock.cl> <20030130184137.GI91756@martini.nu> <20030130205543.B50224@freebie.xs4all.nl> <20030130225355.GJ91756@martini.nu> <3E39AE9C.30908@spock.cl>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
On Thu, Jan 30, 2003, Roberto de Iriarte wrote:
> Sorry to bother you but we would be particulary interested in what happens
> after that, that is, the boot messages from the kernel, from the
> FreeBSD 5.0 ... forth
Whoops. Here's the rest of it.
I included some notes at the bottom.
--------------------------------------------------------------------------
SROM V2.5-F CPU # 00 @ 0500 MHz
SROM program starting
Starting secondary on CPU #1
Starting secondary on CPU #2
Starting secondary on CPU #3
Bcache data tests in progress
Bcache address test in progress
CPU parity and ECC detection in progress
Bcache ECC data tests in progress
Bcache TAG lines tests in progress
Memory sizing in progress
Memory configuration in progress
Memory data test in progress
Memory address test in progress
Memory pattern test in progress
Memory thrashing test in progress
Memory initialization
Loading console
Code execution complete (transfer control)
OpenVMS PALcode V1.97-3, Tru64 UNIX PALcode V1.91-4
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 1ae000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing hardware
initializing timer data structures
lowering IPL
CPU 0 speed is 500 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
Memory size 4096 MB
testing memory
...
probe I/O subsystem
probing hose 1, PCI
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 2 -- ewa -- DE500-BA Network Controller
bus 0, slot 3 -- pka -- NCR 53C895
bus 0, slot 15 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 15 -- dqb -- Acer Labs M1543C IDE
starting drivers
entering idle loop
initializing keyboard
starting console on CPU 1
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 1 speed is 500 MHz
create powerup
entering idle loop
starting console on CPU 2
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 2 speed is 500 MHz
create powerup
starting console on CPU 3
initialized idle PCB
initializing idle process PID
lowering IPL
CPU 3 speed is 500 MHz
create powerup
Partition 0, Memory base: 000000000, size: 100000000
initializing GCT/FRU at 1dc000
Initializing pka ewa dqa dqb
Memory Testing and Configuration Status
Array Size Base Address Intlv Mode
--------- ---------- ---------------- ----------
0 2048Mb 0000000000000000 2-Way
1 2048Mb 0000000080000000 2-Way
4096 MB of System Memory
Testing the System
Testing the Disks (read only)
Testing the Network
AlphaServer ES40 Console V6.4-17, built on Dec 10 2002 at 08:57:31
CPU 0 booting
(boot dqa0.0.0.15.0 -flags 0)
block 0 of dqa0.0.0.15.0 is a valid boot block
reading 390 blocks from dqa0.0.0.15.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 30c00(199680)
initializing HWRPB at 2000
initializing page table at 3fb56000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4000300010161
OSF PAL rev: 0x400040002015b
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@mithlond.btc.adaptec.com, Thu Jan 16 19:48:37 GMT 2003)
Memory: 4194304 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x433770+0x64fd0 syms=[0x8+0x5e548+0x8+0x482da]
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xfffffc000033da50...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Fri Jan 17 01:14:51 GMT 2003
root@mithlond.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000c7a000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000c7a0d0.
ST6600
AlphaServer ES40, 500MHz
8192 byte page size, 4 processors.
CPU: EV6 (21264) major=8 minor=7 extensions=0x303<BWX,FIX,MVI,PRECISE>
OSF PAL rev: 0x400040002015b
real memory = 4287922176 (4089 MB)
avail memory = 4164386816 (3971 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Initializing GEOMetry subsystem
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc000083ef78
tsunami0: <21271 Core Logic chipset>
pcib0: <21271 PCI host bus adapter> on tsunami0
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 1.0 (no driver attached)
dc0: <Intel 21143 10/100BaseTX> port 0x1100-0x117f mem 0x1866100-0x186617f irq 12 at device 2.0 on pci0
dc0: interrupting at TSUNAMI irq 12
dc0: Ethernet address: 08:00:2b:c4:d5:cb
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <895> port 0x1000-0x10ff mem 0x1864000-0x1864fff,0x1866000-0x18660ff irq 16 at device 3.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: interrupting at TSUNAMI irq 16
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x1190-0x119f,0x374-0x377,0x170-0x17f,0x3f4-0x3f7,0x1f0-0x1ff irq 238 at device 15
.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: interrupting at ISA irq 14
ata1: at 0x170 irq 15 on atapci0
ata1: interrupting at ISA irq 15
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1865000-0x1865fff irq 234 at device 19.0 on pci0
ohci0: interrupting at ISA irq 10
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pcib1: <21271 PCI host bus adapter> on tsunami0
pci1: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "i8254" frequency 1193182 Hz
Timecounters tick every 0.976 msec
ata0-slave: ATAPI identify retries exceeded
acd0: CDROM <COMPAQ CDR-8435> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BD009122BA 3B08> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BD009122BA 3B09> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/md0
WARNING: clock gained 7319 days -- CHECK AND RESET THE DATE!
