Date: Thu, 07 Aug 2003 17:40:37 -0300 From: Alexandre Biancalana <ale@seudns.net> To: freebsd-current@freebsd.org Subject: Re: ML370 crash Message-ID: <3F32B945.7080108@seudns.net> In-Reply-To: <3F315668.8090607@seudns.net> References: <3F315668.8090607@seudns.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi There, Following John Cagle instructions, I made an trace at db> prompt, the result can be viewed at http://www.seudns.net/ftp/ale/Pictures/ml370/trace.jpg, the crash can be viewed at http://www.seudns.net/ftp/ale/Pictures/ml370/crash_boot.jpg As John told me, It looks like a bug that involves the ida driver. What can I do ?? Regards, Alexandre Biancalana Alexandre Biancalana wrote: > Hi All, > > I have a Compaq ML370 that freezes during 5.1-RELEASE boot, I tryed > the default boot, single user boot and disable ACPI boot. I installed > 4.8-RELEASE and then upgraded to CURRENT, make buildworld and > buildkernel was perfect, after make installkernel, I made a copy of > /sys/i386/conf/GENERIC.hints to /boot/device.hints and the command ran > ok too, but when booting with new kernel (/boot/kernel/kernel), the > server freeze's at same point, after kernel display vga0 device, but now > with an error message and a prompt to an debugger. > > Follow in attached an dmesg from 4.8-RELEASE that is working and a > picture off machine's display at crash moment. > > Some Idea ?! > > Best Regards, > > Alexandre Biancalana > > > ------------------------------------------------------------------------ > > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 > root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel Pentium III (731.02-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x683 Stepping = 3 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 1073725440 (1048560K bytes) > avail memory = 1039876096 (1015504K bytes) > Preloaded elf kernel "kernel" at 0xc051d000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > sym0: <1510d> port 0x2000-0x20ff mem 0xc6efe000-0xc6efefff,0xc6effc00-0xc6efffff irq 11 at device 1.0 on pci0 > sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking > sym1: <1510d> port 0x2400-0x24ff mem 0xc6efc000-0xc6efcfff,0xc6efdc00-0xc6efdfff irq 15 at device 1.1 on pci0 > sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xc6d00000-0xc6dfffff,0xc6efb000-0xc6efbfff irq 5 at device 2.0 on pci0 > fxp0: Ethernet address 00:50:8b:de:72:26 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pci0: <ATI Mach64-GV graphics accelerator> at 3.0 > pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x3000-0x307f mem 0xc6cfee80-0xc6cfeeff irq 5 at device 5.0 on pci0 > xl0: Ethernet address: 00:10:4b:c6:38:24 > miibus1: <MII bus> on xl0 > xlphy0: <3Com internal media interface> on miibus1 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x3080-0x308f at device 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard > pci3: <PCI bus> on pcib3 > ida0: <Compaq Smart Array 431 controller> port 0x4000-0x40ff mem 0xc6fff000-0xc6ffffff irq 10 at device 3.0 on pci3 > ida0: drives=2 firm_rev=1.02 > idad0: <Compaq Logical Drive> on ida0 > idad0: 17359MB (35553120 sectors), blocksize=512 > idad1: <Compaq Logical Drive> on ida0 > idad1: 17359MB (35553120 sectors), blocksize=512 > eisa0: <EISA bus> on motherboard > mainboard0: <CPQ0690 (System Board)> on eisa0 slot 0 > orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ata0-slave: ATAPI identify retries exceeded > acd0: CDROM <COMPAQ CDR-8435> at ata0-master PIO4 > Waiting 15 seconds for SCSI devices to settle > Mounting root from ufs:/dev/idad0s2a > > > ------------------------------------------------------------------------ > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F32B945.7080108>