Date: Fri, 11 Jan 2002 07:47:00 +0100 From: Thomas Seck <tmseck@netcologne.de> To: freebsd-qa@freebsd.org Subject: Re: New cdboot ISO available Message-ID: <20020111064700.GA474@laurel.seck.home> In-Reply-To: <200201102254.g0AMsrQ06804@bmah.dyndns.org> References: <XFMail.020110015947.jhb@FreeBSD.org> <20020110224026.GA239@laurel.seck.home> <200201102254.g0AMsrQ06804@bmah.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--M9NhX3UHpAaciwkO Content-Type: text/plain; charset=us-ascii Content-Disposition: inline # Bruce A. Mah (bmah@FreeBSD.ORG): > If memory serves me right, Thomas Seck wrote: > > # John Baldwin (jhb@FreeBSD.ORG): > > > > > Please test this ISO and provide feedback to the -stable or -qa lists > > > thanks. > > > > I could successfully boot the image on a P133 and a Celeron 400. > > > > I will do some installation testing on a Duron 800 system tomorrow at > > work. > > Whether the image boots or not is less a function of what processor you > have in a machine and more a function of the motherboard and BIOS (maybe > disk controller?). For some well-known vendors, it's meaningful to say > what model a machine is. Still it's good to see you're having some > success...thanks for reporting it. Sorry, 't was too late that evening. The P133 is a 430FX system with a Gigabyte GA586 Mainboard, the Celeron sits on a Gigabyte BX2000 board. Both systems are IDE based, PIIX3 and PIIX4 respectively. dmesg are attached, for the curious. --Thomas --M9NhX3UHpAaciwkO Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.laurel" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #1: Fri Dec 28 19:15:47 CET 2001 tmseck@hardy.seck.home:/usr/obj/usr/src/sys/LAUREL Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 133637119 Hz CPU: Pentium/P54C (133.64-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 67108864 (65536K bytes) avail memory = 61956096 (60504K bytes) Preloaded elf kernel "kernel" at 0xc0351000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> at 9.0 irq 11 rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe1004000-0xe10040ff irq 10 at device 10.0 on pci0 rl0: Ethernet address: 00:48:54:3d:5d:cf miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: <RealTek 8139 10/100BaseTX> port 0x6200-0x62ff mem 0xe1005000-0xe10050ff irq 9 at device 11.0 on pci0 rl1: Ethernet address: 00:06:7b:00:a7:7b miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sbc1: <Creative ViBRA16C> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 5 drq 3,5 on isa0 pcm0: <SB16 DSP 4.13> on sbc1 IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, unlimited logging ad0: 2756MB <IBM-DCAA-32880> [5600/16/63] at ata0-master WDMA2 ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable ad2: 4125MB <FUJITSU MPD3043AT> [8940/15/63] at ata1-master WDMA2 acd0: CD-RW <4X4X32> at ata1-slave using WDMA2 Mounting root from ufs:/dev/ad0s1a WARNING: driver Coda should register devices with make_dev() (dev_t = "#Coda/0") --M9NhX3UHpAaciwkO Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.hardy" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-PRERELEASE #2: Mon Dec 31 12:05:14 CET 2001 tmseck@hardy.seck.home:/usr/obj/usr/src/sys/HARDY Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 399923411 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 402587648 (393152K bytes) avail memory = 388456448 (379352K bytes) Preloaded elf kernel "kernel" at 0xc033b000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00fdd70 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva TNT graphics accelerator> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe0000000-0xe00000ff irq 10 at device 10.0 on pci0 rl0: Ethernet address: 00:48:54:3d:60:ce miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: <AudioPCI ES1373-B> port 0xe800-0xe83f irq 5 at device 11.0 on pci0 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x3f on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in ECP+EPP mode (EPP 1.7) ppc0: FIFO with 16/16/16 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, unlimited logging ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata0-master UDMA33 ad2: 19541MB <Maxtor 92041U4> [39703/16/63] at ata1-master UDMA33 acd0: CDROM <NEC CD-ROM DRIVE:282> at ata0-slave using UDMA33 Mounting root from ufs:/dev/ad0s1a --M9NhX3UHpAaciwkO-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-qa" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020111064700.GA474>