Date: Mon, 6 Mar 2000 22:02:34 -0600 (CST) From: Chris Byrnes <chrisb@highstability.com> To: Archie Cobbs <archie@whistle.com> Cc: freebsd-stable@FreeBSD.ORG, freebsd-hackers@FreeBSD.ORG Subject: Re: Help: interrupt timeout Message-ID: <Pine.BSF.4.10.10003062202020.78468-100000@ns1.highstability.com> In-Reply-To: <200003070357.TAA38892@bubba.whistle.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've had the same problem. Most people have told me that I have to replace the hard drive. I never had the problem before 3.4. Maybe that's just a coincidence, though. -- Chris Byrnes (CB5820) Network Engineer, High Stability Internet Services http://www.highstability.com On Mon, 6 Mar 2000, Archie Cobbs wrote: > My laptop running 3.4-RELEASE decided it doesn't want to boot. > It was uncleanly shut down via the power switch by someone > who thought they were shutting down a different machine. > > Now when it boots, running fsck gives this result: > > > chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 > > chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 > > ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 > > ... > > wdc0 at 0x1f0-0x3f7 irq 14 on isa > > wdc0: unit 0 (wd0): <TOSHIBA MK6409MAV> > > wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T 512 B/S > > wdc1 at 0x170-0x177 irq 15 on isa > > wdc1: unit 0 (atapi): <MATSHITADVD-ROM SR-8171/058A>, removable, accel, dma, iordis > > ... > > # fsck / > > *** /dev/rwd0s3a > > *** Last Mounted on / > > *** Root file system > > *** Phase 1 - Check Blocks and Sizes > > wd0: interrupt timeout (status 58<rdy,seekdone> error 0) > > wd0: wdtimeout DMA status 4 > > wd0: interrupt timeout (status 50<rdy,seekdone> error 1<no_dam>) > > wd0: wdtimeout DMA status 4 > > wd0: interrupt timeout (status 50<rdy,seekdone> error 1<no_dam>) > > wd0: wdtimeout DMA status 4 > > wd0: interrupt timeout (status 50<rdy,seekdone> error 1<no_dam>) > > wd0: wdtimeout DMA status 4 > > wd0: interrupt timeout (status 50<rdy,seekdone> error 1<no_dam>) > > wd0: wdtimeout DMA status 4 > > wd0: Last time I say: interrupt timeout. Probably a portable PC. (status 50<rdy,seekdone> error 1<no_dam>) > > Well, yes in fact it is a portable PC :-) It just seems to hang > at this point, even though there seems to be disk activity (like > it's continuously retrying). > > This machine has run fine under this kernel since I installed > 3.4-REL a month ago or so. This same problem happens with the > 3.4-REL GENERIC kernel. > > Before this, it was running fine with a 3.0++ kernel and never > had this problem after many power cycles. > > Is there any hope in getting this machine to work again?? > Howabout disabling DMA? Is there some way to do that? > > Thanks for any pointers.. > -Archie > > ___________________________________________________________________________ > Archie Cobbs * Whistle Communications, Inc. * http://www.whistle.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10003062202020.78468-100000>