Date: Sun, 28 Sep 2014 00:25:52 -0700 From: russ.haley@gmail.com To: Warner Losh <imp@bsdimp.com> Cc: freebsd-arm@freebsd.org, Rui Paulo <rpaulo@me.com> Subject: Re: Digi CCWMX53 Message-ID: <20140928072552.6008977.32039.589@gmail.com> In-Reply-To: <A73CCB0A-2ED9-4505-BACD-264F768D2D72@bsdimp.com> References: <CABx9NuQr%2BdEb_yj3ypEe6Sb_qPY%2BqP74n0x1K5=_K6Zoio2vkw@mail.gmail.com> <C439A1ED-8AA0-4CA5-B375-D80E8BD4C624@me.com> <CABx9NuTU=E7ceQ=5=Qk%2B=e9jwLjnJZf2Lr70d7XbwAYRD5nd7Q@mail.gmail.com> <E12E12A8-32B9-4B26-B6C4-65DF9F43C396@me.com> <CABx9NuT31dVubDCCt7M5DGhoNqu0a9saxuB1fb9naq42Z8mi%2BA@mail.gmail.com> <A73CCB0A-2ED9-4505-BACD-264F768D2D72@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'll check at work on Tuesday when I'm in.=C2=A0 Thanks, Russ Sent from my BlackBerry 10 smartphone. =C2=A0 Original Message =C2=A0 From: Warner Losh Sent: Sunday, September 28, 2014 12:12 AM To: Russell Haley Cc: Rui Paulo; freebsd-arm@freebsd.org Subject: Re: Digi CCWMX53 On Sep 27, 2014, at 9:49 PM, Russell Haley <russ.haley@gmail.com> wrote: > I will attempt to load the kernel from tftp as soon as I can. I will need > to figure out how to get ethernet to the unit. >=20 > I know nothing about u-boot so forgive my ignorance but I was hoping to > modify the Arndale configuration to work such as: >=20 > # mmc read 1 0x70800000 0x800 0x1800; > #go 0x70800000; >=20 > and then point the rootfs to /dev/da1s1 >=20 > On another note, do you know where I could find out more about the missing > MTD support? A spec for the NAND controller is needed to make that work=E2=80=A6 Is one = about? Warner > BTW, I thought your wireless mesh stuff was pretty cool. Ah, so many cool > projects, so little time... >=20 > Thanks, >=20 > Russ >=20 > On Sat, Sep 27, 2014 at 2:35 PM, Rui Paulo <rpaulo@me.com> wrote: >=20 >> On Sep 27, 2014, at 13:31, Russell Haley <russ.haley@gmail.com> wrote: >>>=20 >>> Rui, >>>=20 >>> So no MTD means the NAND on the SOM is out, but can I boot the kernel >> and load rootfs from the microSD, like in this example: >>> =E2=80=A2 >>> ARNDALE5250 # setenv bootcmd "fatload mmc 0:1 0x40f00000 kernel.bin; go >> 0x40f00000" >>>=20 >>> ARNDALE5250 # saveenv >>>=20 >>> ARNDALE5250 # boot >>=20 >> You can't use the Arndale config since the load addresses are different. >> You should be able to load a kernel from the network. Can you do that? >>=20 >> -- >> Rui Paulo >>=20 >>=20 >>=20 >>=20 > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140928072552.6008977.32039.589>