Date: Wed, 19 Jan 2000 11:32:40 +0100 From: rene@xs4all.nl To: "Crist J. Clark" <cjc@cc942873-a.ewndsr1.nj.home.com> Cc: Greg Lehey <grog@lemis.com>, questions@FreeBSD.ORG Subject: Re[2]: vinum question : automatic mounting at boot, NFS? Message-ID: <9481.000119@xs4all.nl> In-Reply-To: <20000119004612.D66943@cc942873-a.ewndsr1.nj.home.com> References: <20000119004612.D66943@cc942873-a.ewndsr1.nj.home.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hija Crist,
Wednesday, January 19, 2000, 06:46:12, you seem to have written:
CJC> On Tue, Jan 18, 2000 at 05:53:16PM +0100, rene@xs4all.nl wrote:
>> Hija Greg,
>>
>> Tuesday, January 18, 2000, 12:05:30, you seem to have written:
>> GL> On Monday, 17 January 2000 at 14:17:59 +0100, rene@xs4all.nl wrote:
>> >> Hija Olaf,
>> >>
>> >> Sunday, January 16, 2000, 23:53:48, you seem to have written:
>> >>> On Sun 16 Jan 2000 at 20:54:03 +0100, rene@xs4all.nl wrote:
>> >>>
>> >>> Since it looks like the only thing that you really do by hand is:
>> >>>
>> >>>> bash-2.02# mount /dev/vinum/myvol /mnt/large
>> >>>
>> >>> putting it in /etc/fstab should be enough. Something like
>> >>>
>> >>> # filesys mount point type access dump fsck
>> >>> # location + opts freq pass
>> >>>
>> >>> /dev/vinum/myvol /mnt/large ffs rw 1 2
>> >>>
>> >>> should do it. Unless maybe this tries to mount it too early in the boot
>> >>> sequence. In that case, make it
>> >>>
>> >>> /dev/vinum/myvol /mnt/large ffs rw,noauto 1 2
>> >>>
>> >>> so that the initial mount -a will not try to mount it yet, and put the
>> >>> following in /etc/rc.local:
>> >>>
>> >>> mount /mnt/large
>> >>>
>> >>> -Olaf (none of this is vinum-sprecific, by te way).
>> >>
>> >> Thanx for your reply. However, it didn't quite fix it; (after booting)
>> >>
>> >> bash-2.02# mount /mnt/large
>> >> mount: exec mount_ffs not found in /sbin, /usr/sbin: No such file or directory
>> >>
>> >> if I change the type field in /etc/fstab to 'ufs' instead of 'ffs', I
>> >> get a filesystemcheck error; /dev/vinum/rmyvol: device not configured
>> >>
>> >> this is probably coz at that time, vinum hasn't started yet.
>>
>> GL> Correct. You should set start_vinum in your rc.conf.
>>
>> messenger:/usr/home/rene # cat /etc/rc.conf
>> # This file now contains just the overrides from /etc/defaults/rc.conf
>> # please make all changes to this file.
>>
>> # -- sysinstall generated deltas -- #
>> gateway_enable="YES"
>> nfs_server_enable="YES"
>> network_interfaces="xl0 lo0"
>> ifconfig_xl0="inet 194.109.23.212 netmask 255.255.255.240"
>> defaultrouter="194.109.23.209"
>> hostname="messenger"
>> domainname="outerheaven.net"
>> inetd_enable="NO"
>> portmap_enable="NO"
>> nfs_client_enable="NO"
>> rpc_statd_enable="NO"
>> syslogd_flags="-s"
>> start_vinum="YES"
>>
>>
>> >> for completeness, the line from fstab:
>> >>
>> >> /dev/vinum/myvol /mnt/large ufs rw,noauto 1 2
>>
>> GL> Was that a complete statement?
>>
>> I don't quite understand your question...
CJC> OK, I'm really begining to get tired of this thread. Can we start
CJC> over?
sure, but most of the info you requested I posted already, earlier in
the thread.
CJC> A couple of questions and ideas:
CJC> 1) What FreeBSD version are you running?
bash-2.02# uname -a
FreeBSD messenger 3.2-STABLE FreeBSD 3.2-STABLE #3: Mon Dec 13 18:59:30 CET 1999
nger:/usr/src/sys/compile/MESSENGER-EXPERIMENTAL i386
CJC> 2) What does the dmesg output look like after a boot (before manually
CJC> trying to run anything)? Are there any messages to the screen not
CJC> making it to the dmesg?
bash-2.02# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-STABLE #3: Mon Dec 13 18:59:30 CET 1999
rene@messenger:/usr/src/sys/compile/MESSENGER-EXPERIMENTAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 233864315 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62291968 (60832K bytes)
Preloaded elf kernel "kernel" at 0xc02c8000.
