Date: Tue, 22 Nov 2005 08:20:49 GMT From: Neil Hoggarth <neil@hoggarth.me.uk> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/89409: 6-STABLE requires ACPI disabled, 5-STABLE did not (regression) Message-ID: <200511220820.jAM8KnZd045675@www.freebsd.org> Resent-Message-ID: <200511220830.jAM8UGWw082149@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 89409 >Category: i386 >Synopsis: 6-STABLE requires ACPI disabled, 5-STABLE did not (regression) >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Nov 22 08:30:16 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Neil Hoggarth >Release: 6.0-STABLE >Organization: >Environment: FreeBSD shadowfax.localdomain 6.0-STABLE FreeBSD 6.0-STABLE #0: Sun Nov 20 18:25:47 GMT 2005 root@shadowfax.localdomain:/usr/obj/home/src/sys/GENERIC i386 >Description: I'm posting this in response to Mark Linimon's call for reports of regressions in 6-STABLE wrt 5-STABLE (http://lists.freebsd.org/pipermail/freebsd-stable/2005-November/019730.html) This may be a duplicate of PR 87568, but I wasn't sure, so I thought I'd open this. I have a system which ran extremely reliably under RELENG_5 (from 5.3-RELEASE onwards). The machine suffers from frequent hard lockups when running a RELENG_6 kernel. The problem can be entirely worked around by disabling ACPI ("hint.acpi.0.disabled=1" in /boot/loader.conf). No such precaution was necessary with a RELENG_5 kernel. The system is an AMD Athlon XP 2500+ processor on an Abit NF-7S v2 motherboard, with BIOS version "nVidia-nForce-6A61BA1BC-26". The system has a HighPoint Rocket RAID 1640 SATA card which I suspect (but have not proven) to be implicated in the problems - freezes appear to be related to disk activity. I've tried building a kernel with GDB, INVARIENTS and WITNESS in an attempt to find out more, and not had any more success: the kernel still locks up, doesn't panic or output any more diagnostics when it does. The system will not break to the debugger when frozen. dmesg: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-STABLE #0: Sun Nov 20 18:25:47 GMT 2005 root@shadowfax.localdomain:/usr/obj/home/src/sys/GENERIC mptable_probe: MP Config Table has bad signature: \^S\^F Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow> real memory = 1073676288 (1023 MB) avail memory = 1037545472 (989 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard pci0: <PCI bus> on pcib0 $PIR: No matching entry for 0.1.INTA $PIR: No matching entry for 0.2.INTA $PIR: No matching entry for 0.2.INTB $PIR: No matching entry for 0.2.INTC $PIR: No matching entry for 0.13.INTA agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device 0.0 on pci0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xe0001000-0xe0001fff irq 5 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 10 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 11 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 pci1: <PCI bus> on pcib1 pcm0: <Creative CT5880-C> port 0x9000-0x903f irq 5 at device 7.0 on pci1 pcm0: <TriTech TR28602 AC97 Codec> pcm0: [GIANT-LOCKED] em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9400-0x943f mem 0xdf020000-0xdf03ffff,0xdf000000-0xdf01ffff irq 10 at device 8.0 on pci1 em0: Ethernet address: 00:0e:0c:06:c2:3a em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9800-0x983f mem 0xdf040000-0xdf05ffff,0xdf060000-0xdf07ffff irq 11 at device 9.0 on pci1 em1: Ethernet address: 00:0e:0c:06:c2:34 atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port 0x9c00-0x9c07,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xacff irq 15 at device 10.0 on pci1 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port 0xb000-0xb007,0xb400-0xb403,0xb800-0xb807,0xbc00-0xbc03,0xc000-0xc0ff irq 15 at device 10.1 on pci1 ata4: <ATA channel 0> on atapci1 ata5: <ATA channel 1> on atapci1 atapci2: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 fwohci0: <1394 Open Host Controller Interface> mem 0xe0002000-0xe00027ff,0xe0003000-0xe000303f irq 15 at device 13.0 on pci0 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:00:50:8d:fc:92:11 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:00:fc:92:11 fwe0: Ethernet address: 02:00:00:fc:92:11 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcib2: <PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 nvidia0: <GeForce FX 5200> mem 0xdc000000-0xdcffffff,0xd0000000-0xd7ffffff irq 5 at device 0.0 on pci2 nvidia0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd17ff,0xd2000-0xd37ff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) uscanner0: EPSON EPSON Scanner 010F, rev 1.10/1.00, addr 2 Timecounter "TSC" frequency 1830009939 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-109/1.40> at ata0-master UDMA66 ad4: 286188MB <Maxtor 6B300S0 BANC1BY0> at ata2-master UDMA133 ad6: 286188MB <Maxtor 6B300S0 BANC1980> at ata3-master UDMA133 ad8: 152627MB <Seagate ST3160023AS 3.18> at ata4-master UDMA133 ad10: 152627MB <Seagate ST3160023AS 3.18> at ata5-master UDMA133 GEOM_MIRROR: Device m0 created (id=2355982473). GEOM_MIRROR: Device m0: provider ad4 detected. GEOM_MIRROR: Device m0: provider ad6 detected. GEOM_MIRROR: Device m0: provider ad6 activated. GEOM_MIRROR: Device m0: provider ad4 activated. GEOM_MIRROR: Device m0: provider mirror/m0 launched. GEOM_MIRROR: Device m1 created (id=3939754819). GEOM_MIRROR: Device m1: provider ad8 detected. GEOM_MIRROR: Device m1: provider ad10 detected. GEOM_MIRROR: Device m1: provider ad10 activated. GEOM_MIRROR: Device m1: provider ad8 activated. GEOM_MIRROR: Device m1: provider mirror/m1 launched. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511220820.jAM8KnZd045675>