Date: Tue, 5 Jul 2005 11:14:18 -0700 From: perikillo <perikillo@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: Problems with xorg and my Keyboard? Message-ID: <51d7a51605070511145010ca70@mail.gmail.com> In-Reply-To: <51d7a5160506280002bdfa123@mail.gmail.com> References: <51d7a5160506280002bdfa123@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 6/28/05, perikillo <perikillo@gmail.com> wrote: > This is the 3rd week i want to setup xorg on my fresh installation > of freebsd 5.4-Release, i have install this boy almost 5 times, right > now i have on the same computer 2 hard drives to test my problems with > xorg. >=20 > This is the history: >=20 > I read the handbook about setup X11 > --->5.4 X11 Configuration >=20 > If i test that two commands: >=20 > test# Xorg -configure > test# Xorg -config xorg.conf.new >=20 > The handbook say: >=20 > "If a black and grey grid and an X mouse cursor appear, the > configuration was successful. To exit the test, just press > Ctrl+Alt+Backspace simultaneously." >=20 > Here every thing is right, appear that, and my keyboard respond, > the Keypad works, i can press "Ctrl+Alt+Backspace" and return to my > shell. >=20 > This is the /root/xorg.conf.new file: >=20 > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection >=20 > Section "Files" > RgbPath "/usr/X11R6/lib/X11/rgb" > ModulePath "/usr/X11R6/lib/modules" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/TTF/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/CID/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > EndSection >=20 > Section "Module" > Load "dbe" > Load "dri" > Load "extmod" > Load "glx" > Load "record" > Load "xtrap" > Load "freetype" > Load "type1" > EndSection >=20 > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection >=20 > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/sysmouse" > EndSection >=20 > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > HorizSync 30-70 > VertRefresh 50-140 > Option "DPMS" > EndSection >=20 > Section "Device" > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > ### [arg]: arg optional > #Option "SWcursor" # [<bool>] > #Option "RGBbits" # <i> > #Option "NoAccel" # [<bool>] > #Option "BlockWrite" # [<bool>] > #Option "FireGL3000" # [<bool>] > #Option "Overlay" # [<str>] > #Option "ShadowFB" # [<bool>] > #Option "UseFBDev" # [<bool>] > #Option "UseFlatPanel" # [<bool>] > #Option "VideoKey" # [<bool>] > Identifier "Card0" > Driver "glint" > VendorName "Texas Instruments" > BoardName "TVP4020 [Permedia 2]" > BusID "PCI:0:16:0" > EndSection >=20 > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1024x768" > EndSubSection > EndSection >=20 > This is my X.org.0.log with this setup: >=20 > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for inet6/devhora:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 >=20 > X Window System Version 6.8.2 > Release Date: 9 February 2005 > X Protocol Version 11, Revision 0, Release 6.8.2 > Build Operating System: FreeBSD 5.4 i386 [ELF] > Current Operating System: FreeBSD devhora 5.4-RELEASE-p2 FreeBSD > 5.4-RELEASE-p2 #0: Sat Jun 25 07:30:12 PDT 2005 > root@devhora:/usr/obj/usr/src/sys/DEVHORA i386 > Build Date: 04 April 2005 > Before reporting problems, check http://wiki.X.Org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (=3D=3D) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 27 23:09:14 2005 > (++) Using config file: "/root/xorg.conf.new" > (=3D=3D) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. > Entry deleted from font path. > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/= lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon= ts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.2 > X.Org Video Driver: 0.7 > X.Org XInput driver : 0.4 > X.Org Server Extension : 0.2 > X.Org Font Renderer : 0.4 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 0.7 > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 4 >=20 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D 0x800000= 00 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hd= r 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hd= r 01 > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hd= r 80 > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hd= r 00 > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hd= r 00 > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hd= r 00 > (II) PCI: 00:0f:0: chip 10b7,9050 card 0000,0000 rev 00 class 02,00,00 hd= r 00 > (II) PCI: 00:10:0: chip 104c,3d07 card 1092,0126 rev 01 class 03,00,00 hd= r 00 > (II) PCI: 00:14:0: chip 1073,000d card 1073,000d rev 03 class 04,01,00 hd= r 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is clear= ed) > (II) Bus 1 I/O range: > [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xfca00000 - 0xfcafffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xf4800000 - 0xf48fffff (0x100000) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is se= t) > (--) PCI:*(0:16:0) Texas Instruments TVP4020 [Permedia 2] rev 1, Mem @ > 0xfebe0000/17, 0xfe000000/23, 0xfd800000/23, BIOS @ 0xfebd0000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xf8000000 from 0xffffffff to > 0xf7ffffff > (II) Active PCI resource ranges: > [0] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [1] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [2] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [5] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [6] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B]E > [7] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [8] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) PCI