Skip site navigation (1)Skip section navigation (2)
Date:      Sat,  1 Sep 2001 16:21:01 -0700 (PDT)
From:      Mike Harding <mvh@ix.netcom.com>
To:        stable@freebsd.org
Subject:   ah! the dread 'silo overflow' returns!
Message-ID:  <20010901232101.33FF513120@netcom1.netcom.com>

next in thread | raw e-mail | index | archive | help

I have been getting 'silo overflow' messages for a week or two, on
recent buildworld (for, example, today).  I am using a 56K modem, 1.3
GHz Athlon, IDE, etc.  Is this a known issue??? I remember this from
the bad old days, but I haven't seen it in a while.

- Mike H.

'dmesg' for those who need to know...

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RC #0: Sat Sep  1 09:51:23 PDT 2001
    mvh@netcom1.netcom.com:/usr/obj/usr/src/sys/MIKEIPF
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1343.06-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory  = 536788992 (524208K bytes)
config> enable apm0
config> irq apm0 0
config> flags apm0 0x20
config> quit
avail memory = 519024640 (506860K bytes)
Preloaded elf kernel "kernel" at 0xc033a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc033a09c.
Preloaded elf module "ipl.ko" at 0xc033a0ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1720
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia GeForce2 GTS graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 4.3 irq 9
pci0: <unknown card> (vendor=0x1412, dev=0x1712) at 11.0 irq 10
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 9 at device 13.0 on pci0
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xd5800000-0xd581ffff irq 10 at device 17.0 on pci0
ata2: at 0x8400 on atapci1
ata3: at 0x7800 on atapci1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.20 initialized.  Default = pass all, Logging = enabled
ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master tagged UDMA100
ad1: 6149MB <WDC AC36400L> [13328/15/63] at ata0-slave UDMA33
acd0: CDROM <CDU5211> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
tun0: promiscuous mode enabled
sio0: 1 more silo overflow (total 1)


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010901232101.33FF513120>