Date: Mon, 23 Oct 2000 12:11:14 +0200 From: Len Conrad <lconrad@Go2France.com> To: freebsd-tokenring@freebsd.org Subject: Re: undefined reference to `iso88025_output Message-ID: <5.0.0.25.0.20001023115127.02e43720@mail.Go2France.com> In-Reply-To: <5.0.0.25.0.20001023044435.03bbfd40@mail.Go2France.com> References: <5.0.0.25.0.20001023013920.03176340@mail.Go2France.com>
next in thread | previous in thread | raw e-mail | index | archive | help
PIII 733 MHz Olicom OC-3140 with a cable plugged into an Olicom hub (but only device on the TRN segment) In our custom kernal built from 4.1-R CDROM, with no errors signalled during make: device oltr0 pseudo-device token But then the card is not recognized: Oct 23 11:51:54 gw0 /kernel: pcib0: <Host to PCI bridge> on motherboard Oct 23 11:51:54 gw0 /kernel: pci0: <PCI bus> on pcib0 Oct 23 11:51:54 gw0 /kernel: pcib2: <PCI to PCI bridge (vendor=1106 device=8605)> at device 1.0 on pci0 Oct 23 11:51:54 gw0 /kernel: pci1: <PCI bus> on pcib2 Oct 23 11:51:54 gw0 /kernel: pci1: <SiS 6326 SVGA controller> at 0.0 irq 11 Oct 23 11:51:54 gw0 /kernel: isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 Oct 23 11:51:54 gw0 /kernel: isa0: <ISA bus> on isab0 Oct 23 11:51:54 gw0 /kernel: atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0 Oct 23 11:51:54 gw0 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Oct 23 11:51:54 gw0 /kernel: pci0: <unknown card> (vendor=0x108d, dev=0x0004) at 14.0 irq 12 Oct 23 11:51:54 gw0 /kernel: xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xe1800000-0xe180007f irq 5 at device 15.0 on pci0 Oct 23 11:51:54 gw0 /kernel: xl0: Ethernet address: 00:01:02:b2:ad:a5 Oct 23 11:51:54 gw0 /kernel: miibus0: <MII bus> on xl0 Oct 23 11:51:54 gw0 /kernel: xlphy0: <3c905C 10/100 internal PHY> on miibus0 Oct 23 11:51:54 gw0 /kernel: xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Oct 23 11:51:54 gw0 /kernel: xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xe1000000-0xe100007f irq 10 at device 16.0 on pci0 Oct 23 11:51:54 gw0 /kernel: xl1: Ethernet address: 00:01:02:b2:ae:93 Oct 23 11:51:54 gw0 /kernel: miibus1: <MII bus> on xl1 Oct 23 11:51:54 gw0 /kernel: xlphy1: <3c905C 10/100 internal PHY> on miibus1 Oct 23 11:51:54 gw0 /kernel: xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Oct 23 11:51:54 gw0 /kernel: pcib1: <Host to PCI bridge> on motherboard Oct 23 11:51:54 gw0 /kernel: pci2: <PCI bus> on pcib1 Any suggestions? Len http://BIND8NT.MEIway.com: ISC BIND 8.2.2 p5 & 8.2.3 T6B for NT4 & W2K http://IMGate.MEIway.com: Build free, hi-perf, anti-spam mail gateways To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-tokenring" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.0.0.25.0.20001023115127.02e43720>