I/O resource overlap reduced 0x0000ef00 from 0x0000efff to 0x000= 0ef7f > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [1] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [2] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6ading > extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension DEC-XTRAP > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so > (II) Module freetype: vendor=3D"X.Org Foundation & the After X-TT Project= " > compiled for 6.8.2, module version =3D 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.2 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "glint" > (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o > (II) Module glint: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 0.7 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.4 > (II) LoadModule: "kbd" > (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o > (II) Module kbd: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.4 > (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4, > pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta > (II) Primary Device is: PCI 00:10:0 > (--) Chipset ti_pm2 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [14] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [15] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [17] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [18] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (**) GLINT(0): Depth 24, (--) framebuffer bpp 32 > (=3D=3D) GLINT(0): RGB weight 888 > (=3D=3D) GLINT(0): Default visual is TrueColor > (=3D=3D) GLINT(0): Using gamma correction (1.0, 1.0, 1.0) > (=3D=3D) GLINT(0): Using HW cursor > (--) GLINT(0): Not using Linux framebuffer device > (--) GLINT(0): Chipset: "ti_pm2" > (--) GLINT(0): Linear framebuffer at 0xFD800000 > (--) GLINT(0): MMIO registers at 0xFEBE0000 > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (--) GLINT(0): VideoRAM: 8192 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 0.1.0 > ABI class: X.Org Video Driver, version 0.7 > (--) GLINT(0): FIFO Size is 256 DWORDS > (=3D=3D) GLINT(0): Min pixel clock is 16 MHz > (--) GLINT(0): Max pixel clock is 110 MHz > (II) GLINT(0): Monitor0: Using hsync range of 30.00-70.00 kHz > (II) GLINT(0): Monitor0: Using vrefresh range of 50.00-140.00 Hz > (II) GLINT(0): Clock range: 16.25 to 110.00 MHz > (II) GLINT(0): Not using default mode "320x175" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "360x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x432" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x960" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "416x312" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x864" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x768" (width too large for > virtual size) > (--) GLINT(0): Virtual size is 1024x768 (pitch 1024) > (**) GLINT(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 > 769 772 808 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 > 769 772 800 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 > 628 667 -hsync -vsync > (**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 > 604 631 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 > 604 625 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 > 643 666 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 > 605 628 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 > 603 625 +hsync +vsync > (**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 > 484 509 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 > 484 500 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 > 491 520 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 > 492 525 -hsync -vsync > (**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz > (II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 > 404 446 -hsync +vsync > (**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 > 404 445 -hsync +vsync > (**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 > 385 445 +hsync -vsync > (=3D=3D) GLINT(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.2.0 > ABI class: X.Org Video Driver, version 0.7 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 0.7 > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.2.0 > ABI class: X.Org Video Driver, version 0.7 > (II) GLINT(0): I2C bus "DDC" initialized. > (II) GLINT(0): I2C bus "Video" > init=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F60xa0000) > MX[B] > [8] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [10] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [11] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [12] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [13] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [20] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [21] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprD) > [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprD) > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (=3D=3D) GLINT(0): Write-combining range (0xfd800000,0x800000) > (II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) GLINT(0): I2C device "DDC:ddc2" removed. > (II) GLINT(0): Manufacturer: CPQ Model: 1445 Serial#: 2122565061 > (II) GLINT(0): Year: 2003 Week: 19 > (II) GLINT(0): EDID Version: 1.3 > (II) GLINT(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) GLINT(0): Sync: Separate > (II) GLINT(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 > (II) GLINT(0): Gamma: 2.09 > (II) GLINT(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) GLINT(0): First detailed timing