Probing for devices on PCI bus 0:
chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0
chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0
chip2: <PCI to 0x80 bridge (vendor=10b9 device=7101)> rev 0x00 on pci0.3.0
chip3: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xc3 on pci0.7.0
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 5 on pci0.10.0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 12 on pci0.11.0
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 10 on pci0.12.0
xl0: Ethernet address: 00:10:5a:c0:33:b3
xl0: autoneg complete, link status good (half-duplex, 100Mbps)
ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0xc1 int a irq 0 on pci0.15.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: TCM5095 [0x95506d50] Serial 0xaf92f149 Comp ID: @@@0000 [0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351010>
wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <IBM-DTTA-351010>
wd1: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 1 (atapi): <HITACHI CDR-7730/0008a>, removable, iordy
acd0: drive speed 689KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 128 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM unknown medium, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: utp[*UTP*] address 00:20:af:92:f1:49
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
ccd0-3: Concatenated disk drivers
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ahc0 bus 0 target 4 lun 0
da0: <IBM DORS-32160 S82C> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <IBM DDRS-39130 S71D> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
WARNING: / was not properly dismounted
Extra Messages: yes, about /dev/vinum/rmyvol not being checkable. Get
dumped in /bin/sh, to fix it myself. Exit the shell, which bypasses
/etc/fstab disk-checks.mou
CJC> 3) What does dmesg look like after successfully starting vinum by hand?
bash-2.02# vinum start
bash-2.02# dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-STABLE #3: Mon Dec 13 18:59:30 CET 1999
rene@messenger:/usr/src/sys/compile/MESSENGER-EXPERIMENTAL
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 233864315 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62291968 (60832K bytes)
Preloaded elf kernel "kernel" at 0xc02c8000.
Probing for devices on PCI bus 0:
chip0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> rev 0x04 on pci0.0.0
chip1: <AcerLabs M5243 PCI-PCI bridge> rev 0x04 on pci0.1.0
chip2: <PCI to 0x80 bridge (vendor=10b9 device=7101)> rev 0x00 on pci0.3.
chip3: <AcerLabs M1533 portable PCI-ISA bridge> rev 0xc3 on pci0.7.0
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 5 on pci0.10.0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 12 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 10 on pci0.12.
xl0: Ethernet address: 00:10:5a:c0:33:b3
xl0: autoneg complete, link status good (half-duplex, 100Mbps)
ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0xc1
n pci0.15.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: TCM5095 [0x95506d50] Serial 0xaf92f149 Comp ID: @@@0000
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351010>
wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <IBM-DTTA-351010>
wd1: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 1 (atapi): <HITACHI CDR-7730/0008a>, removable, iordy
acd0: drive speed 689KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 128 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM unknown medium, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: utp[*UTP*] address 00:20:af:92:f1:49
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
ccd0-3: Concatenated disk drivers
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ahc0 bus 0 target 4 lun 0
da0: <IBM DORS-32160 S82C> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1 at ahc0 bus 0 target 6 lun 0
da1: <IBM DDRS-39130 S71D> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
WARNING: / was not properly dismounted
vinum: loaded
vinum: reading configuration from /dev/wd1d
vinum: updating configuration from /dev/wd0d
vinum: updating configuration from /dev/da1d
bash-2.02# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da0s1a 31743 24385 4819 83% /
procfs 4 4 0 100% /proc
/dev/da0s1f 1853547 631971 1073293 37% /usr
/dev/da0s1e 29751 2785 24586 10% /var
bash-2.02# mount /mnt/large
bash-2.02# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da0s1a 31743 24385 4819 83% /
procfs 4 4 0 100% /proc
/dev/da0s1f 1853547 631971 1073293 37% /usr
/dev/da0s1e 29751 2785 24586 10% /var
/dev/vinum/myvol 27847756 1 25619935 0% /mnt/large
CJC> 4) The 'start_vinum' is set at the end of the rc.conf, is there a
CJC> carriage return after it? Make sure there's a blank line or two to
CJC> be safe (I like to peg a line with '#End' at the end of all of my
CJC> scripts just to be sure).
There was. Appended your '#end' line anyway.
CJC> 5) Does vinum try to start before all SCSI devices (HDDs are the
CJC> worry) have settled and been discovered?
Don't quite know. Could be possible.
Greetings,
rene <mailto:rene@xs4all.nl>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9481.000119>