Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 10 Dec 2003 01:12:23 +0300
From:      "Sergey A. Osokin" <osa@FreeBSD.org.ru>
To:        Mauritz Sundell <mauritz.sundell@home.se>
Cc:        current@FreeBSD.org
Subject:   Re: cbb still don't work?
Message-ID:  <20031209221223.GT23446@freebsd.org.ru>
In-Reply-To: <1070984617.528d0ce0mauritz.sundell@home.se>
References:  <1070984617.528d0ce0mauritz.sundell@home.se>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Mauritz Sundell,
thank you for quick responce.

On Tue, Dec 09, 2003 at 04:43:37PM +0100, Mauritz Sundell wrote:
> I have had problems with my cbb/pcic on fbsd 5.x
> but my problem was that the device was mapped on
> the memory bios have assigned  to fxp0 (on an Compaq Evo N160,
> it has the same pccard bridge device)
> 
> My solution was to set
> hw.cbb.start_memory="0xd0208000"
> in /boot/device.hints
> 
> You could try to add
> hw.cbb.start_memory="0xd0202000"
> in your /boot/device.hints
> even if yours cbb-devices seems to get unique memory
> already (at 0x88000000 resp. 0x88001000)

Hm, it's can't help me :-(
What is the algorithm to find a right value for cbb-devices?

> I tried to use
> device          cbb
> device          pccard
> device          cardbus
> instead of
> device         pcic
> device         card    1
> 
> but it still do not works for my HP Omnibook 6100.
> ....
> FreeBSD 5.2-CURRENT #0: Tue Dec  9 17:11:40 MSK 2003
> ....
> cbb0: <TI1420 PCI-CardBus Bridge> at device 5.0 on pci2
> start (88000000) < sc->membase (d0200000)
> end (ffffffff) > sc->memlimit (d02fffff)
> pcib2: device cbb0 requested decoded memory range 0x88000000-0xffffffff
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKA)
> pcib2: slot 5 INTA is routed to irq 10
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
>   0x00: 0xac51104c 0x02100007 0x06070000 0x00822000 
>   0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010a 
>   0x40: 0x001a103c 0x00000001 0x00000000 0x00000000 
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x80: 0x00c4b061 0x00000000 0x00000000 0x012c1272 
>   0x90: 0x416682c0 0x00000000 0x00000000 0x00000000 
>   0xa0: 0xfe420001 0x00c00000 0x00000001 0x0000001f 
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> cbb1: <TI1420 PCI-CardBus Bridge> at device 5.1 on pci2
> start (88000000) < sc->membase (d0200000)
> end (ffffffff) > sc->memlimit (d02fffff)
> pcib2: device cbb1 requested decoded memory range 0x88000000-0xffffffff
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pcib2: matched entry for 2.5.INTB (source \\_SB_.LNKB)
> pcib2: slot 5 INTB is routed to irq 10
> cbb1: [MPSAFE]
> cbb1: PCI Configuration space:
>   0x00: 0xac51104c 0x02100007 0x06070000 0x00822000 
>   0x10: 0x88001000 0x020000a0 0x20000000 0xfffff000 
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020a 
>   0x40: 0x001a103c 0x00000001 0x00000000 0x00000000 
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0x80: 0x00c49061 0x00000000 0x00000000 0x012c1272 
>   0x90: 0x416682c0 0x00000000 0x00000000 0x00000000 
>   0xa0: 0xfe420001 0x00c00000 0x00000001 0x0000001f 
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> ....
> pcib2: device pccard0 requested decoded memory range 0x88000000-0xffffffff
> CIS is too long -- truncating
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
> ....
> 
> Any idea?
> Thanks.
> 

-- 

Rgdz,                        /"\  ASCII RIBBON CAMPAIGN
Sergey Osokin aka oZZ,       \ /    AGAINST HTML MAIL
http://ozz.pp.ru/             X          AND NEWS
                             / \



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031209221223.GT23446>