is preferred mode > (II) GLINT(0): redX: 0.625 redY: 0.330 greenX: 0.293 greenY: 0.589 > (II) GLINT(0): blueX: 0.144 blueY: 0.067 whiteX: 0.283 whiteY: 0.298 > (II) GLINT(0): Supported VESA Video Modes: > (II) GLINT(0): 720x400@70Hz > (II) GLINT(0): 640x480@60Hz > (II) GLINT(0): 640x480@75Hz > (II) GLINT(0): 800x600@75Hz > (II) GLINT(0): 1024x768@75Hz > (II) GLINT(0): Manufacturer's mask: 0 > (II) GLINT(0): Supported Future Video Modes: > (II) GLINT(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) GLINT(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) GLINT(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) GLINT(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) GLINT(0): Supported additional Video Mode: > (II) GLINT(0): clock: 94.5 MHz Image Size: 312 x 234 mm > (II) GLINT(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 > h_blank_end 1376 h_border: 0 > (II) GLINT(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: > 808 v_border: 0 > (II) GLINT(0): Ranges: V min: 50 V max: 140 Hz, H min: 30 H max: 70 > kHz, PixClock max 110 MHz > (II) GLINT(0): Monitor name: COMPAQ 7500 > (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Offscreen Pixmaps > Driver provided WriteBitmap replacement > Driver provided WritePixmap replacement > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > (=3D=3D) GLINT(0): Backing store disabled > (=3D=3D) GLINT(0): Silken mouse enabled > (**) Option "dpms" > (**) GLINT(0): DPMS enabled > (II) GLINT(0): Initializing Xv driver rev. 4 > (II) GLINT(0): Xv frontend scaler enabled > (=3D=3D) RandR enabled > Symbol fbdevHWAdjustFrame from module > /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved! > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) Initializing built-in extension XEVIE > (**) Option "Protocol" "auto" > (**) Mouse0: Device: "/dev/sysmouse" > (**) Mouse0: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/sysmouse" > (=3D=3D) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > (=3D=3D) Mouse0: Buttons: 3 > (**) Option "CoreKeyboard" > (**) Keyboard0: Core Keyboard > (**) Option "Protocol" "standard" > (**) Keyboard0: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) Keyboard0: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) Keyboard0: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) Keyboard0: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse0: SetupAuto: protocol is SysMouse > (II) 3rd Button detected: disabling emulate3Button > *************************************************************************= ****************************** > *************************************************************************= ****************************** > But went i copy my /root/xorg.conf.new to /etc/X11/xorg.conf, and ex= ecute: >=20 > test# startx >=20 > Good appear my X-Windows system, right now iam working with > Xfce4, but my keyboard dosent answer, this is the X.org.0.log: > *************************************************************************= ****************************** > *************************************************************************= ****************************** > X Window System Version 6.8.2 > Release Date: 9 February 2005 > X Protocol Version 11, Revision 0, Release 6.8.2 > Build Operating System: FreeBSD 5.4 i386 [ELF] > Current Operating System: FreeBSD devhora 5.4-RELEASE-p2 FreeBSD > 5.4-RELEASE-p2 #0: Sat Jun 25 07:30:12 PDT 2005 > root@devhora:/usr/obj/usr/src/sys/DEVHORA i386 > Build Date: 04 April 2005 > Before reporting problems, check http://wiki.X.Org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (=3D=3D) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 27 23:13:21 2005 > (=3D=3D) Using config file: "/etc/X11/xorg.conf" > (=3D=3D) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. > Entry deleted from font path. > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/= lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon= ts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (**) ModulePath set to "/usr/X11R6/lib/modules" > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.2 > X.Org Video Driver: 0.7 > X.Org XInput driver : 0.4 > X.Org Server Extension : 0.2 > X.Org Font Renderer : 0.4 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 0.7 > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 4 >=20 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages =3D 0x03, oldVal1 =3D 0x00000000, mode1Res1 =3D 0x800000= 00 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hd= r 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hd= r 01 > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hd= r 80 > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hd= r 00 > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hd= r 00 > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hd= r 00 > (II) PCI: 00:0f:0: chip 10b7,9050 card 0000,0000 rev 00 class 02,00,00 hd= r 00 > (II) PCI: 00:10:0: chip 104c,3d07 card 1092,0126 rev 01 class 03,00,00 hd= r 00 > (II) PCI: 00:14:0: chip 1073,000d card 1073,000d rev 03 class 04,01,00 hd= r 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is clear= ed) > (II) Bus 1 I/O range: > [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xfca00000 - 0xfcafffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xf4800000 - 0xf48fffff (0x100000) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is se= t) > (--) PCI:*(0:16:0) Texas Instruments TVP4020 [Permedia 2] rev 1, Mem @ > 0xfebe0000/17, 0xfe000000/23, 0xfd800000/23, BIOS @ 0xfebd0000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xf8000000 