Date: Wed, 15 Sep 2004 09:13:15 +0200 From: DanGer <danger@wilbury.sk> To: current@freebsd.org Subject: Re: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611 Message-ID: <259306135.20040915091315@wilbury.sk> In-Reply-To: <20040915.021427.74736836.fujita@soum.co.jp> References: <20040915.021427.74736836.fujita@soum.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello FUJITA,
Tuesday, September 14, 2004, 7:14:27 PM, you wrote:
> Hi,
> My 6.0-CURRENT box says, such as
> ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
> ad0: WARNING - READ_DMA no interrupt but good status
> I replaced the ad0 with brand-new HDD, but I still got same messages.
> The box has 3 HDDs(ad0,ad1,ad3) and DVD(acd0) drive, but the messages
> comes only from ad0.
> What is happening?
> Cable problem or ATA controller problem?
I'm getting this errors too on 5.2.1, so I don't know what's going on.
The HDD is about 3 a 2 months old and not under big load.
And my box uses to freeze because of these errors...
here is my dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p9 #0: Thu Aug 5 09:31:46 CEST 2004
danger@daemon.rulez.sk:/usr/obj/usr/src/sys/daemon
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07aa000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1100MHz (1116.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402587648 (383 MB)
avail memory = 384618496 (366 MB)
Pentium Pro MTRR support enabled
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fd950
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 11
pcib0: slot 31 INTC is routed to irq 9
pcib0: slot 31 INTB is routed to irq 5
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 12
pcib2: slot 2 INTA is routed to irq 5
pcib2: slot 6 INTA is routed to irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem 0xd9000000-0xd900007f irq 12 at device 0.0 on pci2
xl0: Ethernet address: 00:04:76:14:be:1d
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 2.0 (no driver attached)
atapci0: <HighPoint HPT370 UDMA100 controller> port 0xa400-0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at device 6.0 on pci2
atapci0: [MPSAFE]
ata2: at 0x9400 on atapci0
ata2: [MPSAFE]
ata3: at 0x9c00 on atapci0
ata3: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <serial bus, USB> at device 31.4 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1116829062 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
GEOM: create disk ad0 dp=0xc3b11e60
ad0: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata0-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: /data was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Accounting enabled
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=161995103
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3609119
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3610303
ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831
ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3941919
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942047
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=3943263
ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064383
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767239
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=3767063
spec_getpages:(ad0s1e) I/O read failure: (error=5) bp 0xcb6d98c8 vp 0xc3c0c514
size: 65536, resid: 65536, a_count: 65536, valid: 0x0
nread: 0, reqpage: 7, pindex: 142, pcount: 16
--
Best regards
+----------==/\/\==----------+
| DanGer <danger@wilbury.sk> |
| DanGer@IRCnet ICQ261701668 |
| http://danger.homeunix.org |
+----------==\/\/==----------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?259306135.20040915091315>