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).
5 ...................... xterm terminal emulator.
Your choice: (1-5) 5
module_register: module pci/if_txp already exists!
Module pci/if_txp failed to register: 17
module_register: module pci/if_pcn already exists!
Module pci/if_pcn failed to register: 177, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
module_register: module pcn/miibus already exists!
Module pcn/miibus failed to register: 17 port 0x70-0x71 on isa0
module_register: module pci/if_vr already exists!
Module pci/if_vr failed to register: 170>
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
module_register: module cardbus/if_xl already exists!
Module cardbus/if_xl failed to register: 17
module_register: module pci/if_xl already exists!
Module pci/if_xl failed to register: 17
module_register: module xl/miibus already exists! 0xa0000-0xbffff on isa0
Module xl/miibus failed to register: 17Hz
module_register: module pci/if_vx already exists!
Module pci/if_vx failed to register: 17eded
module_register: module pci/if_rl already exists!
Module pci/if_rl failed to register: 17settle
module_register: module cardbus/if_rl already exists!
Module cardbus/if_rl failed to register: 17
module_register: module rl/miibus already exists! SCSI-2 device
Module rl/miibus failed to register: 17ffset 15, 16bit), Tagged Queueing Enabled
module_register: module cardbus/if_dc already exists!
Module cardbus/if_dc failed to register: 17
module_register: module pci/if_dc already exists!
Module pci/if_dc failed to register: 17
module_register: module dc/miibus already exists!
Module dc/miibus failed to register: 17
module_register: module pci/if_de already exists!
Module pci/if_de failed to register: 17
module_register: module pci/if_tl already exists!
Module pci/if_tl failed to register: 17
module_register: module tl/miibus already exists!
Module tl/miibus failed to register: 17
interface miibus.1 already present in the KLD 'kernel'!
module_register: module pci/if_fxp already exists!
Module pci/if_fxp failed to register: 17
module_register: module cardbus/if_fxp already exists!
Module cardbus/if_fxp failed to register: 17
module_register: module fxp/miibus already exists!
Module fxp/miibus failed to register: 17
can't re-use a leaf (fxp_rnr)!
--------------------------------------------------------------------------
FreeBSD Disklabel Editor
Part Mount Size Newfs Part Mount Size Newfs
The following commands are valid here (upper or lower case):
C = Create D = Delete M = Mount pt.
N = Newfs Opts Q = Finish S = Toggle SoftUpdates Z = Custom Newfs
T = Toggle Newfs U = Undo A = Auto Defaults R = Delete+Merge
Use F1 or ? to get more help, arrow keys to select.
--------------------------------------------------------------------------
So, being on a deadline, I grudgingly tried to install RedHat last night.
To my surprise, it had the same problem - it couldn't write partition
information to to the dka0 drive. Suspecting a bad drive, I swapped it for
a fresh one. RH seemed content enough after doing this, however FreeBSD
now exhibits a different behavior: As shown above, it doesn't show the
disk slice. So no partitions can be made, yadda yadda.
Let me know if you need any additional info on the machine, I'd love to see
the ES40 in the supported list.
Thanks guys.
-Mahlon
Mahlon E. Smith jabber id: mahlon@chat.martini.nu
http://www.martini.nu/ get pgp key: mahlon-pgp@martini.nu
........................................................................
Tact, n.: The unsaid part of what you're thinking.
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
iD8DBQE+Or9/wL5r+zYGsmcRAr3eAJ42XnSSB+cTL2XU1Bj3q4VbBp3JwgCfWvCL
lJaYXhESfVKAVlt9MwF58Vk=
=fc+d
-----END PGP SIGNATURE-----
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030131182503.GA46207>