from 0xffffffff to > 0xf7ffffff > (II) Active PCI resource ranges: > [0] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [1] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [2] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [5] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [6] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B]E > [7] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [8] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) PCI I/O resource overlap reduced 0x0000ef00 from 0x0000efff to 0x000= 0ef7f > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [1] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [2] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [5] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [6] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [7] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [8] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [14] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [15] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a > (II) Module drm: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Module GLcore: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "xtrap" > (II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a > (II) Module xtrap: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Modu=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F60 0xffe00000 > - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [17] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [18] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (**) GLINT(0): Depth 24, (--) framebuffer bpp 32 > (=3D=3D) GLINT(0): RGB weight 888 > (=3D=3D) GLINT(0): Default visual is TrueColor > (=3D=3D) GLINT(0): Using gamma correction (1.0, 1.0, 1.0) > (=3D=3D) GLINT(0): Using HW cursor > (--) GLINT(0): Not using Linux framebuffer device > (--) GLINT(0): Chipset: "ti_pm2" > (--) GLINT(0): Linear framebuffer at 0xFD800000 > (--) GLINT(0): MMIO registers at 0xFEBE0000 > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (--) GLINT(0): VideoRAM: 8192 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 0.1.0 > ABI class: X.Org Video Driver, version 0.7 > (--) GLINT(0): FIFO Size is 256 DWORDS > (=3D=3D) GLINT(0): Min pixel clock is 16 MHz > (--) GLINT(0): Max pixel clock is 110 MHz > (II) GLINT(0): Monitor0: Using hsync range of 30.00-70.00 kHz > (II) GLINT(0): Monitor0: Using vrefresh range of 50.00-140.00 Hz > (II) GLINT(0): Clock range: 16.25 to 110.00 MHz > (II) GLINT(0): Not using default mode "320x175" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "360x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x432" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x960" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "416x312" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x864" (width too large for > virtual size) > (II) GLINT(0): Not using default mode "1152x768" (width too large for > virtual size) > (--) GLINT(0): Virtual size is 1024x768 (pitch 1024) > (**) GLINT(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 > 769 772 808 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 > 769 772 800 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 > 628 667 -hsync -vsync > (**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 > 604 631 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 > 604 625 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 > 643 666 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 > 605 628 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 > 603 625 +hsync +vsync > (**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) GLINT(0): Modeline "640x480" 36.00 640 696 752 832 480 481 > 484 509 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) GLINT(0): Modeline "640x480" 31.50 640 656 720 840 480 481 > 484 500 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) GLINT(0): Modeline "640x480" 31.50 640 664 704 832 480 489 > 491 520 -hsync -vsync > (**) GLINT(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) GLINT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 > 492 525 -hsync -vsync > (**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz > (II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 > 404 446 -hsync +vsync > (**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 > 404 445 -hsync +vsync > (**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 > 385 445 +hsync -vsync > (=3D=3D) GLINT(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.2.0 > ABI class: X.Org Video Driver, version 0.7 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 0.7 > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.2.0 > ABI class: X.Org Video Driver, version 0.7 > (II) GLINT(0): I2C bus "DDC" initialized. > (II) GLINT(0): I2C bus "Video" initialized. > (--) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xfd800000 - 0xfdffffff (0x800000) MX[B] > [1] 0 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B] > [2] 0 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B] > [3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [8] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [9] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [10] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [11] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [12] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [13] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [19] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [20] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [21] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > [22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprD) > [23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprD) > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (=3D=3D) GLINT(0): Write-combining