Date: Mon, 02 Mar 2009 15:34:20 -0500 From: Joe Marcus Clarke <marcus@FreeBSD.org> To: Robert Noland <rnoland@FreeBSD.org> Cc: current <current@FreeBSD.org> Subject: Re: Continuing saga: FreeBSD -CURRENT hangs with ATA code after April 9, 2008 Message-ID: <1236026060.37252.97.camel@shumai.marcuscom.com> In-Reply-To: <1236025544.1236.45.camel@widget.2hip.net> References: <1236024536.37252.93.camel@shumai.marcuscom.com> <1236025544.1236.45.camel@widget.2hip.net>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] On Mon, 2009-03-02 at 14:25 -0600, Robert Noland wrote: > On Mon, 2009-03-02 at 15:08 -0500, Joe Marcus Clarke wrote: > > I started this thread on May 31 of last year: > > > > http://lists.freebsd.org/pipermail/freebsd-current/2008-May/085923.html > > > > The problem remains as of: > > > > FreeBSD fugu.marcuscom.com 8.0-CURRENT FreeBSD 8.0-CURRENT #12: Sun Mar > > 1 16:10:52 EST 2009 > > gnome@fugu.marcuscom.com:/space/obj/usr/src/sys/FUGU i386 > > > > The only way I can boot this system is to hack in the ATA code from > > April 9, 2008. I would love just to be able to boot this guy on a > > default -CURRENT. > > I'll note that in your previous posts, it suggests that the new code > claims a 40pin cable, while the old clams an 80pin. I have no clue if > that is relevant though... I think that's the CD drive which reports as 80-pin. The SATA drive doesn't appear at all with the new code. This is the only line which I think applies to it: ata3: identify ch->devices=00000001 Additionally, I have since tried a serial console in a hope to get an actual trace of what the kernel is doing, but it doesn't work. I am unable to get any more of a clue as to where the hang is occurring. Joe > > robert. > > > I see that I didn't include the pciconf output before, so here it is: > > > > hostb0@pci0:0:0:0: class=0x060000 card=0x01561028 chip=0x25788086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82875P/E7210 DRAM Controller / Host-Hub Interface' > > class = bridge > > subclass = HOST-PCI > > pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 > > rev=0x02 hdr=0x01 > > vendor = 'Intel Corporation' > > device = '82875P PCI-to-AGP Bridge' > > class = bridge > > subclass = PCI-PCI > > uhci0@pci0:0:29:0: class=0x0c0300 card=0x01561028 chip=0x24d28086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > > class = serial bus > > subclass = USB > > uhci1@pci0:0:29:1: class=0x0c0300 card=0x01561028 chip=0x24d48086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > > class = serial bus > > subclass = USB > > uhci2@pci0:0:29:2: class=0x0c0300 card=0x01561028 chip=0x24d78086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > > class = serial bus > > subclass = USB > > uhci3@pci0:0:29:3: class=0x0c0300 card=0x01561028 chip=0x24de8086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > > class = serial bus > > subclass = USB > > ehci0@pci0:0:29:7: class=0x0c0320 card=0x01561028 chip=0x24dd8086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller' > > class = serial bus > > subclass = USB > > pcib2@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 > > rev=0xc2 hdr=0x01 > > vendor = 'Intel Corporation' > > device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub > > Interface to PCI Bridge' > > class = bridge > > subclass = PCI-PCI > > isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' > > class = bridge > > subclass = PCI-ISA > > atapci1@pci0:0:31:1: class=0x01018a card=0x01561028 chip=0x24db8086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' > > class = mass storage > > subclass = ATA > > atapci2@pci0:0:31:2: class=0x01018f card=0x01561028 chip=0x24d18086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB (ICH5) SATA Controller' > > class = mass storage > > subclass = ATA > > ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x01561028 chip=0x24d38086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82801EB/ER (ICH5/ICH5R) SMBus Controller' > > class = serial bus > > subclass = SMBus > > none0@pci0:0:31:5: class=0x040100 card=0x01561028 chip=0x24d58086 > > rev=0x02 hdr=0x00 > > vendor = 'Intel Corporation' > > device = '815B104D multimedia audio device (codec AC97) SoundMAX > > or VIA' > > class = multimedia > > subclass = audio > > vgapci0@pci0:1:0:0: class=0x030000 card=0x20021002 chip=0x59611002 > > rev=0x01 hdr=0x00 > > vendor = 'ATI Technologies Inc' > > device = 'RV280 ATI RADEON 9200 se agp' > > class = display > > subclass = VGA > > vgapci1@pci0:1:0:1: class=0x038000 card=0x20031002 chip=0x59411002 > > rev=0x01 hdr=0x00 > > vendor = 'ATI Technologies Inc' > > device = 'RV280 ATI Radeon 9200 - Secondary' > > class = display > > fwohci0@pci0:2:0:0: class=0x0c0010 card=0x80101028 chip=0x581111c1 > > rev=0x61 hdr=0x00 > > vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' > > device = 'FW322 1394A PCI PHY/Link Open Host Ctrlr I/F' > > class = serial bus > > subclass = FireWire > > atapci0@pci0:2:1:0: class=0x018000 card=0x3375105a chip=0x3375105a > > rev=0x02 hdr=0x00 > > vendor = 'Promise Technology Inc' > > device = 'PDC20375(??) FastTrak SATA150 TX2plus Controller' > > class = mass storage > > mpt0@pci0:2:3:0: class=0x010000 card=0x10401028 chip=0x00301000 rev=0x07 > > hdr=0x00 > > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > > device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' > > class = mass storage > > subclass = SCSI > > mpt1@pci0:2:3:1: class=0x010000 card=0x10401028 chip=0x00301000 rev=0x07 > > hdr=0x00 > > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > > device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' > > class = mass storage > > subclass = SCSI > > em0@pci0:2:12:0: class=0x020000 card=0x01561028 chip=0x100e8086 rev=0x02 > > hdr=0x00 > > vendor = 'Intel Corporation' > > device = '82540EM Gigabit Ethernet Controller' > > class = network > > subclass = ethernet > > > > Any ideas on this one? > > > > Joe > -- Joe Marcus Clarke FreeBSD GNOME Team :: gnome@FreeBSD.org FreeNode / #freebsd-gnome http://www.FreeBSD.org/gnome [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (FreeBSD) iEYEABECAAYFAkmsQsoACgkQb2iPiv4Uz4dNYACgmNz1JM/MfK/AqL4DRJoCQm0f +SAAnjQxpmkryqEFNtTcJB9OAl+aY2YJ =gSeP -----END PGP SIGNATURE-----home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1236026060.37252.97.camel>