Date: Thu, 9 Jan 2003 22:21:50 -0500 (EST) From: "Kevin S. Brackett" <ksb@platypusgroup.com> To: mobile@freebsd.org Subject: Re: netgear MA311 not wanting to work with ibook. Message-ID: <20030109222054.V47612@tsunami.platypusgroup.com> In-Reply-To: <20030109172836.B40641@tsunami.platypusgroup.com> References: <20030109172836.B40641@tsunami.platypusgroup.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Okay, sorry to reply my own email, but it's getting weirder, i can ping other ips on the subnet, just not the hostap server (or any ips connected to it)... any ideas? On Thu, 9 Jan 2003, Kevin S. Brackett wrote: > The card from dmesg: > > wi0: <Intersil Prism2.5> mem 0xef001000-0xef001fff irq 3 at device 9.0 on > pci0 > wi0: 802.11 address: 00:09:5b:12:09:8f > wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) > wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06 > > This is what i'm using to get it going: > > /sbin/sysctl net.link.ether.bridge=1 > /sbin/sysctl net.link.ether.bridge_cfg="wi0 xl0" > /sbin/sysctl net.inet.ip.forwarding=1 > /sbin/ifconfig wi0 ssid ABYSS mediaopt hostap debug up > > ifconfig: > > xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 > options=3<RXCSUM,TXCSUM> > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > inet6 fe80::201:2ff:fe29:411d%xl0 prefixlen 64 scopeid 0x1 > ether 00:01:02:29:41:1d > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > wi0: flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu > 1500 > inet6 fe80::209:5bff:fe12:98f%wi0 prefixlen 64 scopeid 0x2 > ether 00:09:5b:12:09:8f > media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps > <host > ap>) > status: associated > ssid ABYSS 1:ABYSS > stationname "FreeBSD WaveLAN/IEEE node" > channel 3 authmode OPEN powersavemode OFF powersavesleep 100 > wepmode OFF weptxkey 1 > > Debugging information: > > wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c > wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c > wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c > wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c > wi_start: dropping unassoc dst 00:60:b0:a2:9a:27 > wihap_mgmt_input: len=6 MGMT: auth: > wihap_auth_req: station 00:30:65:0a:8a:b7 algo=0x0 seq=0x1 > wihap_auth_req: new station > wihap_auth_req: returns status=0x0 > wihap_mgmt_input: len=17 MGMT: assoc req: > wihap_assoc_req: from station 00:30:65:0a:8a:b7 > wihap_assoc_req: returns status=0x0 > > Using 5.0-CURRENT from a few weeks ago; here's something odd... i have the > ibook set to use DHCP, and the hostap gateway is running isc-dhcpd, and > the ibook is getting the DHCP information and the ibooks signal bar is > about 90% full. > > > any ideas? > > TIA > - kevin > > PS: please CC: replies :) > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030109222054.V47612>