range (0xfd800000,0x800000) > (II) GLINT(0): I2C device "DDC:ddc2" registered at address 0xA0. > (II) GLINT(0): I2C device "DDC:ddc2" removed. > (II) GLINT(0): Manufacturer: CPQ Model: 1445 Serial#: 2122565061 > (II) GLINT(0): Year: 2003 Week: 19 > (II) GLINT(0): EDID Version: 1.3 > (II) GLINT(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) GLINT(0): Sync: Separate > (II) GLINT(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 > (II) GLINT(0): Gamma: 2.09 > (II) GLINT(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) GLINT(0): First detailed timing is preferred mode > (II) GLINT(0): redX: 0.625 redY: 0.330 greenX: 0.293 greenY: 0.589 > (II) GLINT(0): blueX: 0.144 blueY: 0.067 whiteX: 0.283 whiteY: 0.298 > (II) GLINT(0): Supported VESA Video Modes: > (II) GLINT(0): 720x400@70Hz > (II) GLINT(0): 640x480@60Hz > (II) GLINT(0): 640x480@75Hz > (II) GLINT(0): 800x600@75Hz > (II) GLINT(0): 1024x768@75Hz > (II) GLINT(0): Manufacturer's mask: 0 > (II) GLINT(0): Supported Future Video Modes: > (II) GLINT(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 > (II) GLINT(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 > (II) GLINT(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 > (II) GLINT(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 > (II) GLINT(0): Supported additional Video Mode: > (II) GLINT(0): clock: 94.5 MHz Image Size: 312 x 234 mm > (II) GLINT(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 > h_blank_end 1376 h_border: 0 > (II) GLINT(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: > 808 v_border: 0 > (II) GLINT(0): Ranges: V min: 50 V max: 140 Hz, H min: 30 H max: 70 > kHz, PixClock max 110 MHz > (II) GLINT(0): Monitor name: COMPAQ 7500 > (II) GLINT(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Offscreen Pixmaps > Driver provided WriteBitmap replacement > Driver provided WritePixmap replacement > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > (=3D=3D) GLINT(0): Backing store disabled > (=3D=3D) GLINT(0): Silken mouse enabled > (**) Option "dpms" > (**) GLINT(0): DPMS enabled > (II) GLINT(0): Initializing Xv driver rev. 4 > (II) GLINT(0): Xv frontend scaler enabled > (=3D=3D) RandR enabled > Symbol fbdevHWAdjustFrame from module > /usr/X11R6/lib/modules/drivers/glint_drv.o is unresolved! > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in > ext=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6tocol: > "auto" > (**) Option "CorePointer" > (**) Mouse0: Core Pointer > (**) Option "Device" "/dev/sysmouse" > (=3D=3D) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > (=3D=3D) Mouse0: Buttons: 3 > (**) Option "CoreKeyboard" > (**) Keyboard0: Core Keyboard > (**) Option "Protocol" "standard" > (**) Keyboard0: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) Keyboard0: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) Keyboard0: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) Keyboard0: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse0: SetupAuto: protocol is SysMouse >=20 > *************************************************************************= ****************************** > *************************************************************************= ****************************** > Now i setup Xorg using the command: xorgconfig >=20 > *************************************************************************= ****************************** > *************************************************************************= ****************************** > # File generated by xorgconfig. >=20 > # > # Copyright 2004 The X.Org Foundation > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software= "), > # to deal in the Software without restriction, including without limitati= on > # the rights to use, copy, modify, merge, publish, distribute, sublicense= , > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included= in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS= OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY= , > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHAL= L > # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILIT= Y, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT = OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of The X.Org Foundation sh= all > # not be used in advertising or otherwise to promote the sale, use or oth= er > # dealings in this Software without prior written authorization from > # The X.Org Foundation. > # >=20 > # ********************************************************************** > # Refer to the xorg.conf(5) man page for details about the format of > # this file. > # ********************************************************************** >=20 > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" >=20 > # This loads the DBE extension module. >=20 > Load "dbe" # Double buffer extension >=20 > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection >=20 > # This loads the font modules > Load "type1" > # Load "speedo" > Load "freetype" > # Load "xtt" >=20 > # This loads the GLX module > # Load "glx" > # This loads the DRI module > # Load "dri" >=20 > EndSection >=20 > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** >=20 > Section "Files" >=20 > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. >=20 > RgbPath "/usr/X11R6/lib/X11/rgb" >=20 > # Multiple FontPath entries are allowed (which are concatenated together)= , > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # >=20 > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/TTF/" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > # FontPath "/usr/X11R6/lib/X11/fonts/CID/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/local/" > # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" > # FontPath "/usr/X11R6/lib/X11/fonts/freefont/" >=20 > # The module search path. The default path is shown here. >=20 > # ModulePath "/usr/X11R6/lib/modules" >=20 > EndSection >=20 > # ********************************************************************** > # Server flags section. > # ********************************************************************** >=20 > Section "ServerFlags" >=20 > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging >=20 > # Option "NoTrapSignals" >=20 > # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence > # (where n is 1 through 12). This allows clients to receive these key > # events. >=20 > # Option "DontVTSwitch" >=20 > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. >=20 > # Option "DontZap" >=20 > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. >=20 > # Option "Dont Zoom" >=20 > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. >=20 > # Option "DisableVidModeExtension" >=20 > # Uncomment this to enable the use of a non-local xvidtune client. >=20 > # Option "AllowNonLocalXvidtune" >=20 > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. >=20 > # Option "DisableModInDev" >=20 > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). >=20 > # Option "AllowNonLocalModInDev" >=20 > EndSection >=20 > # ********************************************************************** > # Input devices > # ********************************************************************** >=20 > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** >=20 > Section "InputDevice" >=20 > Identifier "Keyboard1" > Driver "kbd" >=20 > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. >=20 > # Option "Protocol" "Xqueue" >=20 > Option "AutoRepeat" "500 30" >=20 > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" >=20 > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" >=20 > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc105" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" >=20 > # These are the default XKB settings for Xorg > # Option "XkbRules" "xorg" > # Option "XkbModel" "pc105" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" >=20 > # Option "XkbDisable" >=20 > Option "XkbRules" "xorg" > Option "XkbModel" "pc102" > Option "XkbLayout" "es" >=20 > EndSection >=20 >=20 > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** >=20 > Section "InputDevice" >=20 > # Identifier and driver >=20 > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Auto" > Option "Device" "/dev/sysmouse" >=20 > # Mouse-speed setting for PS/2 mouse. >=20 > # Option "Resolution" "256" >=20 > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. >=20 > # Option "Protocol" "Xqueue" >=20 > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. >=20 > # Option "BaudRate" "9600" > # Option "SampleRate" "150" >=20 > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) >=20 > # Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" >=20 > # ChordMiddle is an option for some 3-button Logitech mice >=20 > # Option "ChordMiddle" >=20 > EndSection >=20 >=20 > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the xorg.conf man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection >=20 > # ********************************************************************** > # Monitor section > # ********************************************************************** >=20 > # Any number of monitor sections may be present >=20 > Section "Monitor" >=20 > Identifier "My Monitor" >=20 > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. >=20 > HorizSync 30-70 >=20 > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies >=20 > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. >=20 > VertRefresh 50-140 >=20 > EndSection >=20 >=20 > # ********************************************************************** > # Graphics device section > # ********************************************************************** >=20 > # Any number of graphics device sections may be present >=20 > # Standard VGA Device: >=20 > Section "Device" > Identifier "Standard VGA" > VendorName "Unknown" > BoardName "Unknown" >=20 > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. >=20 > # Chipset "generic" >=20 > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section= . >=20 > Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. >=20 > # BusID "PCI:0:10:0" >=20 > # VideoRam 256 >=20 > # Clocks 25.2 28.3 >=20 > EndSection >=20 > # Device configured by xorgconfig: >=20 > Section "Device" > Identifier "Diamond Fire GL 1000 PRO" > Driver "glint" > #VideoRam 8192 > #Option "no_accel" > # Insert Clocks lines here if appropriate > EndSection >=20 >=20 > # ********************************************************************** > # Screen sections > # ********************************************************************** >=20 > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "Diamond Fire GL 1000 PRO" > Monitor "My Monitor" > DefaultDepth 24 >=20 > Subsection "Display" > Depth 8 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "1280x1024" "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "1280x1024" "1152x864" "1024x768" "800x600" > ViewPort 0 0 > EndSubsection > EndSection >=20 > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** >=20 > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. >=20 > Section "ServerLayout" >=20 > # The Identifier line must be present > Identifier "Simple Layout" >=20 > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. >=20 > Screen "Screen 1" >=20 > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". >=20 > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" >=20 > EndSection >=20 > # Section "DRI" > # Mode 0666 > # EndSection >=20 > *************************************************************************= ****************************** > *************************************************************************= ****************************** > This is my X.org.0.log with this setup > *************************************************************************= ****************************** > *************************************************************************= ****************************** >=20 > X Window System Version 6.8.2 > Release Date: 9 February 2005 > X Protocol Version 11, Revision 0, Release 6.8.2 > Build Operating System: FreeBSD 5.4 i386 [ELF] > Current Operating System: FreeBSD devhora 5.4-RELEASE-p2 FreeBSD > 5.4-RELEASE-p2 #0: Sat Jun 25 07:30:12 PDT 2005 > root@devhora:/usr/obj/usr/src/sys/DEVHORA i386 > Build Date: 04 April 2005 > Before reporting problems, check http://wiki.X.Org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (=3D=3D) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 27 23:20:30 2005 > (=3D=3D) Using config file: "/etc/X11/xorg.conf" > (=3D=3D) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "My Monitor" > (**) | |-->Device "Diamond Fire GL 1000 PRO" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/lo= cal/". > Entry deleted from font path. > (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/= lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon= ts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (=3D=3D) ModulePath set to "/usr/X11R6/lib/modules" > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.2 > X.Org Video Driver: 0.7 > X.Org XInput driver : 0.4 > X.Org Server Extension : 0.2 > X.Org Font Renderer : 0.4 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > ABI class: X.Org Video Driver, version 0.7 > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 4 >=20 > (II) PCI: Probing config > ty=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F62] > -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [5] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [6] -1 0 0x0000ef00 - 0x0000efff (0x100) IX[B]E > [7] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [8] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) PCI I/O resource overlap reduced 0x0000ef00 from 0x0000efff to 0x000= 0ef7f > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [1] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [2] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [3] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [4] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [5] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [6] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [7] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [8] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [14] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [15] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.2 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so > (II) Module freetype: vendor=3D"X.Org Foundation & the After X-TT Project= " > compiled for 6.8.2, module version =3D 2.1.0 > Module class: X.Org Font Renderer > ABI class: X.Org Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "glint" > (II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o > (II) Module glint: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 0.7 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.4 > (II) LoadModule: "kbd" > (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o > (II) Module kbd: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 1.0.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 0.4 > (II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4, > pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta > (II) Primary Device is: PCI 00:10:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ti_pm2 found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [14] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [15] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xfebb8000 - 0xfebbffff (0x8000) MX[B]E > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]EO > [7] -1 0 0xfebd0000 - 0xfebdffff (0x10000) MX[B](B) > [8] -1 0 0xfd800000 - 0xfdffffff (0x800000) MX[B](B) > [9] -1 0 0xfe000000 - 0xfe7fffff (0x800000) MX[B](B) > [10] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B) > [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [16] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[B]E > [17] -1 0 0x0000ef80 - 0x0000efff (0x80) IX[B]E > [18] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E > [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (**) GLINT(0): Depth 24, (--) framebuffer bpp 32 > (=3D=3D) GLINT(0): RGB weight 888 > (=3D=3D) GLINT(0): Default visual is TrueColor > (=3D=3D) GLINT(0): Using gamma correction (1.0, 1.0, 1.0) > (=3D=3D) GLINT(0): Using HW cursor > (--) GLINT(0): Not using Linux framebuffer device > (--) GLINT(0): Chipset: "ti_pm2" > (--) GLINT(0): Linear framebuffer at 0xFD800000 > (--) GLINT(0): MMIO registers at 0xFEBE0000 > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (=3D=3D) GLINT(0): Write-combining range (0xfebe0000,0x20000) was already= clear > (--) GLINT(0): VideoRAM: 8192 kByte > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor=3D"X.Org Foundation" > compiled for 6.8.2, module version =3D 0.1.0 > ABI class: X.Org Video Driver, version 0.7 > (--) GLINT(0): FIFO Size is 256 DWORDS > (=3D=3D) GLINT(0): Min pixel clock is 16 MHz > (--) GLINT(0): Max pixel clock is 110 MHz > (II) GLINT(0): My Monitor: Using hsync range of 30.00-70.00 kHz > (II) GLINT(0): My Monitor: Using vrefresh range of 50.00-140.00 Hz > (II) GLINT(0): Clock range: 16.25 to 110.00 MHz > (II) GLINT(0): Not using default mode "320x175" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "360x200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "320x240" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "400x300" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "512x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x432" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x960" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x480" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1280x1024" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "640x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1600x1200" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x600" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1792x1344" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "896x672" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1856x1392" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "928x696" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "416x312" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "576x384" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1400x1050" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "700x525" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "800x512" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "1920x1440" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "960x720" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (II) GLINT(0): Not using default mode "2048x1536" (insufficient memory fo= r mode) > (II) GLINT(0): Not using default mode "1024x768" (bad mode > clock/interlace/doublescan) > (--) GLINT(0): Virtual size is 1280x1024 (pitch 1280) > (**) GLINT(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz > (II) GLINT(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 > 1025 1028 1066 +hsync +vsync > (**) GLINT(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz > (II) GLINT(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 > 865 868 900 +hsync +vsync > (**) GLINT(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (II) GLINT(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 > 769 772 808 +hsync +vsync > (**) GLINT(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (II) GLINT(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 > 604 631 +hsync +vsync > (**) GLINT(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz > (II) GLINT(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 > 961 964 1000 +hsync +vsync > (**) GLINT(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz > (II) GLINT(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 > 771 777 806 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) GLINT(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 > 769 772 800 +hsync +vsync > (**) GLINT(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) GLINT(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) GLINT(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 > 771 777 806 -hsync -vsync > (**) GLINT(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) GLINT(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 > 628 667 -hsync -vsync > (**) GLINT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) GLINT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 > 604 625 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) GLINT(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 > 643 666 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) GLINT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 > 605 628 +hsync +vsync > (**) GLINT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) GLINT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 > 603 625 +hsync +vsync > (**) GLINT(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (II) GL=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6= =F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F6=F60 > 656 752 800 480 490 492 525 -hsync -vsync > (**) GLINT(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz > (II) GLINT(0): Modeline "720x400" 35.50 720 756 828 936 400 401 > 404 446 -hsync +vsync > (**) GLINT(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x400" 31.50 640 672 736 832 400 401 > 404 445 -hsync +vsync > (**) GLINT(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz > (II) GLINT(0): Modeline "640x350" 31.50 640 672 736 832 350 382 > 385 445 +hsync -vsync > (=3D=3D) GLINT(0): DPI set to (75, 75) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor=3D"X.Org Foundati... >=20 > [Message clipped] Ok, after try with freebsd 5.2.1 and make the buildworld stuff. I install Xorg 6.7.0 from packages and look this my keyboard is working on X, but here dosent appear the kbd driver, we still use keyboard. I will try now with Freebsd 5.3 and see the result, the thing here is that maybe the new driver(kbd) need to be check. Thanks to all.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51d7a51605070511145010ca70>